• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.231-237
• /
• 2006

This paper proposes an effective drive of high intensity discharge (HID) lamp ballast for cars. All control functions of the proposed ballast are implemented using a low-cost single chip microcontroller, PIC16C73 to optimize the total system size and to minimize cost through minimization of total component number. The proposed ballast generates high open-circuit voltage to ignite the lamp and is controlled to supply effectively the power required to shorten warm-up period after the breakdown. The DC-DC converter of the DC-AC converter part of the ballast utilizes the flyback converter topology that can minimize component number. Also, because to more minimize the ballast size, the transformer size must be minimized, for this, PWM (Pulse Width Modulation) pulses are generated with high frequency using the PWM module of the microcontroller. An analysis for this is explained, briefly. As if the operation of the lamp and ballast arrives at steady-state, then the ballast must AC-control the lamp, for this, the microcontroller utilizes the other PWM module. And the part related to the igniter is explained, briefly. It is shown through experimental results that the controller of the proposed ballast has good performance for the HID lamp for cars.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.415.2-415.2
• /
• 2014

Cost-effective, robust devices for solid-state lighting industry that converts electricity to light revolutionize the current lighting industry. Phosphor materials used in these devices should be synthesized in a low-cost and effective method for use in WLEDs. In this presentation, the synthesis of Eu3+ ions doped BaMoO4 phosphor samples by a facile synthesis process for red component of WLEDs will be shown. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by using a field-emission scanning electron microscope and transmission electron microscope. These confirmed the formation of a shuttle like particles with perpendicular protrusions in the middle of the particle. The photoluminescence (PL) properties exhibited good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (~ 280-315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra, indicating the rich red emission. The results suggest that this phosphor is a good material as red region component in the development of tri-band UV excitation based WLEDs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.283-289
• /
• 2014

A Fresnel lens is an optical component which can be used as a cost-effective, lightweight alternative to conventional continuous surface optics. Fresnel lens solar concentrators continue to fulfill a market requirement as a system component in high volume cost effective Concentrating Photovoltaic (CPV) electricity generation. The basic principles of the fresnel lens are reviewed and some practical examples are described. To investigate the performance space of the Fresnel lens, a fast simulation method which is a hybrid between raytracing and analytical computation is employed to generate a cache of simulation data. Injection molders are warming up to the idea of cycling their tool surface temperature during the molding cycle rather than keeping it constant. Heat and cool process are now also finding that raising the mold wall temperature above the resin's glass-transition or crystalline melting temperature during the filling stage and product performance in applications from automotive to packaging to optics. This paper deals with the suitability of Fresnel lenses of imaging and non-imaging designs for solar energy concentration. The concentration fresnel lens confirmed machinability and optical transmittance and roughness measure through manufactured the prototype.

• Journal of KIISE:Software and Applications
• /
• v.31 no.12
• /
• pp.1611-1620
• /
• 2004

MPEG-4 supports dynamic scene composition through add/delete/replace of object or change of object's properties. Other existing MPEG-4 players focus on transmitting and playing the multimedia data according to MPEG-4 standard. It is insufficient for MPEG-4's characteristic such as playback of various objects and playback of dynamic scene composition. In this paper, we propose an effective scene compositor which is the core component of MPEG-4 player The scene compositor is an optimized processor that searches efficiently the scene graph, creates the data structure for independent management of object information and improves processing ability of user interaction. The scene compositor supports sufficiently scene description information, and is managed independently in player for component extension and application of mobile environment.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.11
• /
• pp.1127-1142
• /
• 2011

The aim of this investigation was to select effective Pseudomonas sp. strains that can enhance the productivity of soybean-wheat cropping systems in Vertisols of Central India. Out of 13 strains of Pseudomonas species tested in vitro, only five strains displayed plant growth-promoting (PGP) properties. All the strains significantly increased soil enzyme activities, except acid phosphatase, total system productivity, and nutrient uptake in field evaluation; soil nutrient status was not significantly influenced. Available data indicated that six strains were better than the others. Principal component analysis (PCA) coupled cluster analysis of yield and nutrient data separated these strains into five distinct clusters with only two effective strains, GRP3 and HHRE81 in cluster IV. In spite of single cluster formation by strains GRP3 and HHRE81, they were diverse owing to greater intracluster distance (4.42) between each other. These results suggest that the GRP3 and HHRE81 strains may be used to increase the productivity efficiency of soybean-wheat cropping systems in Vertisols of Central India. Moreover, the PCA coupled cluster analysis tool may help in the selection of other such strains.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2793-2799
• /
• 2013

This paper proposes an effective feature compensation method to improve speech recognition performance in time-varying background noise condition. The proposed method employs principal component analysis to improve the variational model composition method. The proposed method is employed to generate multiple environmental models for the PCGMM-based feature compensation scheme. Experimental results prove that the proposed scheme is more effective at improving speech recognition accuracy in various SNR conditions of background music, compared to the conventional front-end methods. It shows 12.14% of average relative improvement in WER compared to the previous variational model composition method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.579-588
• /
• 2009

Enterprises and governments currently utilize COTS (Commercial off-the-Shelf) based information systems which are a kind of component based systems. Especially, COTS are widely utilized as components of information security systems and information systems. This paper suggests an appropriate adaptation level and a cost effective priority to replace security functional components in security environment. To make a cost effective decision on adapting security functional components, this paper develops a hierarchical model of information security technologies and analyzes findings through multiple decision-making criteria.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.15-22
• /
• 2023

LPG-related accidents, which account for half of all gas accidents in Korea, have not shown any sign of decrease over the past decade, partially owing to the lack of effective safety improvement measures. The purpose of this study was to identify the effectiveness of improvement measures by analyzing the traits of accidents in terms of human factors, and to seek more effective accident prevention strategies. In this study, 108 accident cases were collected and analyzed in the aspect of accident characteristics such as violation type, human factors, and so on. The results showed that the work procedures of suppliers and engineers related to LPG accidents seemed to be similar in outward appearance; however, specific accident causes and unsafe behaviors were different. Particularly, type and target of violations were different, which could be visually confirmed by the Principal Component Analysis (PCA) and the Quantification Techniques (QT). Furthermore, for engineers, insufficient supervision was a major influencing factor. In conclusion, because the accident characteristics of suppliers and engineers are different, differentiated accident prevention strategies should be implemented, which was discussed in this study.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1435-1444
• /
• 2006

We present an effective and real-time face detection method based on Principal Component Analysis(PCA) and Support Vector Machines(SVMs). We extract simple Haar-like features from training images that consist of face and non-face images, reinterpret the features with PCA, and select useful ones from the large number of extracted features. With the selected features, we construct a face detector using an SVM appropriate for binary classification. The face detector is not affected by the size of a training data set in a significant way, so that it showed 90.1 % detection rates with a small quantity of training data. it can process 8 frames per second for $320{\times}240$ pixel images. This is an acceptable processing time for a real-time system.