• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.447-456
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.1
• /
• pp.99-107
• /
• 1992

Effects of the indigenous Vesicular-arbuscular mycurrhizal fungi(VAMF) on early growth response of greenhouse grown crops were experimented. This study was done to evaluate the benefit of indigenous VAMF inoculation on the early growth and the subsequent growth after transplanting of some crops such as cucumber, tomato, hot pepper, eggplant, and melon. Leaf area, shoot dry weight, and plant length of mycorrhizal greenhouse crops showed the tendency of significant or no significant increase over control plants receiving no inoculation. The levels of VA mycorrhizal colonization were increased with plant growth, and infection rates of horticultural crop except hot pepper around one week after transplanting were decreased, while that of 8 weeks after emergence of mycorrhizal seedlings were increased again and infected by around 50% at harvesting time. In spore densities in the rhizosphere soil of craps experimented, the number of spore ranged from $72.7{\pm}26.3$ to $100{\pm}10.3g^1$ on dried soil basis and high density showed in both cucumber and tomato. Total nitrogen contents in shoots were lower in the mycorrhizal plants than non-mycorrhizal one, whereas P uptake in mycorrhizal hot pepper and tomato were highly ramarkable. The K contents in the shoots of mycorrhizal cucumber and eggplent were highly enhanced. Inoculation of the indigenous VAMF enhanced shoot Ca and Mg in both tomoto and melon. The contents of Fe, Zn, Mn and Cu in shoots of mycorrhizal crops were higher than non-mycorrhizal plants and vice versa in case of eggplent. Inoculation of the indigenous VAMF to horticultural crops were effective for alleviation of transplanting shock, and pretransplanting infection improved subsequent growth by reducing the time required for establishment of a functional mycorrhizal symbiosis following transplanting.

• Physical Therapy Korea
• /
• v.9 no.1
• /
• pp.81-96
• /
• 2002

The purpose of this research was to determine the effects on the healing of fibular fractures in rabbits of low-intensity pulsed ultrasound (50 $mW/cm^2$ and 500 $mW/cm^2$) applied for periods of 4, 14 and 24 days following fibular osteotomy. Thirty-six male Japanese white rabbits were randomly divided into three groups of twelve for three treatment protocols: (1) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 4th day following fibular osteotomy, (2) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 14th day following fibular osteotomy, and (3) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 24th day following fibular osteotomy. The low-intensity pulsed ultrasound was applied to only one fibula of each rabbit (these served as the experimental group). The other fibula of each rabbit served as the control group. The selection of which fibula was to be treated was made randomly. The animals were sacrificed on the 4th, 14th and 24th day after the start of ultrasound treatments. Percent of trabecular bone area and fibular radiography were carried out to compare the degree of fibular bone healing. A microscope was also used to determine any histologic changes. For statistical differences in radiological changes due to length of treatment period (4, 14 and 24 days respectively), the Wilcoxon signed-ranks test was used to compare the experimental and control groups. For statistical differences in fracture healing due to differences in ultrasound intensity, radiological studies were compared using the Mann-Whitney Test. And, to compute percentage differences in areas of trabecular bone, Two-way analysis of variance (ultrasound intensity x each group) was used. Experiment results were as follows: 1. In animals sacrificed on the 4th day, no difference was found in the radiological studies of the fibulae in the experimental and control groups (p>.05). However, experimental groups showed more rapid bone repair than control group. 2. Both radiographic and percent of trabecular bone area studies showed significant differences in rabbits sacrificed after 14 days. Fracture healing was significantly increased in the experimental group (p<.05) 3. In the animals sacrificed on the 24th day, histologic study showed rapid bone repair but fibular radiologic studies did not show statistical differences between the two groups (p>.05). 4. On the 14th day, bone union on radiograph was significantly more rapid in the treatment group with pulsed ultrasound of 50 $mW/cm^2$ than the group with 500 $mW/cm^2$ (p<.05). Histologic studies showed that both the 14 and 24 days groups had more rapid bone repair in animals treated with 50 $mW/cm^2$ ultrasound intensity than those treated with 500 $mW/cm^2$ intensity. In conclusion, it has been shown that the low-intensity pulsed ultrasound has a positive effect on bone fracture healing in the early stage and the range of pulse ultrasound from 50 $mW/cm^2$ to 500 $mW/cm^2$ is effective for fracture healing. Further study is needed to investigate the influence of pulsed ultrasound on delayed union and non-union in bone fractures and also for the clinical use of low-intensity pulsed ultrasound for bone healing in humans.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.57-76
• /
• 2017

