• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.825-832
• /
• 2006

The effect of alginate coating in combination with an anti-browning agent on increasing the post-cutting shelf life and improving the quality of minimally processed apple cubes was studied during storage at room temperature for 5 days. A simple coating technique involving the chemical cross-linkage of alginate by calcium was used. Statistical-based experimental designs were applied to improve the quality of the alginate-coated apple cubes (ACAC). Plackett-Burman design was first used to determine the main factors influencing the preservation of the original weight, color, and texture of ACAC. Among these variables, alginate concentration ($X_1$), dipping time ($X_2$), and dipping temperature ($X_3$) significantly influenced the ACAC weight and color (confidence levels above 90%). Subsequently, the effects of the 3 main factors were further investigated by a central composite design. The polynomial models developed by response surface methodology were adequate to describe the relationships between the studied factors and the responses. Overall optimization conducted by superimposing the curves of the responses enabled the determination of an optimal range of the independent variables in which the five responses were simultaneously optimized. The point chosen as representative of this optimal area corresponded to $X_1=2.98%$, $X_2=0.85\;min$, and $X_3=55^{\circ}C$ and under these conditions the model predicted weight loss=0.522%, relative hardness=1.517, ${\Delta}E=1.423$, browning inhibition=93.403%, and ${\Delta}L=0.158$.

• Journal of Ginseng Research
• /
• v.33 no.3
• /
• pp.229-233
• /
• 2009

The centrifugal coating granulating system, a new method of preparing red ginseng extract pills, has been developed. The red ginseng extract was first powdered with 85.5% of edible ethanol and dried for 3 to 4 hours at 50$^{\circ}C$. The powders were fed in chamber of centrifugal coating granulating system and then granulated, sequentially. The centrifugal system operated at 20 to 50$^{\circ}C$ of inlet temperature, 1 to 1,000 g/min of feeding speed, 60 to 70$^{\circ}C$ of atmosphere temperature of intake, 3.0 to 4.0 bar of spray atmosphere pressure, 1,000 to 1,500 rpm of centrifugal plate speed and 25 to 40$^{\circ}C$ of outlet temperature. The product yield was about 85% and preparation time was 7 to 8 hours. Especially, major ginsenoside components of red ginseng were not decomposed after processing of red ginseng extract pill.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.648-652
• /
• 2002

Removing shup from oyster by aeration method and coating with edible coating materials were investigated to improve oyster quality for the retort processing. Aeration rate and pore size of nozzle were critical factors to remove shup by aeration method. Optimum aeration rate and nozzle size were 45 L/min and 0.4 mm, respectively, when aeration was peformed two times and each operation maintained for 1 minute. Sodium alginate (SA) was used for oyster as the basal coating material. However, SA affected mouth-feel when it was applied at high concentrations. Sub-coating materials including skim milk, waxy corn starch, Purity CSC, white corn starch and carboxymethylcellulose (CMC) in decreasing order showed a positive effect on improving coatability and mouth-feel. Therefore, it is suggested that 1.5% SA and 0.9% skim milk should be the optimum composition of coating materials for oyster. Browning and syneresis of the porridge containing the coated oyster were considerably inhibited as compared with the sample without the coated oyster.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1184-1190
• /
• 1997

Corn zein coated carrageenan films were manufactured by immersing preformed ${\kappa}-carrageenan$ films into solution of different concentrations of corn zein (CZ) solids (10, 20, and 30% in 95% ethyl alcohol) with polyethylene glycol (20% w/w of CZ), glycerol (24% w/w of CZ). For all types of films, water vapor permeability (WVP), water solubility (WS), swelling ratio (SR), tensile strength (TS), percent elongation at break (E), heat sealing strength (HS), and Hunter color values (L, a, and b) were determined. WVP of corn zein coated ${\kappa}-carrageenan$ films decreased significantly (p<0.05) as the concentration of com zein increase. Coating with corn zein also decreased film WS and SR linearly with the concentration of corn zein. TS of corn zein coated carrageenan films decreased linearly with corn zein concentration. All the com rein coated carrageenan films showed heat sealing properties even though their sealing strength was less than half of corn zein film. Obviously corn zein coating affected color of ${\kappa}-carrageenan$ films, which was mainly caused by increase in yellowness (Hunter b-value).

