Relationships between soil saturated hydraulic conductivity ($K_s$) and porosity (${\phi}$) have been developed over many years; however, use of these relationships for evaluating rain-induced seals is limited mainly because of difficulties in estimating seal pore-size characteristics. The objectives of this study were to evaluate the $K_s$ of soil surface seals over a range of thicknesses, where seal thickness was determined using a High-Resolution-Computed-Tomography (HRCT) scanner, and to investigate relationships between $K_s$ and ${\phi}$ of developing seals in samples with equivalent diameters (e.d.) ${\geq}15\;{\mu}m$. A Mexico silt loam soil was packed to a bulk density (${\rho}_b$) of $1.1\;Mg\;m^{-3}$ in cylinders 160-mm i.d. by 160-mm long and subjected to $61-mm\;h^{-1}$ simulated rainfall having a kinetic energy (KE) of $25\;J\;m^{-2}\;min^{-1}$ for 7.5, 15, 30, and 60 min to create a range in seal development. Thicknesses of the seal layers were determined by analysis of HRCT images of seals. The $K_s$ values of the seals were estimated using an effective $K_s$ value ($K_{s-eff}$). The $K_s-{\phi}$ relationship was described by a Kozeny and Carmen equation, $K_s=B{\phi}^n$; where B and n are empirical constants and n = 31. This approach explained 86% of the variation between $K_s$ and ${\phi}$ within the soil seals. Knowledge of surface seal information and hydraulic conductivity can provide useful information to use in management of sites prone to sealing formation.
Plasma electrolytic oxidation(PEO) has attracted attention as a surface treatment which has high wear resistance and corrosion resistance. PEO is generally considered as cost-effective, environmentally friendly and superior in terms of coating performance. Most of studies about the PEO processes have been applied to light metals such as Al and Mg. Because the strength of Al and Mg is weaker than that of steel, there is a limit to the application. In this study, PEO process was used to form oxide coatings on Hot dipped aluminized(HDA) steel and the characteristics of the coating film according to the PEO current density were studied. The morphology was observed by SEM and component was analyzed by using EDS. The corrosion behaviors of PEO coating films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of PEO process current density, the pore size of the coating surface and the thickness of coating increased. It was confirmed that no Fe component was present on the coating surface. PEO coating films obviously showed good corrosion resistance compared with HDA. It is considered that the PEO coating acts as a barrier to protect the base material from external factors causing corrosion.
Objectives : The purpose of this study was to investigate the efficacy of Abelmoschus manihot (A-M) on the facial skin by observing the changes in the skin caused by continuous use of the essence containing A-M. Methods : Fifty-one participants were enrolled, 38 were classified as experimental group and 13 were classified as control group. Before the beginning of the test, the skin condition of the participants was investigated with the facial analyzer. An essence containing A-M was provided to the experimental group, and an essence base not containing Abelmoschus manihot was provided to the control group. Participants were asked to use the product in the morning and evening after washing their face. We checked the skin change status every 2 weeks and performed the test 3 times for 6 weeks. Results : In the case of t-zone oil and pores, there was a significant decrease in the experimental group. In the case of moisture, a significant increase was observed in the control group, but the significance was significantly increased when the essence containing A-M was used. In the case of elasticity, it was found that the experimental group continued to increase with the period of use. Conclusion : It is thought that the essence containing A-M will be effective in preventing skin aging through the reduction of t-zone oil, the size of the pores, and the increase in moisture and elasticity.
