• Advances in materials Research
• /
• v.1 no.1
• /
• pp.83-92
• /
• 2012

The effect of under-bump-metallization (UBM) on electromigration was investigated at temperatures ranging from $135^{\circ}C$ to $165^{\circ}C$. The UBM structures were examined: 5-${\mu}m$-Cu/3-${\mu}m$-Ni and $5{\mu}m$ Cu. Experimental results show that the solder joint with the Cu/Ni UBM has a longer electromigration lifetime than the solder joint with the Cu UBM. Three important parameters were analyzed to explain the difference in failure time, including maximum current density, hot-spot temperature, and electromigration activation energy. The simulation and experimental results illustrate that the addition 3-${\mu}m$-Ni layer is able to reduce the maximum current density and hot-spot temperature in solder, resulting in a longer electromigration lifetime. In addition, the Ni layer changes the electromigration failure mode. With the $5{\mu}m$ Cu UBM, dissolution of Cu layer and formation of $Cu_6Sn_5$ intermetallic compounds are responsible for the electromigration failure in the joint. Yet, the failure mode changes to void formation in the interface of $Ni_3Sn_4$ and the solder for the joint with the Cu/Ni UBM. The measured activation energy is 0.85 eV and 1.06 eV for the joint with the Cu/Ni and the Cu UBM, respectively.

• Journal of the Korean Ceramic Society
• /
• v.49 no.2
• /
• pp.191-196
• /
• 2012

In this study, tin phosphate glass system($SnO_2-(1-x)P_2O_5-xB_2O_3$) that occur during the melting of the metal oxide inhibition of the oxidation reaction, and to reduce oxides of high melting temperature in the following three methods were melting. The first is the general way in the atmosphere, and the second by injecting $N_2$ gas under a neutral atmosphere, and finally in the air were melted by the addition of a reducing agent Melt in the atmosphere when the oxidation of the metal oxide is inhibited by low temperatures were melting. In addition, the deposition of crystals within glassy or inhibit devitrification phenomenon is also improved over 80% transmittance. This phenomenon, when the melting of glass, many of $Sn^{4+}$ ions are reduced to the $Sn^{2+}$ was forming oxides SnO, because it acts as a modifier oxide.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.879-888
• /
• 2001

The effects of final annealing temperature on the microstructure and creep characteristics were investigated for the Zr-lNb-0.2X (X=0, Mo, Cu) and Zr-lNb- 1Sn-0.3Fe-0.1X (X=0, Mo, Cu) alloys. The microstructures were observed by using TEM/EDS, and grain size and distributions of precipitates were analyzed using a image analyzer. The creep test was performed at $400^{\circ}C$ under applied stress of 150 MPa for 10 days. The $\beta$-Zr was observed at annealing temperature above $600^{\circ}C$. In the temperature above$ 600^{\circ}C$, the grain sizes of both alloy systems appeared to be increased with increasing the final annealing temperature. The creep strengths of Zr-1Nb-1Sn-0.3Fe-0.1X alloys were higher than those of Zr-1Nb-0.2X ones due to the effect of solid solution hardening by Sn in Zr-lNb-lSn-0.3Fe-0.1X alloy system. Also, Mo addition showed the strong effect of precipitate hardening in both alloy systems. The creep strength rapidly decreased with increasing the annealing temperature up to $600^{\circ}C$. However, a superior creep resistance was obtained in the sample that annealed to have a second phase of $\beta$-Zr. It was considered that the appearance of $\beta$-Zr would play an important role in the strengthening mechanism of creep deformation.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.1-9
• /
• 1994

In order to study the effect of mordanting on silk fabrics treated with tannin, those fabrics were treated with Al, Cu, Cr, Fe, Sn by pre and post mordanting. It was studied about color change, weighting effect, dgree of photodegradation by pre and post mordanting. The results are as fallows ; 1. On the addition of mordants into mimosa and tannic acid solution, &{\lambda}_{max}& of the former was slightly blue-shifted, on the other hand, &{\lambda}_{max}& of the latter was obviously Red-shifted. 2. In case of Cu, Cr, Pre mordanting, weighting effect were appeared. Weighting effect of silk fabrics treated with Tannic acid increased higher than mimosa by mordanting. 3. In color change, Silk fabrics treated with Mimosa and Tannic acid generally changed to red direction and fabrics treated with tannic acid changed to yellow direction by pre and post mordanting. 4. In the photodegradation, the degree of photodegradation on mordanted fabrics increased. Its degree was slack in Cu, Cr, Post mordanting. On the other hand, Al, Fe, Sn were greate. Silk fabrics treated with Mimosa and Tannic acid got inhibiting effect on photodegradation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.167-167
• /
• 2002

