• Title/Summary/Keyword: edge-crossing

Search Result 43, Processing Time 0.026 seconds

A Study on the Mark Reader Using the Image Processing (영상처리를 이용한 Mark 판독 기법에 관한 연구)

  • 김승호;김범진;이용구;노도환
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.83-83
    • /
    • 2000
  • Recently, Vision system has being used all around industry. Sensor systems are used for Mark Reader, for example, optical scanning is proximity sensor system, have many disadvantages, such as, lacking user interface and difficulty to store original specimens. In contrast with this, Vision systems for Mark Reader has many advantages, including function conversion to achieve other work, high accuracy, high speed, etc. In this thesis, we have researched the development of Mark Reader by using a Vision system. The processing course of this s)'stem is consist to Image Pre-Processing such as noise reduction, edge detection, threshold processing. And then, we have carried out camera calibration to calibrate images which are acquired from camera. After searching for reference point within scanning area(60pixe1${\times}$30pixe1), we have calculated points crossing by using line equations. And then, we decide to each ROI(region of interest) which are expressed by four points. Next we have converted absolute coordinate into relative coordinate for analysis a translation component. Finally we carry out Mark Reading with images classified by six patterns. As a result of experiment which follows the algorithm has proposed, we have get error within 0.5% from total image.

  • PDF

Medial Axis Detection of Stripes Using LoG Scale-Space (LoG Scale-Space를 이용한 라인의 중심축 검출)

  • Byun, Ki-Won;Nam, Ki-Gon;Joo, Jae-Heum
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.11 no.3
    • /
    • pp.183-188
    • /
    • 2010
  • In this paper we propose a detection method of the medial axis of the continuous stripes on the LoG scale-space. Our method detects the medial axis of continuous stripes iteratively by varying the scale of LoG operator. Small-scale LoG operator detects two +/- pole pairs centered on the edge positions of stripe by the zero-crossing detection. The more increase the scale of LoG scale-space, the more close two poles to the medial axis of stripe. The medial axis of continuous stripe is the position where two poles is overlapped. The proposed method detected robustly the medial axis of continuous stripes stronger than the thinning methods used to binary image.

A Study on the Costume of Khotan (우전(Khotan)의 복식에 관한 연구)

  • 김소현
    • Journal of the Korean Society of Costume
    • /
    • v.34
    • /
    • pp.169-182
    • /
    • 1997
  • Focusing on khotan located in the southern Silk Route which was one of the most important kingdoms in the Tarim Basin this study attempts to examine the changes of costume in Khotan by compar-ing the costumes in the painted panel showing the story of silk princess with the excavated costumes from ancient tombs. Furthermore this study attempts to inves-tigate the impacts of cultural exchange be-tween China and its western neighboring country Eastern and Western Turkestan on costume. Excavated costumes from the Shanpula ancient tomb in the region of Khotan and from ancient Niya in the esat-ern border of Khotan and discoveries from Rawak and Dandan-oilik near by Yotkan the ancient capital of Khotan are exam-ined. Basic Khotan's costume was the two piece style of tops and trousers. Over the basic costume wearing a top wear with half sleeves was popular. Skirt was worn by women. Even though there were many kinds tops were classified into the two types kaftan and tunic. Thouth Khotan maintained a association with China for a long time the style of Khotan costume had imbued to China. Top wear with half sleeves was worn frequently in Khotan. Also in China top wear with half sleeves was worn as over-wear which was called ban-xiu ban-bi bei-zi Costume style of China is covering the body profoundly and wrapping front edge toward the right. The types of chi-nese top wear with half sleeves for exam-ple round-neck·confronting front edge crossing-neck·confronting front edge tu-nic type discord with the traditional chi-nese costume style There were many cas-es that half sleeved top wear was worn as over wear in T'ang dynasty. The phenom-enon was due to the prevalence of 'ho' (foreign) and half sleeved top wear was introduced by the countries to the west of China Khotan. A round neck garment was a general type for the men of cuntries to the westof China. Also Chinese wore round neck garment since South and North Dynasty The type of Chinese round neck garment was not tunic but kaftan. From costume relics and ancient paintings the type of Khotan's round neck garment was tunic which was recorded on the Chinese histori-cal documents as " guan-tou-shan" that is tunic the type of persian costume, Even thgough the painted panel showing the sto-ry of silk princess was made in the it me when Turks was a dominion on Central Asia Khotan's costume style was not changed toward Turk's costume style and remained tunic style.