Many researches in Korea have been performed to understand the pollution of stream waters by acid mine drainage. However, few studies have been conducted regarding the effect of particulate and colloidal fractions on the transport of trace metals. To estimate harmful effects of trace metals, it is important to evaluate the particulate and colloidal metals as well as dissolved metals, because particulate and colloidal fractions of trace metals play an important role in transport of trace metals and may adversely affect habitats and organisms in riverine system. Colloids are solids with effective diameters in size range from 0.001 $\mu$m to 1 $\mu$m. According to Jone et al. (1974), metals in surface water, like Al, Fe, and Mn, require filtration with pore-size membranes smaller than 0.45 $\mu$m to define dissolved concentrations. The main objective of this study is to understand the effects of particulate, colloidal, and truly dissolved fractions on the transport and fate of trace metals in acid mine drainage. This study was conducted for the Onjeong creek in the Uljin mine area. Sampling was carried out in 13 sites, spatially covering the area from mine dumps to the downstream Onjeong reservoir. To examine the metal partitioning between particulate, colloidal, and truly dissolved fraction, we used successive filtration techniques consisting of conventional method (using 0.45 $\mu$m membranes) and tangential-flow ultrafiltration (using 0.001 $\mu$mm membranes). Ultrafiltration may seperate much smaller particles from aqueous phase (Josephson, 1984; Hernandez and Stallard, 1988). The analysis of metals were performed by inductively coupled plasma - atomic emission spectrometer (ICP-AES: model Perkin Elmer OPTIMA3000XL). Anions such as SO$_4$, Cl and NO$_3$ were measured with ion chromatograph (IC: model Dionex 120). Sample analysis is still in progress. The preliminary data show that the studied creek is severely polluted by Al, Fe, Mn, Pb and Zn. Toward upstream sites with relatively lower pH, less than 50% of Al and Fe occur in the sorbed form on particles or colloids, whereas more than 80% of Al and Fe occur in the sorbed form in downstream sites or tributaries with relatively higher pH. Less than 30% of Zn is present in particle or colloidal forms in the whole range of creek. Truly dissolved fraction of trace metals is negatively correlated with pH. The Kd values for Al, Fe and Zn consistently increase with increasing pH and decrease with increasing particle concentration.
Purpose: Hydroxyapatite(HA) has been widely used due to its chemical similarity to bone and good biocompatibility. HA is composed of macropores and micropores. Too much irregularities of the micropores are ineffective against the adhesion and proliferation of osteoblast. Many efforts have been tried to overcome these drawbacks. HA crystal coating on the irregular surface of HA scaffold, crystallized HA, is one of the method to improve cell adhesion. Meanwhile, the collagen has been incorporated with HA to create composite scaffold that chemically resembles the natural extracellular matrix components of bone. The authors proposed to examine the effect of collagen - coated crystallized HA on the adhesion and proliferation of osteoblast. Method: HA powder containing $10{\mu}m$ pore size was manufactured as 1 cm pellet size. For the making crystallized HA, 0.1 M EDTA solution was used to dissolve HA powder and heated $100^{\circ}C$ for 48 hours. Next, the crystallized HA pellets were coated with collagen (0.1, 0.5, and 1%). The osteoblasts were seeded into HA pellets and incubated for the various times (1, 5, and 9 days). After the indicating days, methylthiazol tetrazolium (MTT) assay was performed for cell proliferation and alkaline phosphatase (ALP) activty was measured for bone formation. Result: In SEM study, the surface of crystallized HA pellet was more regular than HA pellet. MTT assay showed that the proliferation of osteoblasts increased in a collagen dose - dependent and time - dependent manner and had a maximum effect at 1% collagen concentration. ALP activity also increased in a collagen dose - dependent manner and had a highest effect at 1% collagen concentration. Conclusion: These data showed that crystallization and collagen coating of HA was effective for osteoblast proliferation and ALP activity. Therefore, our results suggest that crystallized - HA scaffold with collagen coating is may be a good strategy for tissue engineering application for bone formation.
