• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.3-17
• /
• 2003

This paper deals with the problems and their possible solutions in the development of finite element for analysis of shell. Based on these solution schemes, a series of flat shell elements are established which show no signs of membrane locking and other defects even though the coarse meshes are used. In the element formulation, non-conforming displacement modes are extensively used for improvement of element behaviors. A number of numerical tests are performed to prove the validity of the solutions to the problems involved in establishing a series of high performance flat shell elements. The test results reveal among others that the high accuracy and fast convergence characteristics of the elements are obtainable by the use of various non-conforming modes and that the ‘Direct Modification Method’ is a very useful tool for non-conforming elements to pass the patch tests. Furthermore, hierarchical and higher order non-conforming modes are proved to be very efficient not only to make an element insensitive to the mesh distortion but also to remove the membrane locking. Some numerical examples are solved to demonstrate the validity and applicability of the presented elements to practical engineering shell problems.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.13 no.1
• /
• pp.82-89
• /
• 2007

Purpose: The purpose of this study was to develop and evaluate an e-Learning Program designed to enhance novice nurses's performance ability Method: The e-Learning program was designed for novice nurses before beginning to work in a hospital using a KMS(Knowledge Management System). This study was carried out from February 2006 to April 2007. The program had progressive steps including design, pilot test & modification, contents development, program application and evaluation. After the program design and pilot testing, the learner's satisfaction was analyzed. Result: The program site is http://kms.emc.ac.kr titled, 'Cyber Education Center'. The sixteen part course has been developed as follows: blood sugar test, skin test, insulin test 1, insulin test 2, blood culture, blood sampling, heat therapy, cold therapy, glycerin enema, preparation of operation, oxygen therapy, suction technique, transfusion, foley catheterization and aseptic technique. The overall learner's satisfaction score was 4.08 out of 5 points. Conclusion: E-Learning could be useful for education and nursing work. This method may be effective for clinical nurses.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.1020-1025
• /
• 2012

In this study, we fabricated the superhydrophobic and super-water-repellent surface with the micro/nano scale structures using simple conventional silicon wet-etching technique and the black silicon method by deep reactive ion etching. These fabrication methods are simple but very effective. Also we reported the droplet impact experimental results on the micro/nano-scaled surface. There are two representative impact behaviors as "rebound" and "fragmentation". We found the transition Weber number between "rebound" and "fragmentation" statements, experimentally. Additionally, we concerned about the dimensionless spreading diameters for our super-water-repellent surface. The novel characterization method was introduced for analysis including the "fragmentation" region. As a result, our super-water-repellent surface with the micro/nano-scaled structures shows the different impact behaviors compared with a reference smooth surface, by some meaningful experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1005-1011
• /
• 2004

Squeeze film dampers (SFDs) have been commonly used to effectively enhance the dynamic behavior of the rotating shaft supported by rolling element bearings. However, due to the recent trends of high operating speed, high load capacity and light weight in rotating machinery, it is becoming increasingly important to change the dynamic characteristics of rotating machines in operation so that the excessive vibrations, which may occur particularly when passing through critical speeds or unstable regions, can be avoided. Semi-active type SFDs using magneto-rheological fluid (MR fluid), which responds to an applied magnetic field with a change in rheoloaical behavior, are introduced in order to find its applications to rotating machinery as an effective device attenuating unbalance responses. In this paper, a semi-active SFD using MR fluid is designed, tested and identified by means of linear analysis to investigate the capability of changing its dynamic properties such as damping and stiffness. Furthermore, the proposed device is applied to a rotor system to investigate its potential capability for vibration attenuation: an efficient method for selecting the optimal location of the proposed damper is introduced and control algorithm that could improve the unbalance response properties of a flexible rotor is also proposed.

• Membrane and Water Treatment
• /
• v.10 no.6
• /
• pp.461-469
• /
• 2019

In the present work, we present a new effective hydrophilicity modifier for polysulfone (PSf) membrane. Firstly, amphiphilic nanocellulose (ANC) with different substitution degrees (SD) was synthesized by esterification reaction with nanocellulose (NC) and dodecyl succinic anhydride (DDSA). The SD and morphology of ANC were characterized by titration method and transmission electron microscopy (TEM). Then, the polysulfone (PSf)/ANC blend membranes were prepared via an immersion phase inversion method. The influence of SD on the morphology, structure and performances of PSf/ANC blend membrane were carefully investigated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), mechanical property test, contact angle measuring instrument and filtration experiment. The results showed that the mechanical property, hydrophilicity and anti-fouling property of all the PSf/ANC blend membranes were higher than those of pure PSf membrane and PSf/NC membrane, and the membrane properties were increased with the increasing of SD values. As ANC-4 has the highest SD value, PSf/ANC-4 membrane exhibited the optimal membrane properties. In conclusion, the prepared ANC can be used as an additive to improve the hydrophilicity and anti-fouling properties of polysulfone (PSf) membrane.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.3-10
• /
• 2007

