• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.5 s.311
• /
• pp.30-36
• /
• 2006

In this paper, a new type of written image segmentation based on relative comparison of region areas is proposed. The original image is composed of two distinctive regions; information and background. Compared with this binary original image, the observed one is the gray scale which is represented with complex regions with speckles and noise due to degradation or contamination. For applying threshold or statistical approach, there occurs the region-deformation problem in the process of binarization. At first step, the efficient iterated conditional mode (ICM) which takes the lozenge type block is used for regions formation into the binary image. Secondly the information region is estimated through selecting action and restored its primary state. Not only decision of the attachment to a region but also the calculation of the magnitude of its area are carried on at each current pixel iteratively. All region areas are sorted into a set and selected through the decision parameter which is obtained statistically. Our experiments show that these approaches are effective on ink-rubbed copy image (拓本 'Takbon') and efficient at shape restoration. Experiments on gray scale image show promising shape extraction results, comparing with the threshold-segmentation and conventional ICM method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.24-36
• /
• 2003

Many rainfall-runoff model, which is applied discharge calculation for effective water-resource planning and management needs topographic and parameter of basin character. But it is very difficult to apply real a phase. Accordingly in this study filling up these problems. Applying GIS(geographic information system) through environment creating input data or concerning with GIS and rainfall runoff model. We built environment that analyze hydrograph showing discharge variation by time. GIS software for constructing input data is used by ArcView. For analysis of hydrograph in Basin, TOPMODEL applied topographic index. Besides for estimate of appliance to rainfall-runoff model, simple storm event and complex storm event are applied rainfall data which was before.

• The Korean Journal of Malacology
• /
• v.21 no.1
• /
• pp.33-40
• /
• 2005

Occurrence and prevalence of Marteilioides chungmueasis have been reported in several waters around Tongyeong but no report has been made for Pukman bay. Therefore, we investigated that the prevalence and infection intensities in Pukman Bay at the inside and the outside areas which are hydrographically divided by tidal current. Furthermore, various environmental parameters were investigated in order to elucidate effective parameter for parasitic infection. Infection rates of Marteilioides chungmuensis in adult oysters were ranged 3.3-20.0% at the inside area during September 2002 through January 2003, and 3.3-30.9% at the outside area during August 2002 through January 2003. External manifestation of infected oyster consisted of abnormal egg masses with nodular appearance in the soft tissue. Histopathological symptoms included massive hemocytic infiltration within or around the follicle wall and atrophic epithelium of digestive diverticula. For the environmental parameters, comparative study made differences between two side of the Bay during the infection period: inside > outside for SS while inside < outside for chlorophyll-a. A positive relationship was observed between chlorophyll-a and infection period, which might indicate the difference in food availability between two areas. The prevalence of ovarian parasite Marteilioides chungmuensis, therefore, was highly associated with food availability. Pearson's correlation analysis was made between environmental parameters and infection prevalence. Significance was observed in water temperature (p < 0.05), suspended solids (p < 0.01) and chlorophyll-a (p < 0.05). A principle component analysis showed that infection of the ovarian parasite, Marteilioides chungmuensis, exhibited effects of seasonality (component I = 55.2%) and chemical/physical environmental factors (component II = 24.4%). These results clearly indicate that the infection of ovarian parasite, M. chungmuensis in the Pacific oyster Crassostrea gigas is closely associated with seasonality and food availability.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.150-156
• /
• 2004

Though the concept of Life-Cycle Cost (LCC) itself is not new, its effectiveness for planning, design, rehabilitation and maintenance/management of civil infrastructures is becoming increasingly recognized. For the decision problems as in the case of the LCC of plant facilities, equipments, bridge decks, pavements, etc., the Life-Cycle Cost Analysis (LCCA) is relatively simple, and thus its practical implementation is rather straightforward. However, when it comes to major infrastructures such as bridge, tunnels, underground facilities, etc., the LCCA problem becomes extremely complex because lack of cost data associated with various direct and indirect losses, and the absence of uncertainty data available for the assessment as well. As a result, the LCC studies have been largely limited only to those relatively simple LCCA problems of planning or conceptual design for making decisions. Accordingly, in the recent years, the researchers have pursued extensive studies on the LCC effectiveness mostly related to LCC models and frameworks for civil infrastructures. Moreover, recently the demand on the practical application of LCC effective decisions in design and maintenance is rapidly growing unprecedently in civil engineering practice. Indirction cost is very important on LCC formulation. But that is very difficult and complicate the estimation every LCC. The objective of this paper is to suggest efficient regression model for the estimation of indirect cost approach to the practical application of LCC for the design and rehabilitation of civil. infrastructures considering traffic, traffic network, detour condition, and workzone condition. In this paper, it performed the sensitivity analysis and correlation analysis of parameter for development of regression model of inflection cost.

• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.507-521
• /
• 1997

The ultimate behavior of a reinforced concrete hyperbolic paraboloid saddle shell under uniformly distributed vertical load is investigated using an inelastic, large displacement finite-element program originally developed at North Carolina State University. Unlike with the author's previous study which shows that the saddle shell possesses a tremendous capacity to redistribute the stresses, introducing tension stiffening in the model the cracks developed are no longer through cracks and formed as primarily bending cracks. Even though with small tension stiffening effect, the behavior of the shell is changed markedly from the one without tension stiffening effect. The load-deflection curves are straight and the slope of the curves is quite steep and remains unchanged with varying the tension stiffening parameters. The failure of the shell took place quite suddenly in a cantilever mode initiated by a formation of yield lines in a direction parallel to the support-to-support diagonal. The higher the tension stiffening parameters the higher is the ultimate load. The present study shows that the ultimate behavior of the shell primarily depends on the concrete tensile characteristics, such as tensile strength (before cracking) and the effective tension stiffening (after cracking). As the concrete characteristics would vary over the life of the shell, a degree of uncertainty is involved in deciding a specified ultimate strength of the saddle shell studied. By the present study, however, the overload factors based on ACI 318-95 are larger than unity for all the cases studied except that the tension stiffening parameter is weak by 3 with and without the large displacement effect, which shows that the Lin-Scordelis saddle shell studied here is at least safe.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1297-1303
• /
• 2020

In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La₂O₃ additive were synthesized using the technique of melt quenching. According to the results, the increase of the La₂O₃ additive increases the density of the glass samples and the mass attenuation coefficient (μ_m) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Z_eff) is also enhanced with an increment of both mass removal cross section for neutron (Σ_R) and absorption neutron scattering cross section (σ_abs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La₂O₃ causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La₂O₃.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.86-92
• /
• 2006

The full-waveform inversion algorithm using normalised seismic wavefields can avoid potential inversion errors due to source estimation required in conventional full-waveform inversion methods. In this paper, we have modified the inversion scheme to install a weighted smoothness constraint for better resolution, and to implement a staged approach using normalised wavefields in order of increasing frequency instead of inverting all frequency components simultaneously. The newly developed scheme is verified by using a simple two-dimensional fault model. One of the most significant improvements is based on introducing weights in model parameters, which can be derived from integrated sensitivities. The model-parameter weighting matrix is effective in selectively relaxing the smoothness constraint and in reducing artefacts in the reconstructed image. Simultaneous multiple-frequency inversion can almost be replicated by multiple single-frequency inversions. In particular, consecutively ordered single-frequency inversion, in which lower frequencies are used first, is useful for computation efficiency.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.121-124
• /
• 2008

The purpose of this study is to evaluate the critical strengthening ratio of concrete railroad bridge strengthened with NSM using CFRP plate. The railroad bridge is usually under vibration and impact in service state. Therefore, it is important that the effective strengthening performance must be exhibited under the service loading is acted. To widely apply the NSM method for the concrete railroad bridge in field, it needs that reasonable strengthening parameter such as strengthening ratio has to be investigated and evaluated when the strengthening design is conducted. In this study, to suggest more reasonable strengthening ratio, material and geometrical uncertainty was considered and applied by Monte Carlo Simulation (MSC) technique. Lastly, the critical strengthening ratio of concrete railroad bridge strengthened with NSM using CFRP plate was evaluated by using the limit state function with the target reliability index.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.249-255
• /
• 2020

This study developed the health monitoring method of press process using the acoustic emission (AE) sensor and high-pass filter. Also, the AE parameters such as ring-down count and peak amplitude are used. Based on this AE signal, the AE parameters were acquired and was utilized to detect the crack of the specimen. Since the defect detection is difficult due to noise and low magnitude of signal, the signal noise and press operation frequency were checked through the Short Time Fourier Transform(STFT) and damped. High-pass Filtering data was applied to AE parameters to select effective parameters. By using this signal processing techniques, the proposed AE parameters could improve the performance of defect detection in the press process.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.734-745
• /
• 2016

This review article described the electrochemical Frumkin, Langmuir, and Temkin adsorption isotherms of over-potentially deposited hydrogen (OPD H) and deuterium (OPD D) for the cathodic $H_2$ and $D_2$ evolution reactions (HER, DER) at Pt, Ir, Pt-Ir alloy, Pd, Au, and Re/normal ($H_2O$) and heavy water ($D_2O$) solution interfaces. The Frumkin, Langmuir, and Temkin adsorption isotherms of intermediates (OPD H, OPD D, etc.) for sequential reactions (HER, DER, etc.) at electrode/solution interfaces are determined using the phase-shift method and correlation constants, which have been suggested and developed by Chun et al. The basic procedure of the phase-shift method, the Frumkin, Langmuir, and Temkin adsorption isotherms of OPD H and OPD D and related electrode kinetic and thermodynamic parameters, i.e., the fractional surface coverage ($0{\leq}{\theta}{\leq}1$) vs. potential (E) behavior (${\theta}$ vs. E), equilibrium constant (K), interaction parameter (g), standard Gibbs energy (${\Delta}G_{\theta}{^{\circ}}$) of adsorption, and rate (r) of change of ${\Delta}G_{\theta}{^{\circ}}$ with ${\theta}$ ($0{\leq}{\theta}{\leq}1$), at the interfaces are briefly interpreted and summarized. The phase-shift method and correlation constants are useful and effective techniques to determine the Frumkin, Langmuir, and Temkin adsorption isotherms and related electrode kinetic and thermodynamic parameters (${\theta}$ vs. E, K, g, ${\Delta}G_{\theta}{^{\circ}}$, r) at electrode/solution interfaces.