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.35-40
• /
• 2005

The oxidation of pure Sn and Sn-0.7Cu, Sn-3.5Ag, Sn-lZn, and Sn-9Zn alloys at $150^{\circ}C$ was investigated. Both the chemical nature and the amount of oxides were characterized using electrochemical reduction analysis by measuring the electrolytic reduction potential and total transferred electrical charges. X-ray photoelectron spectroscopy (XPS) was also conducted to support the results of reduction analysis. The effect of Cu, Ag and Zn addition on surface oxidation of Sn alloys is reported. For Sn, Sn-0.7Cu and Sn-3.5Ag, SnO grew first and then the mixture of SnO and $SnO_2$ was found. $SnO_2$ grew predominantly for a long-time aging. For Zn containing Sn alloys, both ZnO and $SnO_2$ were formed. Zn promotes the formation of $SnO_2$. Sn oxide growth rate of Pb-free solder alloys was also discussed in terms of alloying elements.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.980-989
• /
• 2020

The objective of this study was to compare the effects of various salts on the physicochemical properties of pork emulsion sausages. Pork sausages were prepared using two different salts, sodium nitrite (SN) and sodium chloride (SC), and concentrated seawater (CSW). The CIE L*, CIE a*, and CIE b*, and chroma values of cooked and uncooked sausages with added CSW were significantly higher than those of the sausages with added SC (p<0.05). However, uncooked and cooked sausages with added SN and CSW had similar CIE a* values (p>0.05). The residual NO₂^- content of sausages with added CSW was significantly lower than that of sausages with added SN. Addition of CSW to sausages resulted in a higher cooking yield compared to the other treatments (p<0.05). Addition of SC resulted in significantly higher volatile basic nitrogen (VBN) and thiobarbituric acid (TBA) values compared to the other treatments. Furthermore, addition of CSW enhanced important physicochemical properties, including CIE a*, CIE b*, residual nitrite content, cooking yield, VBN, TBA, textural properties, and cross-sectional area.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.443-449
• /
• 1997

The purpose of this study is to investigate the effect of P addition and homogenizing heat treatment on the mechanical properties of Cu-Sn-Ni alloy. The addition of P was 0.025wt.%P to 0.085wt.%P and homogenizing heat-treated at 400, 500, $600^{\circ}C$ under $N_2$ gas atmosphere. Mechanical properties was investigated in this study were Rockwell hardness, tensile strength, and elongation. Tensile strength and elongation increased with P and homogenizing time. Temperature was significantly influence on mechanical properties. Hardness decreased with increasing homogenizing time and temperature, but 0.085wt.%P specimen was showed higher hardness and lower tensile strength and elongation than 0.073wt.%P specimen due to the presence of more $Cu_3P$ in matrix.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.86.1-86.1
• /
• 2010

Cu2ZnSnSe4는 CIS 태양전지의 In 대체 물질계로 주목을 받고 있는 저가형 태양전지 재료로 장차 차세대 태양전지 재료로 응용이 기대되고 있다. 그러나 에너지 밴드갭이 0.9~1.1eV로 다소 낮아 태양전지 광흡수층 재료로 사용하기 위해서는 wide band gab화 처리가 필요하다. 본 연구에서는 CZTSe에 S를 첨가하여 에너지 밴드갭을 확장하고자 하며, S의 첨가가 CZTSe 박막의 특성에 미치는 영향에 대하여 조사하였다. 실험의 편의성을 도모하고자 펄스레이저 법을 사용하여 증착하였다. 박막 조성 제어에는 Cu, Zn, Sn, Se, S 분말을 볼밀로 분쇄, 혼합하여 균질 혼합상 프리커서를 제조하고 이를 Cold Isostatic Press(CIP) 성형하여 Source target을 사용하였다. Pulsed YAG-Laser를 사용하여 soda lime glass상에 증착하고 조성, 구조, 조직을 관찰하고 에너지 밴드갭, 광흡수계수, 면저항, 전하밀도 등 특성을 조사하였다.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.2
• /
• pp.90-95
• /
• 2019

Methylammonium lead bromide ($MAPbBr_3$) has attracted a lot of attention due to their excellent optoelectronic properties such as the compositional flexibility relevant to photoluminescence (PL) and UV-Vis absorbance spectrum, high diffusion length, and photoluminescence quantum yield (PLQY). Despite such advantages of organic-inorganic perovskite materials, more systematic study on manipulation of their optoelectronic properties in homo- or heterovalent metal ions doped halide perovskite nanocrystals is lacking. In this study, we systematically investigated the optical properties of colloidal $CH_3NH_3Pb_{1-x}Sn_xCl_{2x}Br_{3-2x}$ particles by addition of $SnCl_2$ into the typical methylammonium lead tribromide ($CH_3NH_3PbBr_3$) precursor solution. We found that only 1% addition of $SnCl_2$ shows a significant blue-shift from 540 nm to 420 nm in UV-Vis absorbance spectrum due to the strong quantum confinement effect. Furthermore, continuous blue-shift in photoluminescence spectra was observed as the amount of Cl increases. These experimental results provide new insights into the replacement of Pb within $MAPbBr_3$, required for the broadening of their application.