As information communication technology matures, GIS is being evolved from wire communication GIS to mobile GIS. This is due that mobile GIS satisfy mobility, field work, speed and time. Also, this is proper that mobile GIS accomplish investigation, confirmation, input and modification operations of spatial and attribute data at field. I think mobile GIS's use is the best way. Because, Mobile GIS's use can accomplish effectively the management of various kinds facilities in city. On this study, we consider diversified methods a person in charge can management point and line data with more easy and more effective method. The management methods of pint type data are free method, offset method two point method. The management methods of line type data are free method, point connection method, point and line connection method and the minimum distance connection method between point and line.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.67-81
• /
• 1996

Our agricultural extension system with all its success and failures, rewards and punishment was introduced 50 years ago with particular reference from United States. Some of the established principles and policies of effective extension work were shaken off for immediate result. But the results were not praiseworthy. The purpose of this study is to throw some light on the question of systems and approaches on agricultural extension that can adequately meet the challenges of the future. Our extension system is `special government type` which administers a nation-wide network of extension and training services in close collaboration with that of the experiment station. This type, however, has innate weakness which inclined to be standardized, inflexible, and irrelevant to actual needs of farming communities and problems of farmers. In this regard, it is necessary to consider another approaches of agricultural extension: `Government Type`, `Agricultural University`, `Farmers Organization`. The characteristics features, advantages and disadvantages of these models have been discussed. Each model has been found wanting in one way or another to meet the needs and interest of the present Korean situation. In view of the agricultural situation, and considering the expected changes of farmers and technologies in the years ahead, the `modification (especially to the direction of provincial government) of preset system` was expected which would be operationally flexible and organizationally unified and decentralized. The modification of present system should include the following characteristics: 1) universal contact with client system, 2) local planning based on the needs of clients, 3) using multiple method of nonformal education, 4) fitting with both general and specialized farming systems, 5) accommodating variable clients, technologies and educational objects.

• Structural Engineering and Mechanics
• /
• v.83 no.5
• /
• pp.693-707
• /
• 2022

Bonded joints have proven their performance against conventional joining processes such as welding, riveting and bolting. The single-lap joint is the most widely used to characterize adhesive joints in tensile-shear loadings. However, the high stress concentrations in the adhesive joint due to the non-linearity of the applied loads generate a bending moment in the joint, resulting in high stresses at the adhesive edges. Geometric optimization of the bonded joint to reduce this high stress concentration prompted various researchers to perform geometric modifications of the adhesive and adherends at their free edges. Modifying both edges of the adhesive (spew) and the adherends (bevel) has proven to be an effective solution to reduce stresses at both edges and improve stress transfer at the inner part of the adhesive layer. The majority of research aimed at improving the geometry of the plate and adhesive edges has not considered the effect of temperature and water absorption in evaluating the strength of the joint. The objective of this work is to analyze, by the finite element method, the stress distribution in an adhesive joint between two 2024-T3 aluminum plates. The effects of the adhesive fillet and adherend bevel on the bonded joint stresses were taken into account. On the other hand, degradation of the mechanical properties of the adhesive following its exposure to moisture and temperature was found. The results clearly showed that the modification of the edges of the adhesive and of the bonding agent have an important role in the durability of the bond. Although the modification of the adhesive and bonding edges significantly improves the joint strength, the simultaneous exposure of the joint to temperature and moisture generates high stress concentrations in the adhesive joint that, in most cases, can easily reach the failure point of the material even at low applied stresses.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.349-366
• /
• 1994

The method of treatment in skeletal Class III malocclusion must be chosen according to an etiology and timing of the treatment. Maxillry protraction has been used as an effective treatment method in growing children with maxillary deficiency. The efficacy of maxillary protraction has been viewed as a result of downward-backward displacement of mandible and compensatory dental displacement during the treatment rather than forward -downward growth of maxilla itself. In this study, 104 subjects treated with maxllary protraction, and 19 males and 21 females with known annual growth amount have been chosen longitudinally as treated group and normal group, respectively. And changes in position of maxilla, mandible and dentition have been comparatively analyzed on the lateral cephalometric radiographs by age. The results were as follows : 1. Treated group showed more forward movement of maxilla compare to the normal group and the mandible displaced backward compare to the normal group. 2. Downward movement of maxilla in treated group was similar to that of normal group with statistical signigicance in female 12 year old group and downward movement of mandible in treated group was similar to that of normal group. 3. In treated group, maxillary central incisor moved more forward than the normal group with statistical significance in male 8, 10 year-old groups and female 8, 9, 10 year-old groups. In treated group, downward movement of maxillary central incisor was similar to that of the normal group with statistical significance in male and female 7,8 year-old groups. Considering the above results and the duration of the treatment, the forward movement of maxilla due to maxillary protraction was effective compared to normal growth amount of the normal group.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.111-120
• /
• 2005

A cost effective three-dimensional color gamut mapping architecture is described. The conventional three-dimensional reduced resolution look-up table is considered and the concept of three-dimensional reduced resolution difference look-up table is introduced for cost effective and real-time color gamut mapping. The overall architecture uses one-dimensional memory decomposition of three-dimensional gamut mapping look-up table, three-dimensional interpolation and simple addition operation for generating the final gamut mapped colors. The required computational cost is greatly reduced by look-up table resolution adjustment and further reduced by the gamut mapping rule modification. The proposed architecture greatly reduces the required memory size and hardware complexity compared to the conventional method and it is suitable for real-time applications. The proposed hardware is suitable for FPGA and ASIC implementation and could be applied to the real-time display quality enhancement purposes.