• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.675-676
• /
• 2006

This paper shows the temperature rise of the high voltage GIS bus bar. The temperature rise in GIS bus bar is due to Joule's losses in the conductor and the induced eddy current in the tank. The power losses of a bus bar calculated from the magnetic field analysis are used as the input data for the thermal analysis to predict the temperature. The required analysis is a couple-field Multiphysics that accounts for the interactions between three-dimensional AC harmonic magnetic and fluid fields. The heat transfer calculation using the fluid analysis is done by considering the natural convection and the radiation from the tank to the atmosphere. Consequently, because temperature distributions by couple-field Multiphysics (coupled magnetic-fluid) have good agreement with results of temperature rise test, the proposed couple-field Multiphysics technique is likely to be used in a conduction design of the single-pole and three pole-encapsulated bus bar in CIS..

• 한국해안해양공학회지
• /
• 제6권3호
• /
• pp.234-244
• /
• 1994

2-방정식 난류모형을 이용하여 단순파에 의해 발생하는 연안류를 해석하였다. 난류운동에 관한 2-방정식으로 $ extsc{k}$-ι 보존식을 사용하여 계산된 유속분포 뿐 아니라 확산계수 분포도 비교하여 보았는데, 두 분포 모두 상당히 만족스러웠다. ι 보존식을 구성하는데 있어 몇 가지 항들은 난류운동과 관련되는 여러 변수들을 조합하여 경험식으로 만들어야 하는데 본고에서 ι 보존식에 사용되는 난류발생주파수로 새로운 형태를 제시하며, 제 경험상수들은 실험자료와 대비하여 추정하였다. 적용된 각 경험상수에 대하여 여러 수치를 적용하여 민감도분석을 실시하였으며, 여러 조건의 실험자료에 공통적으로 일치하는 상수를 추출하여 수치모형의 예측성을 높이고자 하였다.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.980-988
• /
• 2019

When compared with traditional power frequency generators, the frequency of a super high-speed permanent magnet generator (SHSPMG) is a lot higher. In order to study the influence of frequency on the electromagnetic field of SHSPMGs, a 60000rpm, 117kW SHSPMG was taken as a research object. The two-dimensional finite element model of the generator was established, and the two-dimensional transient field of the generator was simulated. In addition, a test platform of the generator was set up and tested. The reliability of the simulation was verified by comparing the experiment data with that of the simulation. Then the generator electromagnetic field under different frequencies was studied, and the influence mechanism of frequency on the generator electromagnetic field was revealed. The generator loss, voltage regulation rate, torque and torque ripple were analyzed under the rated active power load and different frequencies. The influences of frequency on the eddy current density, loss, voltage regulation rate and torque ripple of the generator were obtained. These conclusions can provide some reference for the design and optimization of SHSPMGs.

• Wind and Structures
• /
• 제28권2호
• /
• pp.99-110
• /
• 2019

Vortex-Induced-Vibration (VIV) is one kind of the wind-induced vibrations, which may occur in the construction and operation period of bridges. This phenomenon can bring negative effects to the traffic safety or can cause bridge fatigue damage and should be eliminated or controlled within safe amplitudes.In the current VIV studies, one available mitigation countermeasure, the horizontal flow-isolating plate, shows satisfactory performance particularly in PI shaped bridge deck type. Details of the wind tunnel test are firstly presented to give an overall description of this appendage and its control effect. Then, the computational-fluid-dynamics(CFD) method is introduced to investigate the control mechanism, using two-dimensional Large-Eddy-Simulation to reproduce the VIV process. The Reynolds number of the cases involved in this paper ranges from $1{\times}10^5$ to $3{\times}10^5$, using the width of bridge deck as reference length. A field-filter technique and detailed analysis on wall pressure are used to give an intuitive demonstration of the changes brought by the horizontal flow-isolating plate. Results show that this aerodynamic appendage is equally effective in suppressing vertical and torsional VIV, indicating inspiring application prospect in similar PI shaped bridge decks.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.827-838
• /
• 2023