액상화 현상이란 지반이 포화된 느슨한 사질토 지반에 지진과 같은 동적하중이 급속히 작용할 때 과잉간극수압이 발생하고, 지반이 유효응력을 상실하고 액체화 되는 현상을 말한다. 액상화 평가를 위한 실내반복시험은 반복삼축압축시험과 반복전단시험을 통하여 확인이 가능하다. 이와 관련하여 본 연구에서는 반복삼축압축시험을 이용한 모래의 상대밀도와 입도분포에 따른 액상화 저항 강도를 확인하고자 하였고, 실험장비의 신뢰도 검증과 결과의 타당성을 확인하고자 기존의 선행연구와 대조하여 비교·분석하였다. 실험결과, 흙의 분류에 상관없이 상대밀도가 증가함에 따라 액상화 저항 강도가 높아짐을 확인하였고, 모래의 입도분포에 따른 액상화 저항강도는 SW에 가까운 SP시료의 액상화 저항강도가 상당히 높게 확인되었다. 또한 세립분 0% 대비 세립분 30%를 분석한 결과, 상대밀도 40~70%까지 증가함에 따라 액상화 저항강도가 5~20% 가까이 감소하였고, 국내 풍화토 지반이 주문진 표준사 대비 액상화 저항 강도가 세립분이 10%일 때는 30% 이상, 세립분이 30%일 때는 50% 이상 낮게 측정되었다.
축산폐수의 효율적 처리와 최적 메탄발생을 위하여 AF 그리고 이단의 ASBF-PR과 ASBF-SP 실험실적 생물반응기를 구성하고 $35^{\circ}C$ 항온조에서 수리학적체류시간 $1{\sim}2$일 그리고 유기물부하 $1.1{\sim}63kg-COD/m^3{\cdot}d$까지 연속 운전하여 처리효율을 비교, 분석하였다. 하수종말처리장의 혐기성 소화조 잉여 슬러지에 의한 혐기성 생물반응기의 식종은 효과적이었으며, 적응 기간은 약 40일 정도가 소요되었다. 생물반응기는 COD 제거율 $66.4{\sim}84.9$% 그리고 바이오 가스 발생량은 제거된 COD 기준 $0.333{\sim}0.796m^3/kg-COD{\cdot}d$. 으로 축산폐수의 처리에 효율적이었으며 유입 COD의 증가와 수리학적체류시간의 감소에 의한 유기물부하 증가의 경우 COD 제거율은 감소하고 바이오가스 발생량은 증가하였다. 높은 유기물부하에서 AF와 ASBF-PR의 처리효율은 비슷하였으며 ASBF-SP보다 우수하였다. 생물반응기에 충진된 미디어의 공극율과 공극의 크기가 비표면적에 비교하여 유기물질 제거능력 향상에 영향을 미치는 것으로 나타났다. 유입수 TKN 농도가 $1,540{\sim}1,870mg/L$ 범위에서 메탄발효 미생물의 활동은 저해영향을 받아 생물반응기의 처리효율과 바이오가스 발생량은 각각 50% 이하로 감소되는 것으로 나타났으므로 혐기성 소화가 축산폐수의 처리에 주 공정으로 응용된다면 전처리에 의한 TKN의 제거는 필수적이다.
본 연구의 목적은 효소법을 이용한 바이오디젤의 생산에서의 효소(lipase) 활성화를 최적화함에 있다. 효과적인 방법으로 효소를 고정하기 위해 방사선 그라프트 중합법을 이용한 부직포에 음이온 교환기인 ethanolamine과 diethylamine을 도입시켜 음이온 교환 부직포(이때 얻어진 부직포는 EtA, DEA-EtA 부직포라 함)를 합성하였다. 기존에 사용하던 다공성 중공사막의 경우 시간이 지남에 따라 막힘 현상에 따라 유속이 현저하게 줄어드는 점을 보완하고자 기공(pore size)이 $300{\mu}m$인 부직포를 선택하였다. 이 부직포에 음이온 교환기가 도입된 EtA, DEA-EtA 부직포의 최적효소 흡착 특성과 효소 활성도에 대하여 고찰하였다. 그 결과 효소 흡착량은 EtA, DEA-EtA 부직포가 비슷하였으나(EtA non-woven fabric: 15.69 mg/g, DEA-EtA non-woven fabric: 14.45 mg/g) 기름을 투과시킨 결과 효소 활성화는 DEA-EtA 부직포가 EtA 부직포에 비해 현저히 떨어짐(EtA non-woven fabric: $3.50mol/h{\cdot}kg$, DEA-EtA non-woven fabric: $0.38mol/h{\cdot}kg$)을 알 수 있었다. 이 음이온교환기를 이용해 효율적인 바이오디젤 생산을 위한 온도, 효소고정량, 기름과 알코올과의 관계 등의 최적의 조건을 도출하였다.
