• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.990-1002
• /
• 2016

In this paper, we propose a new compression method for the edge image by analyzing the characteristics and the distribution of pixel values of the edge image. The pixel values of the edge image have the Gaussian distribution around '0', and most of the pixel values are `0`. By these analyses we suggest the Zero-Based codec that expresses all values in a CU by a single bit flag. Also, in order to reduce the computational complexity of the proposed codec, the block partition and the intra-prediction techniques are proposed by using edge information like the number of each edge direction, the distribution and the amplitude of a major edge direction in the CU. Experimental results show that the proposed codec leads to a slighter distortion in Y domain than that of HEVC, but has far faster processing speed up to 53 times while it maintains the similar image quality compared to HEVC.

• ETRI Journal
• /
• 제24권1호
• /
• pp.23-30
• /
• 2002

MPEG-7 Visual Standard specifies a set of descriptors that can be used to measure similarity in images or video. Among them, the Edge Histogram Descriptor describes edge distribution with a histogram based on local edge distribution in an image. Since the Edge Histogram Descriptor recommended for the MPEG-7 standard represents only local edge distribution in the image, the matching performance for image retrieval may not be satisfactory. This paper proposes the use of global and semi-local edge histograms generated directly from the local histogram bins to increase the matching performance. Then, the global, semi-global, and local histograms of images are combined to measure the image similarity and are compared with the MPEG-7 descriptor of the local-only histogram. Since we exploit the absolute location of the edge in the image as well as its global composition, the proposed matching method can retrieve semantically similar images. Experiments on MPEG-7 test images show that the proposed method yields better retrieval performance by an amount of 0.04 in ANMRR, which shows a significant difference in visual inspection.

• 응용통계연구
• /
• 제25권6호
• /
• pp.1019-1026
• /
• 2012

This paper presents a method for the identification of "edge observations" located on a boundary area constructed by a truncation variable as well as for the identification of outliers and the after fit of multivariate skew $t$-distribution(MST) to asymmetric data. The detection of edge observation is important in data analysis because it provides information on a certain critical area in observation space. The proposed method is applied to an Australian Institute of Sport(AIS) dataset that is well known for asymmetry in data space.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.823-827
• /
• 2008

The effects of blade leading edge sweep on both the aerodynamic performance and the structure stress of a high pressure centrifugal compressor impeller are numerically investigated. Changes in the flow structure occur as a result of the effect of leading edge sweep on the loading distribution in the tip region. The flow separation is avoided by introducing a sweep of the main blade leading edge and the strength of shock is reduced at the same time. Backswept of the leading edge is found to be beneficial to the impeller performance improving. On the other hand, the structural analysis indicated that high rotating speed of the impeller will cause substantial high bending stresses and radial deflections of the blade. Studies have shown that it is possible to control the stress distribution along the tip and root of the blade by slight adjustments to the sweep angle of the leading edge. These adjustments may be used to design the impeller with lower blade root stress distribution without aerodynamics performance penalty.

• Structural Engineering and Mechanics
• /
• 제21권1호
• /
• pp.67-82
• /
• 2005

This study analyzes stress intensity factors for a number of periodic edge cracks in a semiinfinite medium subjected to a far field uniform applied load along with a distribution of eigenstrain. The eigenstrain is considered to be distributed arbitrarily over a region of finite depth extending from the free surface. The cracks are represented by a continuous distribution of edge dislocations. Using the complex potential functions of the edge dislocations, a simple as well as effective method is developed to calculate the stress intensity factor for the edge cracks. The method is employed to obtain the numerical results of the stress intensity factor for different distributions of eigenstrain. Moreover, the effect of crack spacing and the intensity of the normalized eigenstress on the stress intensity factor are investigated in details. The results of the present study reveal that the stress intensity factor of the periodic edge cracks is significantly influenced by the magnitude as well as distribution of the eigenstrain within the finite depth. The eigenstrains that induce compressive stresses at and near the free surface of the semi-infinite medium reduce the stress intensity factor that, in turn, contributes to the toughening of the material.

• 소성∙가공
• /
• 제28권3호
• /
• pp.154-158
• /
• 2019

The hole expansion tests using conical punch, flat punch or hemispherical punch are widely used for stretch flangeability verification of HSS. In this study, we investigate the strain distribution on the shear edges of the hole expansion test using grid marking and a projector. A small crack at the edge is distributed, resulting in a large gap between the HER and the crack strain. The strain distribution at the edges is irregular due to anisotropy of sheet metal. While an edge perpendicular to the rolling direction indicate a lower strain level compared to an edge parallel to the rolling direction, edge cracks occur at the edge perpendicular to the rolling direction. To predict the manifestation of edge cracks in FE analysis, the result of the hole expansion test with a crack strain measurement may well be a better tool than FLD. In this case, the level of strain and the direction of the edge relative to the rolling direction should be well considered.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1062-1068
• /
• 2004

정자표면파가 전파되는 주파수 영역에서 페라이트 위에 놓여진 선로의 모서리 특이성을 Meixner가 제시한 방법을 이용하여 계산하였다. 구해진 모서리 특이성으로부터 정자표면파가 진행하는 방향의 모서리 부근에서의 전류 변화가 반대쪽 모서리에 비하여 급격함을 알 수 있었다. 또한 주파수 변화에 따라 모서리 조건도 변화하였다. 이 결과들은 이전의 수치해석 결과와 일치한다.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.143-154
• /
• 2001

An algorithm for estimating the lane departure of a vehicle is derived and implemented based on an EDF(edge distribution function) obtained from gray-level images taken by a CCD camera mounted on a vehicle. As the function of edge direction, the EDF is aimed to show the distribution of edge direction and to estimate the possibility of lane departure with respect to its symmetric axis and local mamma. The EDF plays important roles: 1) It reduces noisy effects caused by dynamic road scene. 2) It makes possible lane identification without camera modeling. 3) It also leads LDW(lane departure warning) problem to a mathematical approach. When the situations of lane departure such that the vehicle approaches to lane marks or runs in the vicinity of the lane marks are occurred, the orientation of lane marks in images is changed, and then the situations are immediately reflected to the EDF. Accordingly, the lane departure is estimated by studying the shape of the EDF. The proposed EDF-based algorithm enhanced the adaptability to cope with the random and dynamic road environments, and eventually led to the reliable LDW system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.802-804
• /
• 2014

차선인식을 수행하기 위하여 영상의 에지검출은 필수적인 전처리 과정이다. 이러한 에지를 검출하기 위하여 여러 연구가 진행되고 있으며, 기존의 에지검출 방법에는 소벨(Sobel), 프리윗(Prewitt), 로버츠(Roberts) 방법 등이 있다. 이와 같은 방법들은 화소 분포 등에 관계 없이 전체 화소에 동일한 가중치를 적용하여 처리하므로 다소 미흡한 에지검출 결과를 나타낸다. 따라서 본 논문에서는 영상의 화소 분포 형태를 고려하여 차선인식에 적합한 가중치로 에지를 검출하는 알고리즘을 제안하였다.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.339-342
• /
• 2010

An iris image pattern positioning with preserved edge detector, ring zone and clock zone, frequency distribution and overlay matching is presented in this paper. Edge detector is required to be powerful and detail. That is proposed by overlaying Canny with LOG (CLOG). The two reference patterns are made from allocating each gray level on the clock zone and ring zone respectively. The normalized target image is overlaid with the clock zone reference pattern and the ring zone pattern to extract overlapped number, and make a matched frequency distribution to look through a symptom and position of human organ and tissue. The iterating experiments result in the ring and clock zone positioning evaluation.