  • PDF

Grand Circulation Process of Beach Cusp and its Seasonal Variation at the Mang-Bang Beach from the Perspective of Trapped Mode Edge Waves as the Driving Mechanism of Beach Cusp Formation (맹방해안에서 관측되는 Beach Cusp의 일 년에 걸친 대순환 과정과 계절별 특성 - 여러 생성기작 중 포획모드 Edge Waves를 중심으로)

  • Cho, Yong Jun
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.31 no.5
    • /
    • pp.265-277
    • /
    • 2019
  • Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.

Magnetic Resonant Wireless Power Transfer Using Reconfigurable Slit Ground Resonator for Laptop Computer (재구성 슬릿 그라운드 공진기를 이용한 노트북용 자기공진형 무선전력전송)

  • Kang, Seok Hyon;Jung, Chang Won
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.1
    • /
    • pp.69-75
    • /
    • 2017
  • In this paper, slit ground resonator with slit and capacitor is proposed for practical use of magnetic resonant wireless power transfer(MR-WPT). And this paper presents the performance comparison of conventional loop resonator as Rx resonator to slit ground resonator. The proposed silt ground resonator with 31 cm width, 20.5 cm length, $35{\mu}m$ thickness is designed the crossing slit 1 cm width with only opened edge. And an external capacitors were connected at the opened edge of slit ground resonator for resonating at 6.78 MHz. The transfer efficiencies of MR-WPT were measured at open and short mode, and then the highest transfer efficiencies of MR-WPT according to the Rx resonators were plotted. In result, the transfer efficiency of MR-WPT with loop resonator was the highest. However, when the ground was inserted in receiver part at the bottom of laptop model, the transfer efficiency was closed 0 %. The transfer efficiency recovered the transfer efficiency of 67 % using slit ground resonator. The magnetic field was penetrated through the slit and proposed slit ground resonator works as resonator in MR-WPT.

Path-finding Algorithm using Heuristic-based Genetic Algorithm (휴리스틱 기반의 유전 알고리즘을 활용한 경로 탐색 알고리즘)

  • Ko, Jung-Woon;Lee, Dong-Yeop
    • Journal of Korea Game Society
    • /
    • v.17 no.5
    • /
    • pp.123-132
    • /
    • 2017
  • The path-finding algorithm refers to an algorithm for navigating the route order from the current position to the destination in a virtual world in a game. The conventional path-finding algorithm performs graph search based on cost such as A-Star and Dijkstra. A-Star and Dijkstra require movable node and edge data in the world map, so it is difficult to apply online games with lots of map data. In this paper, we provide a Heuristic-based Genetic Algorithm Path-finding(HGAP) using Genetic Algorithm(GA). Genetic Algorithm is a path-finding algorithm applicable to game with variable environment and lots of map data. It seek solutions through mating, crossing, mutation and evolutionary operations without the map data. The proposed algorithm is based on Binary-Coded Genetic Algorithm and searches for a path by performing a heuristic operation that estimates a path to a destination to arrive at a destination more quickly.

Long-baseline single-layer 2nd-order $high-T_c$ SQUID gradiometer (긴기저선을 가진 단일층 고온초전도 SQUID 2차미분기)

  • Lee Soon-Gul;Kang Chan Seok;Kim In-Seon;Kim Sang-Jae
    • Progress in Superconductivity
    • /
    • v.7 no.1
    • /
    • pp.6-10
    • /
    • 2005
  • We have studied feasibility of single-layer second-order $high-T_c$ SQUID gradiometers in magnetocardiography. We have measured human cardiomagnetic signals using a short-baseline (5.8 mm) single-layer second-order YBCO gradiometer in partially shielded environments. The gradiometer has an overall size of $17.6\;mm{\times}6\;mm$ and contains three parallel-connected pickup coils which are directly coupled to a step-edge junction SQUID. The gradiometer showed an unshielded gradient noise of $0.84\;pT/cm^2/Hz^{1/2}$ at 1 Hz, which corresponds to an equivalent field noise of $280\;fT/Hz^{1/2}$. The balancing factor was $10^3$. Based on the same design rules as the short-baseline devices, we have studied fabrication of 30 mm-long baseline gradiometers. The devices had an overall size of $70.2\;mm{\times}10.6\;mm$ with each pickup coil of $10\;mm{\times}10\;mm$ in outer size. As Josephson elements we made two types of submicron bridges, which are variable thickness bridge (VTB) and constant thickness bridge (CTB), from $3\;{\mu}m-wide$ and 300 nm-thick YBCO lines with a thin layer of Au on top by using a focused ion beam (FIB) patterning method. VTB was 300 nm wide, 200 nm thick, 30 nm long with Au removed and CTB 100 nm wide and 30 nm long. In temperature-dependent critical currents, $I_c(T)$, VTB showed an nonmetallic barrier-type behavior and CTB an SNS behavior. We believe that those characteristics are ascribed to naturally formed grain boundaries crossing the bridges.