본 연구에서는 사인파형 투과유속 운전방식을 중공사형 분리막에 적용하여 운전시간에 따른 막간차압(TMP)을 측정하였다. 유효 막면적이 $100cm^2$이고 공칭 세공크기가 $0.45{\mu}m$인 중공사막 모듈을 MLSS 5,000 mg/L 활성슬러지 용액으로 투과 실험하였다. 연속적인 단계별 투과유속 변화법으로 임계 투과유속을 측정하였으며 그 값은 $26.6L/m^2{\cdot}hr$이었다. 여과운전/정지이완(FR), 정지이완시 역세척(FR/BW) 및 사인파형 투과유속 연속운전(SFCO) 방식에 따른 TMP를 측정하였다. 임계 투과유속보다 낮은 15, 20 및 $25L/m^2{\cdot}hr$에서는 SFCO 운전방식이 FR 및 FR/BW에 비하여 효과적이었다. 그러나 임계 투과유속 이상에서는 FR/BW 운전방식이 SFCO보다 효과적으로 막오염을 제어할 수 있음을 확인하였다.
본 연구는 화학적 전처리 공정이 목질계 바이오매스의 효소 가수분해에 미치는 영향을 구명할 목적으로 이태리포플러 분말을 1% 황산과 수산화나트륨 수용액을 이용하여 각각 $150^{\circ}C$와 $160^{\circ}C$에서 한 시간 동안 전처리를 실시하였다. 전처리된 시료는 건조과정을 거친 시료와 건조과정을 거치치 않은 시료로 각각 구분하여 화학적, 물리적 성상 및 효소 당화 효율에 미치는 영향을 비교, 분석하였다. 황산 전처리에 의한 바이오매스의 분해율은 약 24.5%로 수산화나트륨 전처리에 의한 분해율(18.6%)보다 약 6% 이상 높게 측정되었다. 반면, 탈리그닌화는 수산화나트륨이 우수하여 황산을 이용한 전처리보다 약 2% 가량 높게 나타났다. 결정화도는 미처리 시료와 비교하였을 때 황산과 수산화나트륨으로 전처리한 시료 모두 다소 높은 값을 나타내었는데, 이는 전처리 과정에서 비결정성 셀룰로오스가 결정영역보다 선택적으로 분해됨으로서 나타난 결과로 예측되었다. 주사전자현미경에 의한 표면 미세구조 관찰 결과, 황산, 수산화나트륨 전처리 모두 구성 성분들을 분해함으로써 목질바이오매스의 표면을 미처리 시료보다 거칠게 만들고 부분적인 균열을 발생시키는 것을 확인할 수 있었다. 그러나 황산 전처리-건조 시료에서는 이러한 표면 거칠음이 대조구와 유사하게 다시 변화하였음을 관찰하였다. 시료 표면의 기공분포는 두가지 전처리 과정 모두를 통해 크게 증가하였음을 확인하였다. 그러나 수산화나트륨에 의해 전처리된 시료는 건조과정을 거친 경우에도 기공분포가 점차적으로 증가하는 경향을 보였지만, 황산으로 전처리한 시료는 건조과정을 거치면서 전처리에 의해 증가한 기공 분포가 다시 급격히 감소하여 미처리 시료와 유사한 기공분포를 나타내었다. 황산 전처리 후 건조과정을 거친 시료와 미건조 시료는 효소가수분해에 의한 소화율이 각각 7.0%와 26.9%로 측정된 반면, 수산화나트륨 전처리 후 건조된 시료와 미건조시료는 각각 39.7%와 45.8%로 나타나 알칼리에 의한 전처리가 산 전처리보다 소화율 향상을 위해 더 우수하였으며, 이러한 높은 소화율은 당화 효율에도 커다란 영향을 미치는 것으로 판명되었다. 아울러 전처리된 바이오매스의 건조는 소화율 및 당화 수율에 지대한 영향을 미친다는 것을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.