Recently, consumer needs are diversifying as information technologies are evolving rapidly. A lot of IT devices such as smart phones and tablet PCs are launching following the trend of information technology. While IT devices focused on the technical advance and improvement a few years ago, the situation is changed now. There is no difference in functional aspects, so companies are trying to differentiate IT devices in terms of appearance design. Consumers also consider design as being a more important factor in the decision-making of smart phones. Smart phones have become a fashion items, revealing consumers' own characteristics and personality. As the design and appearance of the smartphone become important things, it is necessary to examine consumer values from the design and appearance of IT devices. Furthermore, it is crucial to clarify the mechanisms of consumers' design evaluation and develop the design evaluation model based on the mechanism. Since the influence of design gets continuously strong, various and many studies related to design were carried out. These studies can classify three main streams. The first stream focuses on the role of design from the perspective of marketing and communication. The second one is the studies to find out an effective and appealing design from the perspective of industrial design. The last one is to examine the consumer values created by a product design, which means consumers' perception or feeling when they look and feel it. These numerous studies somewhat have dealt with consumer values, but they do not include product attributes, or do not cover the whole process and mechanism from product attributes to consumer values. In this study, we try to develop the holistic design evaluation model based on consumer values based on three-step approach from product attributes, perceived attributes, to consumer values. Product attributes means the real and physical characteristics each smart phone has. They consist of bezel, length, width, thickness, weight and curvature. Perceived attributes are derived from consumers' perception on product attributes. We consider perceived size of device, perceived size of display, perceived thickness, perceived weight, perceived bezel (top - bottom / left - right side), perceived curvature of edge, perceived curvature of back side, gap of each part, perceived gloss and perceived screen ratio. They are factorized into six clusters named as 'Size,' 'Slimness,' 'No-Frame,' 'Roundness,' 'Screen Ratio,' and 'Looseness.' We conducted qualitative research to find out consumer values, which are categorized into two: look and feel values. We identified the values named as 'Silhouette,' 'Neatness,' 'Attractiveness,' 'Polishing,' 'Innovativeness,' 'Professionalism,' 'Intellectualness,' 'Individuality,' and 'Distinctiveness' in terms of look values. Also, we identifies 'Stability,' 'Comfortableness,' 'Grip,' 'Solidity,' 'Non-fragility,' and 'Smoothness' in terms of feel values. They are factorized into five key values: 'Sleek Value,' 'Professional Value,' 'Unique Value,' 'Comfortable Value,' and 'Solid Value.' Finally, we developed the holistic design evaluation model by analyzing each relationship from product attributes, perceived attributes, to consumer values. This study has several theoretical and practical contributions. First, we found consumer values in terms of design evaluation and implicit chain relationship from the objective and physical characteristics to the subjective and mental evaluation. That is, the model explains the mechanism of design evaluation in consumer minds. Second, we suggest a general design evaluation process from product attributes, perceived attributes to consumer values. It is an adaptable methodology not only smart phone but also other IT products. Practically, this model can support the decision-making when companies initiative new product development. It can help product designers focus on their capacities with limited resources. Moreover, if its model combined with machine learning collecting consumers' purchasing data, most preferred values, sales data, etc., it will be able to evolve intelligent design decision support system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.206-216
• /
• 1988

In order to set up a predictive model for effective spat collection of pen shell, Atrina (Servatrina) pectinata, the survival rate and time required at each developmental stage of drifting larvae were surveyed during the period from June 8 to October 16 in 1986 at the Yongku inlet Chilchon Is., Chinhae Bay, the southern part of Korea. And also the experiments of spat collection were carried out In Yongku inlet during the period from July 6 to November 23 in 1987 and In Yoja Bay during the period from July 9 in 1987 to February 15 in 1588. The advent of D-shape larvae ca. $135\times144um $ long had three peaks in that area: August 1, 12 and 25. Umbo shape larvae ca. $300\times317um$ and full grown larvae ca. $455\times450um$ long also sowed three peaks: August 9, August 22 and September 4 for the former, and August 23, September 3 and September 16 for the latter. Nine to ten days was required for D-shape larvae to develop to umbo shape larvae. The instantaneous survival rate was 0.94 with a total survival rate if $54\%$ at this intermorphological stage. The required time of umbo to full grown larvae varied from twelve to fourteen days with a instantaneous survival rate of 0.88 and total survival rate of $19\%$. Twenty-two to twenty-three days was required for each group of the D-shape larvae to reach a fullgrown stage, and their total survival rate was $10\%$ during this developmental period. The number of the spat attached to the spat collector is 0.16 inds. per $m^2$ vertical spat collector in Yongku inlet and 0.48 inds. per $m^2$ horizontal spat collector in Yoja Bay. The average shell length of spat attached was $0.51({\pm}0.15)\;mm$ on September $27,\;38.52({\pm}6.98)\;mm$ on November 21 in 1987 and $49.00({\pm}10.77)mm$ on February 15 in 1988.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.35-42
• /
• 2019

