• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.955-961
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed-loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. But it is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. In this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed Just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3117-3130
• /
• 2016

High peak-to-average power ratio (PAPR) of transmitted signals is a major drawback in Multicarrier modulation (MCM) systems. Companding transform is a well-known method to reduce the PAPR without restrictions on system parameters such as the number of subcarriers, frame format and constellation type. In this paper, a novel adaptive companding scheme, mainly focuses on compressing the large signals into the desirable distribution, is proposed to reduce the PAPR with low implementation complexity. In addition, formulas to calculate its PAPR and bit error rate (BER) performance are also derived. Simulation results confirm that the proposed scheme can achieve an effective tradeoff between PAPR reduction and BER performance by carefully choosing the companding parameter.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.6
• /
• pp.577-584
• /
• 2014

The purpose of this study was to compare understanding of school foodservice management and environmentally friendly agricultural products between urban and rural elementary school children's mothers. Subjects were 400 elementary school parentsliving in Jeonnam. The results are summarized as follows. School foodservice program helped to solve unbalanced diets, develop minds and bodies, and improve eating habits. Mothers showed a higher degree of satisfaction for school foodservice containing environmentally friendly agricultural products. The primary reason for favoring environmentally friendly agricultural products was improvement of health and securing safe foods. The most important parameter of school foodservice management was sanitary control of food materials>sanitary control of foods>sanitary conditions of place for meals>sanitary conditions of cooker>sanitary conditions of tableware. In conclusion, school foodservice should be financially responsible to make policies effective.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.950-957
• /
• 2007

This paper considers acoustic characteristics of silencer within a dry vacuum pump. The main objective is to reduce noise in dry vacuum pump using the new designed silencer. First, SPL and sound intensity are measured for noise source identification and the new model silencer is designed corresponding to noise characteristics. 4-pole parameters are used to predict the transmission loss which is one of the interest characteristics of the new silencer. The calculated transmission loss is then used to change main effective factor and optimal value is selected by using design of experiment. By conducting an experiment, it is proved that the new designed silencer has reduced noise level by 6 dB(A) more than the original one.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.221-224
• /
• 2001

In this paper we propose a shift-invariant uHMT estimation for wavelet-based image denoising. The proposed estimation have just nine meta-parameter (independent of the size of the image and the number of wavelet scales) and requires no kinds of training. Also it solve visual artifacts resulted in the lack of shift-invariance in the DWT. The experimental results show that the proposed estimation is more effective than the other wavelet-based denoising by 0.5-ldB (PSNR) and allows an Ο(nlog n) in terms of performance speed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure non-homogeneous Poisson process models presented and the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.79-84
• /
• 2004

We evaluated the reduction performance of NOx storage catalyst and TWC for lean-burn natural gas engine by the model gas. The method of unsteady state reaction was used to compare with reduction performances of NOx storage catalyst and TWC. It was found that the effective parameter was rich spike duration, temperature of the model gas. In the presence of $CO_2$ and $H_2O$ in the reaction mixture was decreased the NOx reduction performance.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.4
• /
• pp.295-308
• /
• 2016

We propose a projection-based analysis of a new hybridizable discontinuous Gale-rkin method for second order elliptic equations. The method is more advantageous than the standard HDG method in a sense that the new method has higher-order accuracy and lower computational cost, and is more flexible. Notable distinctions of our new method, when compared to the standard HDG emthod, are that our method uses $L^2$-projection and suitable stabilization parameter depending on a mesh size for superconvergence. We show that the error for the solution of the equation converges with order p + 2 when we only use polynomials of degree p + 1 as a finite element space without postprocessing. After establishing the theory, we carry out numerical tests to demonstrate and ensure that the proposed method is effective and accurate in practice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1679-1691
• /
• 2016

Successive interference cancellation (SIC) is an effective means of multi-packet reception to combat interference at the physical layer. We investigate the joint optimization issue of channel access and power control for capacity maximization in SIC-enabled wireless networks. We propose a new interference model to characterize the sequential detection nature of SIC. Afterward, we formulize the joint optimization problem, prove it to be a nondeterministic polynomial-time-hard problem, and propose a novel approximation approach based on the genetic algorithm (GA). Finally, we discuss the design and parameter setting of the GA approach and validate its performance through extensive simulations.