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1374-1383
• /
• 2003

The effect of applying edible coating and addition of antioxidants (butylated hydroxyanisole (BHA) plus butylated hydroxytoluene (BHT) in a 1:1 ratio) on pork patties were investigated prior to achieve desired physico-chemical, microbiological and sensory qualities. For this, five treatments were conducted as (i) control (neither coated nor antioxidants treated); (ii) coated without antioxidants treated; (iii) coated and antioxidants added in the batter mix only (100 ppm); (iv) coated and antioxidants added in meat mix (100 ppm) only; and (v) coated and antioxidants added both in the batter mix (50 ppm) and the meat mix (50 ppm). Addition of antioxidants both in the batter mix and the meat mix significantly (p<0.05) reduced the microbial loads and thiobarbituric acid (TBA) values. The TBA values significantly (p<0.05) increased up to day 14 and then progressively increased with the advancement of each interval of storage days up to 28 days. Total plate count significantly (p<0.05) increased with the increase in storage days.Coliform and Staphylococcus aureus were absent throughout the storage days in all samples. Staphylococcus aureus however, were present in the control group at day 14 and in enrobed (coated) patties (without antioxidants treated) at 28th day. Addition of antioxidants to batter mix and meat mix did not substantially enhance bacteriostatic activity. Application of coatings and antioxidants retarded the loss of firmness, flavor, changes in appearance and color, and also other sensory attributes. Control patties were better with respect to microbial quality and TBA values but had poorer sensory quality than coated patties.

• Applied Biological Chemistry
• /
• v.45 no.4
• /
• pp.207-211
• /
• 2002

This study was conducted to increase the shelf life of grape by edible coating material such as methyl cellulose (MC) with antimicrobial substances, n-capric acid isopropyl ester (ci) and sodium nitrate (sn), added by spraying method. The quality changes of packaged grapes with wrapping PE film on EPS tray were investigated for 16 days at $30{\circ}C$. The shelf-lives of C and MCci based on the weight reduction ratio of 7% were 6 days and 9 days, respectively. The reduction rate of acidity of C was higher value than those of treatments during 18 days of storage at $30{\circ}C$. The vitamin C reduction ratios of C, MCsn and MCci were 64.8, 51.5 and 49.8%, respectively, after 16 days at $30{\circ}C$. The reduction rates of firmness of C, MCsn and MCci after 16 days at $30{\circ}C$ were 44.2, 26.5, and 23,2%, respectively compared to that of initial storage grapes. The additions of ci and sn had much affected the reductions of bacteria and yeast counts especially early stage of storage. The hedonic sensory evaluation scores of MCci and MCsn had higher values than those of MC.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.1-7
• /
• 1996

Three formulations were used to prepare the cellulose-based edible films consisting of hydrocolloid and lipids; film A made by coating method, films B and C by emulsion method, which were formed in a thin layer glass plate and then dried. Films A, B and C were all approximately 0.03 mm thick with 1-3% moisture, 59-68% lipid, and almost whitish color. Film A was better in tensile strength, and lipids affected water vapor permeability on three films, in which films A and B did not differ significantly. Water vapor permeability of film A did not change but those of films B and C decreased significantly after storage for 8 weeks at $-15^{\circ}C$. Oxygen transmission rate and oxygen permeability of films A and C did not differ and changed significantly after 8-week storage at $-15^{\circ}C$. Under scanning electron microscope (SEM) observation on the structural characteristics of each film, film A indicated relatively uniform and smooth surface coatings of beeswax, while films B and C had individual lipid crystals and could be discerned. As a result, film A was better than films B and C in respect of physical properties, but the selection of useful film depended upon which physical property was more functional. Moreover, it was desirable in some cases for using films B and C because of their easiness of preparation and cold storage durability. It will be further needed to investigate how to formulate films B and C to have more unique surface characteristics, and to reduce water vapor and oxygen transmission rates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.293-300
• /
• 2016