Organic fertilization (OF) was an effective management strategy to improve crop yield and soil fertility. Determination of optimum application rate has been received great interest as a major research field. In this study, we evaluated optimum application level of three different organic fertilizers; mixed expeller compost (MEC), mixed organic fertilizer (MOF) and organic complex fertilizer (OCF), for garlic cultivation. Treatments consisted of MEC, MOF, OCF (50, 100, 150% of standard nitrogen input), inorganic fertilizer(NPK, N-P₂O₅-K₂O : 250-78-128 kg ha^-1) and no-fertilization (control). Overall, the yields of garlic under MEC, MOF and OCF 100% (5,337, 5,617 and 5,276 kg ha^-1) were higher than under control (4,496 kg ha^-1). The 100% of three OFs treatements showed the highest yield and bulb diameter, similar with NPK, while leaf length and bulb height were not significantly different among all treatments. The 150% of three OFs rather decreased yield. The highest nitrogen use efficiency (38.4 and 38.0%) was observed in MOF 100% and OCF100%, which was the most similar with that in NPK (38.8%). As OF application rate increased, pH was decreased, but soil NO₃-N and NH₄-N were increased. There was no significant difference in soil organic matter (OM), av. P₂O₅ and Ex. cation values. From these results, 100% application of OFs could be recommended as a suitable input level for garlic cultivation, regardless of organic fertilizer types. Further study might be required to evaluate long-term OF application effect on soil health and crop productivity.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.89-95
• /
• 2006

The purpose of this study was to evaluate the radiation doses during CT transmission scan by changing tube voltage and tube current, and to estimate the radiation dose during our clinical whole body $^{137}Cs$ transmission scan and high quality CT scan. Radiation doses were evaluated for Philips GEMINI 16 slices PET/CT system. Radiation dose was measured with standard CTDI head and body phantoms in a variety of CT tube voltage and tube current. A pencil ionization chamber with an active length of 100 mm and electrometer were used for radiation dose measurement. The measurement is carried out at the free-in-air, at the center, and at the periphery. The averaged absorbed dose was calculated by the weighted CTDI ($CTDI_w=1/3CTDI_{100,c}+2/3CTDI_{100,p}$) and then equivalent dose were calculated with $CTDI_w$. Specific organ dose was measured with our clinical whole body $^{137}Cs$ transmission scan and high quality CT scan using Alderson phantom and TLDs. The TLDs used for measurements were selected for an accuracy of ${\pm}5%$ and calibrated in 10 MeV X-ray radiation field. The organ or tissue was selected by the recommendations of ICRP 60. The radiation dose during CT scan is affected by the tube voltage and the tube current. The effective dose for $^{137}Cs$ transmission scan and high qualify CT scan are 0.14 mSv and 29.49 mSv, respectively. Radiation dose during transmission scan in the PET/CT system can measure using CTDI phantom with ionization chamber and anthropomorphic phantom with TLDs. further study need to be peformed to find optimal PET/CT acquisition protocols for reducing the patient exposure with same image qualify.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.105-113
• /
• 2006

This study peformed to confirm the corrected dose In different electron density materials using the superposition/FFT convolution method in radiotherapy Planning system. The experiments of the $K_2HPO_4$ diluted solution for bone substitute, Cork for lung and n-Glucose for soft tissue are very close to effective atomic number of tissue materials. The image data acquisited from the 110 KVp and 130 KVp CT scanner (Siemes, Singo emotions). The electron density was derived from the CT number (H) and adapted to planning system (Xio, CMS) for heterogeneity correction. The heterogeneity tissue phantom used for measurement dose comparison to that of delivered computer planning system. In the results, this investigations showed the CT number is highly affected in photoelectric effect in high Z materials. The electron density in a given energy spectrum showed the relation of first order as a function of H in soft tissue and bone materials, respectively. In our experiments, the ratio of electron density as a function of H was obtained the 0.001026H+1.00 in soft tissue and 0.000304H+1.07 for bone at 130 KVp spectrum and showed 0.000274H+1.10 for bone tissue in low 110 KVp. This experiments of electron density calibrations from CT number used to decide depth and length of photon transportation. The Computed superposition and FFT convolution dose showed very close to measurements within 1.0% discrepancy in homogeneous phantom for 6 and 15 MV X rays, but it showed -5.0% large discrepancy in FFT convolution for bone tissue correction of 6 MV X rays. In this experiments, the evaluated doses showed acceptable discrepancy within -1.2% of average for lung and -2.9% for bone equivalent materials with superposition method in 6 MV X rays. However the FFT convolution method showed more a large discrepancy than superposition in the low electron density medium in 6 and 15 MV X rays. As the CT number depends on energy spectrum of X rays, it should be confirm gradient of function of CT number-electron density regularly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.34-44
• /
• 1989