  • PDF

Electrostatic Coupling Intra-Body Communication Based on Frequency Shift Keying and Error Correction (FSK 통신 및 에러 정정을 통한 Intra-Body Communication)

  • Cho, Seongho;Park, Daejin
    • IEMEK Journal of Embedded Systems and Applications
    • /
    • v.15 no.4
    • /
    • pp.159-166
    • /
    • 2020
  • The IBC (Intra-Body Communication) benefits from a wireless communication system for exchanging various kinds of digital information through wearable electronic devices and sensors. The IBC using the human body as the transmission channel allows wireless communication without the transmitting radio frequency waves to the air. This paper discusses the results of experiments on electrostatic coupling IBC based on FSK (Frequency Shift Keying) and 1 bit error correction. We implemented FSK communication and 1 bit error correction algorithm using the MCU boards and aluminum tape electrodes. The transmitter modulates digital data using 50% duty square wave as carrier signal and transmits data through human body. The receiver performs ADC (Analog to Digital Conversion) on carrier signal from human body. In order to figure out the frequency of carrier signal from ADC results, we applied zero-crossing algorithm which is used to detect the edge characteristic in computer vision. Experiment results shows that digital data modulated as square wave can be successfully transmitted through human body by applying the proposed architecture of a 1ch GPIO as a transmitter and 1ch ADC for as a receiver. Also, this paper proposes 1 bit error correction technique for reliable IBC. This technique performs error correction by utilizing the feature that carrier signal has 50% duty ratio. When 1 bit error correction technique is applied, the byte error rate at receiver side is improved around 3.5% compared to that not applied.

Breeding for New Evergreen Dianthus Cultivar 'URI 2010-6' with Bright Red Flower Color (밝은 적색계의 상록성 패랭이꽃 신품종 'URI 2010-6' 육성)

  • Park, Kong-Young;Hwang, Hyeon-Jeong;Choi, Geun-Won
    • Horticultural Science & Technology
    • /
    • v.33 no.1
    • /
    • pp.143-148
    • /
    • 2015
  • A new Dianthus cultivar 'URI 2010-6' was selected among F1 progenies from a cross between interspecific hybrid 'Evergreen Emerald' as the seed parent and D. chinensis ' Ruby' as the pollen parent. In 2007, the cross w as made, and the seedlings of $F_1$ progenies were obtained and investigated. After three rounds of characteristic evaluation from 2008 to 2010, a clone was selected and registered as 'URI 2010-6' at the Korea Seed and Variety Service (plant variety protection number: 4431) in 2011. The flower of 'URI 2010-6' is caryophyllaceous, single type, and mainly bright red (Red, N79C) with secondary white (White, N155C) on the edge or as spots on the petal. The flower has diameter of 2.7 cm and length of 0.8 cm. This cultivar blooms continuously about 150 d on average and may be used as evergreen plant during winter months.

Cultivation of Hosta minor 'Cheongnarae' with Thick Leaves and Light-Colored Petals (잎이 강건하고 화색이 엷은 좀비비추 '청나래' 육성)

  • Oh, Hye Jin;Lee, Jong Suk;Kim, Jin-Ho;Kim, Sang Yong;Suh, Gang Uk
    • Korean Journal of Plant Resources
    • /
    • v.34 no.1
    • /
    • pp.73-78
    • /
    • 2021
  • We report a technique for obtaining seeds of 'Cheongnarae' (a variety of Hosta minor cultivated at the Korea National Arboretum in 2019) by artificial crossing of H. minor, collected from Jeju Island, as the female parent and H. minor 'Krossa Regal', cultivated outside Korea, as the male parent. Among the individuals obtained after sowing, those that showed different morphological characteristics, such as leaf shape and color, were selected. Among these individuals, those with thick leaves and light-colored flowers were further selected. Vegetative propagation and cultivation steps were repeated for evaluation of the characteristics. 'Cheongnarae' has relatively thicker leaves and a darker color (RHS 137A) than the control variety 'Black Hills' and has wings at the point where the petiole meets the leaf blade. The shape of the leaf blade edge is clearly sinuous, and the flower color is close to white (White N155B). 'Cheongnarae' cultivated in this way can be used for pot plant or gardening.