Centrifugal pump is a key part of nuclear power plant systems, and its health status is critical to the safety and reliability of nuclear power plants. Therefore, fault diagnosis is required for centrifugal pump. Traditional fault diagnosis methods have difficulty extracting fault features from nonlinear and non-stationary signals, resulting in low diagnostic accuracy. In this paper, a new fault diagnosis method is proposed based on the improved particle swarm optimization (IPSO) algorithm-based variational modal decomposition (VMD) and relevance vector machine (RVM). Firstly, a simulation test bench for rotor faults is built, in which vibration displacement signals of the rotor are also collected by eddy current sensors. Then, the improved particle swarm algorithm is used to optimize the VMD to achieve adaptive decomposition of vibration displacement signals. Meanwhile, a screening criterion based on the minimum Kullback-Leibler (K-L) divergence value is established to extract the primary intrinsic modal function (IMF) component. Eventually, the factors are obtained from the primary IMF component to form a fault feature vector, and fault patterns are recognized using the RVM model. The results show that the extraction of the fault information and fault diagnosis classification have been improved, and the average accuracy could reach 97.87%.

• 센서학회지
• /
• 제9권6호
• /
• pp.404-415
• /
• 2000

본 논문에서는 산불에 의한 가공송전선의 열화에 대한 몇 가지 특성들과 비파괴 검사를 다룬다. 노화된 ACSR 도체에 대한 대기부식과 전해부식과 같은 부식기구를 설명한 후에 부식검출에 대해서 기술한다. 솔레노이드 코일의 임피던스 해석을 통하여 와류센서가 도체의 싱한 결함과 국부부식을 검사하는데 유용하게 사용될 수 있음을 확인하였다. 시험 도체를 코일 내부에 삽입한 경우에 센서코일의 임피던스가 변하므로, 산불에 의해 초래된 열화 정도를 측정하는 것이 가능하였다. 인공화염에 의해 열화 된 몇 개의 시료들을 사용하여 인장강도, 신장율과 센서 임피던스가 측정되었다. 화염 기간을 어느 정도 증가시키면, 알루미늄 소선의 인장은 현저하게 감소하기 시작하나 아연도금 강소선은 약간의 아연층이 부식되지만 인장은 초기와 유사하게 유지하였다. 일반적으로 도체의 인장하중이 감소하고 반대로 신장율이 증가하면 센서 임피던스는 감소하는 것을 알 수 있었다. 따라서, 센서의 출력은 도체의 기계적 특성 변화를 나타내므로 이 센서는 산등성이에 가설된 ACSR 도체에 대해 산불로 인한 열화상태를 검출하는데 이용할 수 있다. 결국, 산불에 의한 심한 열화상태에 대한 중요한 정보를 얻는데 솔레노이드 코일을 응용할 수 있다는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.213-224
• /
• 2008

The pumping of coolant in a liquid metal fast reactor may be performed with an annular linear induction electro-magnetic (EM) pump. Linear induction pumps use a traveling magnetic field wave created by poly-phase currents, and the induced currents and their associated magnetic field generate a Lorentz force, whose effect can be the pumping of the liquid metal. The flow behaviors in the pump are very complex, including a time-varying Lorentz force and pressure pulsation, because an induction EM pump has time-varying magnetic fields and the induced convective currents that originate from the flow of the liquid metal. These phenomena lead to an instability problem in the pump arising from the changes of the generated Lorentz forces along the pump's geometry. Therefore, a magneto-hydro-dynamics (MHD) analysis is required for the design and operation of a linear induction EM pump. We have developed a time-harmonic 2-dimensional axisymmetry MHD analysis method based on the Maxwell equations. This paper describes the analysis and numerical method for obtaining solutions for some MHD parameters in an induction EM pump. Experimental test results obtained from an induction EM pump of CLIP-150 at the STC "Sintez," D.V. Efremov Institute of Electro-physical Apparatus in St. Petersburg were used to validate the method. In addition, we investigated some characteristics of a linear induction EM pump, such as the effect of the convective current and the double supply frequency (DSF) pressure pulsation. This simple model overestimated the convective eddy current generated from the sodium flow in the pump channel; however, it had a similar tendency for the measured data of the pump performance through a comparison with the experimental data. Considering its simplicity, it could be a base model for designing an EM pump and for evaluating the MHD flow in an EM pump.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2508-2513
• /
• 2003