The stability of rice cultivation in Korea is largely depended on climatic conditions, especially, low temperature at the period of early growth stage and after heading. The improvement of cold tolerant varieties and appropriate cultural practices in rice are very effective to minimize the cold damage. This paper is summarized the mechanism and counterplans of cold injury of rice plants. The paddy area having commonly cold injury in Korea is approximately 15, 522ha in 1,709 sites on the national scale. The cold damage at seedling stage in nursery bed appeared to poor germination, leaf discoloration, dead seedlings and seedling rot ect.. At the vegetative stage, the decreased tiller number due to poor rooting and the delayed heading caused by slow growth and panicle differentiation are commonly showed. The cold injury at early reproductive stage appeared to the degeneration of spikelets and rachis - branches, while that at meiosis stage showed to increased sterility due to poor development of pollen and shortened panicle length with delaying heading, therefore the grain yield is largely decreased. The cold damage at heading and ripening stages showed to poor pollination and fertilization, low panicle exsertion, poor grain filling and finally grain quality became low. To minimize the cold injury to rice plants by low temperature, following counterplans would be recommonded ; Improvement of the cold toelrant rice varieties for the regions of midmountains and alpines. Raising healthy seedlings at upland nursery beds and by using of growth regulators such as ABA, Fuchiwang and Tachiace. Soil improvement and organic matter application to reduce cold damage by increasing water and fertilizer holding capacities in the paddy field having commonly cold water and in the place where cold damage is regularly occurred. Appropriate fertilization for raising healthy rice plants to tolerate under low temperature condition. Water management to increase water temperature in the paddy such as depth watering, round channels and polyethylene tubes around the field. Establishment of the optimum cultivation time of rice based on minimum, mean and maximum temperatures at different regions with appropriate rice varieties.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.233-242
• /
• 2010

This study was conducted to know that if ionic liquids can be applicable as control agents of harmful algae in water-ecosystem and to find out problems caused by ionic liquid application. Firstly, the differential selectivity of various fresh-water algal species to several 1-alkyl-3-methylimidazolium chloride ionic liquids was investigated. There was a distinct differential response between alkyl chain lengths from butyl to dodecyl and towards the algal organisms : Generally algicidal activity was increased with increase of chain length and among the algae used in this study, Stephanodiscus hantzschii f. tenuis, Oscillatoria tenuis and Spirulina pratensis were most sensitive to 1-dodecyl-3-methylimidazolium chloride (MAIC12), next was Microcystis aeruginosa, and the others were relatively less sensitive to the chemical. The selectivity degree was about ten to twenty times based on the $EC_{80}$ (Effective concentration required for 80% growth inhibition). Secondly, an activity persistence of ionic liquids was investigated in natural mimic condition (using water bottle containing soil-sediments under the greenhouse condition). At the application of $1.0{\mu}g\;mL^{-1}$ of 1-octyl-3-methylimidazolium chloride (MAIC8), the algal growth did not occur at all until 6 days after treatment(DAT) and observed a only little growth at 9 DAT. But the algae grew rapidly after 9 DAT. So at 20 DAT, total chlorophylls was $264.4{\mu}g\;L^{-1}$ and the growth was inhibited by 58.2% compared to untreatment. On the other hand, MAIC12 also had a similar persistence pattern to MAIC8, showing nearly 5 times more activity than MAIC8. At 20 days after $0.2{\mu}g\;mL^{-1}$ application of MAIC12, that is, total chlorophylls was $251.2{\mu}g\;L^{-1}$ and the growth was inhibited by 55.2% compared to untreatment. In summary, 1-alkyl-3-methylimidazolium chloride ionic liquids is likely to be applicable for selective control of harmful algae as potent compounds having long lasting activity. However, the difficulty of degradation seems to be a limiting factor in an eco-friendly application of the compounds.