In the present study, we investigated the quality, sensory characteristics and commercialization potential of a rice collet snack made with the addition of dried shrimp. “Mild” and “spicy” snack products were produced with an edible oil coating and mixed seasoning powder coating, respectively. The approximate composition of the mild and spicy snacks, respectively, were 2.44% and 2.24% for moisture, 8.52% and 8.64% for crude protein, 18.36% and 26.54% for crude lipids, 1.28% and 1.38% for ash, 1.1% and 1.2% for salt, and 0.61 and 0.62 for pH. The L (lightness), a (redness), b (yellowness), and ⊿E (color difference) values were higher for the mild snack than the spicy snack. The mild and spicy snack had values of 7,776.4 and 7,655.8 mg/100 g for total amino acids, and 221.6 and 253.5 mg/100 g for total free amino acids, respectively. The TBA (thiobarbituric acid) value did not differ significantly between the two types of snack. The hardness value of the spicy snack was higher than that of the mild snack, but there were no significant differences in flavor between the two products. The sensory evaluation score of the spicy snack was slightly higher than that of the mild snack. Organoleptic inspection indicated that both snacks had a favorable, unique taste.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.2
• /
• pp.101-107
• /
• 2005

The term 'antimicrobial' packaging encompasses any packaging technique(s) used to control microbial growth in the food product. These include packaging materials and edible films and coatings that contain antimicrobial agents, and also techniques that modify the atmosphere within the package. In recent years, antimicrobial packaging has attracted much attention from the food industry because of the increase in consumer demand for minimally processed, preservative-free products. Reflecting this demand, the preservative agents must be applied to packaging in such a way that only low levels of preservatives come into contact with the food. The film or coating technique is considered to be more effective, although more complicated to apply. New antimicrobial packaging materials are being developed continually. Many of them exploit natural agents, to control common food-borne microorganisms. Current trends suggest that in due course, packaging will generally incorporate antimicrobial agents and the sealing systems will continue to improve. The focus of packaging in the past has been on the appearance, size and integrity of the package. A greater emphasis on safety features associated with the addition of antimicrobial agents is perhaps the next area for development in packaging technology.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.55-62
• /
• 2023

This study aimed to investigate the effect of a coating agent on pork storage. Pork was coated with a coating agent containing sodium carboxymethyl cellulose (CMC) and mandarin peel powder (M). The treatments were divided into control, a 0.1% CMC treatment, and a 0.1% CMC +5% M treatment, and pH, color, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN), and the number of viable cell counts were measured. In the case of redness (a), it was found that the reduction over the storage period was less in the 0.1% CMC + 5% M treatment than in the control and the 1% CMC treatment. When stored at 4℃ and 25℃, TBARS of pork tended to increase during the storage period, followed by control, 0.1% CMC treatment, and 0.1% CMC + 5% M treatment, indicating that lipid oxidation was most suppressed in pork coated with mandarin peel powder. As a result of measuring the VBN of pork stored at 4℃ and 25℃, the 0.1% CMC + 5% M treatment showed lower values than the control and 0.1% CMC treatment. When the film-coated pork was stored at 4℃, the number of viable cell counts in the 0.1% CMC +5% M treatment area was 7.13±0.96 log CFU/g on the 12th day of storage, delaying the growth of viable cell counts for approximately 3 d more than other treatments. Therefore, coating pork with a film containing CMC and mandarin peel powder has been confirmed to delay the increase in the number of viable cell counts while reducing the quality change during pork storage, which is an effective alternative to improving the storage of fresh food as an edible film.