This paper presents a nuclear steam generator tube inspection/maintenance robot system. The robot assists in automatic non-destructive testing and the repair of nuclear steam generator tubes welded into a thick tube sheet that caps a hemispherical or quarter-sphere plenum which is a high-radiation area. For easy carriage and installation, the robot system consists of three separable parts: a manipulator, a water-chamber entering and leaving device for the manipulator and a manipulator base pose adjusting device. A software program to control and manage the robotic system has been developed on the NT based OS to increase the usability. The software program provides a robot installation function, a robot calibration function, a managing and arranging function for the eddy-current test, a real time 3-D graphic simulation function which offers remote reality to operators and so on. The image information acquired from the camera attached to the end-effecter is used to calibrate the end-effecter pose error and the time-delayed control algorithm is applied to calculate the optimal PID gain of the position controller. The developed robotic system has been tested in the Ulchin NPP type steam generator mockup in a laboratory.

• 비파괴검사학회지
• /
• 제20권4호
• /
• pp.285-289
• /
• 2000

본 연구는 콘크리트내의 철근의 굵기와 깊이를 동시에 측정할 수 있는 기술 개발에 관한 것이다. 개발된 탐촉자는 기존의 철근 탐지기와 다른 구조를 지니는데 감지 코일이 세 개로 구성되어 있다. 따라서 세 가지 신호를 동시에 측정하여 분석함으로써 철근의 굵기와 깊이를 분석하도록 되어 있다. 탐촉자 내 코일의 전압과 위상 변화를 임피던스 분석기를 이용하여 조사하고 그 전달함수의 괘적을 분석하였다. 여기 코일 내부에 장착된 감지 코일은 알려진 바와 같이 단순한 변화 형태를 나타내었으나 여기 코일 밖에 장착된 코일의 경우 변화 곡선이 복잡하였다. 실제 철근탐지 실험은 일반 와전류 탐상기를 이용하였는데 여러 가지 철근의 굵기와 깊이에 대하여 실험하였다. 철근 깊이에 따른 신호 변화는 임피던스 분석기에 의한 전달함수 변화에서 나타낸 것과 비슷한 경향을 나타내었으며 감지 코일마다 다른 전압의 변화를 이용하여 철근의 굵기와 깊이의 동시 측정이 가능하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.291-299
• /
• 2001

Recently, severe wear on the shutdown rod cladding of Ulchin Nuclear Power Plant #1, #2 were observed by the Eddy Current Test(E.C.T.). In particular, the wear at the sixth card location was up to 75%. The test results indicated that the Flow Induced Vibration(F.I.V.) might be the cause of the fretting wear resulting from the contact between Rod Cluster Control Assemblies(RCCAs) and their spacing cards(guide plates) arranged in the guide tube. From reviewing RCCAs fretting wear repots and analyzing the general characteristics of F.I.V. mechanism in the reactor, geometric layout and flow conditions around the control rod, it is concluded that the turbulence excitation is the most probable vibration mechanism of RCCA. To identify the governing mechanism of RCCA vibration, an experiment was performed for a representative rod position in which the most serious fretting wear experienced among the six rod positions. The experimental rig was designed and set up to satisfy the governing nondimensional numbers which are Reynolds number and mass damping parameter. The vibration amplitude measurement by the non-contact laser displacement sensor showed good agreements in the frequency and the maximum wearing(vibration) location with Ulchin E.C.T. results and Framatome report, respectively. The sudden increase in the vibration amplitude was sensed around the 6th guide plate with mass flow rate variation. Comparing the similitude rod behaviour with the idealized response of a cylinder in flow induced vibration, it was found that he dominant mechanism of vibration was transferred from turbulence excitation to periodic shedding at the mass flow ate 90ι/min. Also the critical velocity of the vibration in RCCAs was determined and the vibration can be prevented by reducing the bypass flow rate below the critical velocity.