• 품질경영학회지
• /
• 제32권1호
• /
• pp.92-101
• /
• 2004

Tris paper present an economic statistical design which have statistically constraints for the optimal design of an EWMA control charts with variable sampling interval. Cost function use that proposed by Lorenzen and Vance, and the optimal design parameters include the sample size, control limit width, sampling interval, EWMA weight value. Comparisons between VSI EWMA control charts optimal economic design and optimal economic statistical designs show the following fact. Although have demerits which are more costly than economic design, have merits which to detect shifts more efficiently and to improve statistical performance.

• International Journal of Quality Innovation
• /
• 제7권3호
• /
• pp.107-115
• /
• 2006

Control charts are important tools of statistical quality control. In 1956, Duncan first proposed the economic design of $\bar{x}-control$ charts to control normal process means and insure that the economic design control chart actually has a lower cost, compared with a Shewhart control chart. An moving average (MA) control chart is more effective than a Shewhart control chart in detecting small process shifts and is considered by some to be simpler to implement than the CUSUM. An economic design of MA control chart has also been proposed in 2005. The weaknesses to only the economic design are poor statistics because it dose not consider type I or type II errors and average time to signal when selecting design parameters for control chart. This paper provides a construction of an economic-statistical model to determine the optimal parameters of an MA control chart to improve economic design. A numerical example is employed to demonstrate the model's working and its sensitivity analysis is also provided.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.123-128
• /
• 2010

This article investigates economic-statistical design of VSI(variable samling interval) charts considering Various Runs Rules. Most recent adaptive control charts are conplex designs. Actually It's not easy to operating control quality process. We propose a procedure for designing VSI Runs charts, based on Lorenzen and Vence's model. The optimal design parameters of the charts can be determined by minimizing the cost model. And computational experiments show that the VSI Runs Rules charts is superior to the FSSI Runs Rules charts in the economic-statistical characterisitics.

• 대한산업공학회지
• /
• 제34권3호
• /
• pp.328-336
• /
• 2008

This research proposes a method for economic-statistical design of adaptive moving average (A-MA) charts. The basic idea of the A-MA chart is to accumulate previous samples selectively in order to increase the sensitivity. The A-MA chart is a kind of adaptive chart such as the variable sampling size (VSS) chart. A major advantage of the A-MA chart over the VSS chart is that it is easy to maintain rational subgroups by using the fixed sampling size. A steady state cost rate function is constructed based on Lorenzen and Vance (1986) model. The cost rate function is optimized with respect to five design parameters. Computational experiments show that the A-MA chart is superior to the VSS chart as well as to the Shewhart $\bar{X}$ chart in the economic-statistical sense.

• 산업경영시스템학회지
• /
• 제27권2호
• /
• pp.114-122
• /
• 2004

In statistical process control applications, variable sample size (VSS) $\bar{X}$ chart is often used to detect the assignable cause quickly. However, it is usually assumed that only one assignable cause results in the out-of-control in the process. In this paper, we propose the algorithm to minimize the function of cost per unit time and compare the economic design and the statistical design by use of the value of cost per unit time. We consider double assignable causes to occur with compound in the process and adopt the Markov chain approach to investigate the statistical properties of VSS $\bar{X}$ chart. A procedure that can calculate the control chart's parameters is proposed by the economic design.

• 응용통계연구
• /
• 제9권1호
• /
• pp.91-109
• /
• 1996

지수가중이동평균관리도는 최근 들어 공정검색과 공정수정에 널리 이용되고 있으나 모수의 설정에 관한 연구는 많지 않다. 관리도의 설계는 통계적 설계와 경제적 설계로 분류한다. 통계적 설계는 허용된 제1종 오류하에서 제2종 오류를 최소화하는데 반해 경제적 설계는 공정에서 발생하는 모든 가능한 비용을 고려한 비용함수를 최소화한다. 이 논문에서는 지수가중이동평균관리도의 통계적 설계와 함께 경제적 설계를 정의한 다음 각 설계에서의 최적모수를 선정하여 결과를 비교한다. 경제적 설계에서 설정된 최적모수는 통계적 설계와 다르게 나타남을 알 수 있고 특히 가중치의 값은 통계적 설계에서 보다 항상 큰 값으로 나타난다. 경제적 설계에서는 고려하는 이상원인의 수에 따라 단일이상원인과 다중이상원인 모형으로 구분하여 설계한다. 다중이상원인의 평균적 개념으로 적용되는 단일이상원인 모형에서는 실제 다중이상원인이 존재할 때에 잘못된 판단을 할 수 있음을 보이고 있다.

• 품질경영학회지
• /
• 제37권1호
• /
• pp.29-39
• /
• 2009

This article investigates economic-statistical design of VSSI(variable sampling size and interval) cause-selecting charts considering two assignable causes. We consider a process which is composed of two dependent sub-processes. In each sub-process, two kinds of assignable cause may exist. We propose a procedure for designing VSSI cause-selecting charts, based on Lorenzen and Vance model. Computational experiments show that the VSSI cause-selecting chart is superior to the FSSI cause-selecting chart in the economic-statistical characteristics, even under two assignable causes.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.87-98
• /
• 2005

This research investigates economic-statistical characteristics of variable sampling size and interval (VSSI)$\bar{X}$charts under two assignable causes. A Markov chain approach is employed in order to calculate average run length (ARL) and average time to signal (ATS). Six transient states are derived by carefully defining the state. A steady state cost rate function is constructed based on Lorenzen and Vance(1986) model. The cost rate function is optimized with respect to six design parameters for designing the VSSI $\bar{X}$ charts. Computational experiments show that the VSSI $\bar{X}$ chart is superior to the Shewhart $\bar{X}$ chart in the economic-statistical sense, even under two assignable causes. A comparative study shows that the cost rate may increase up to almost 30% by overlooking the second cause. Critical input parameters are also derived from a sensitivity study and a few guideline graphs are provided for determining the design parameters.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.471-488
• /
• 2015

Purpose: Double sampling $T^2$ chart is a useful tool for detecting a relatively small shift in process mean when the process is controlled by multiple variables. This paper finds the optimal design of the double sampling $T^2$ chart in both economical and statistical sense under Weibull failure model. Methods: The expected cost function is mathematically derived using recursive equation approach. The optimal designs are found using a genetic algorithm for numerical examples and compared to those of single sampling $T^2$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the single sampling $T^2$ chart in terms of the expected cost per unit time and Type-I error rate for all the numerical examples considered. Conclusion: Double sampling $T^2$ chart can be designed to satisfy both economic and statistical requirements under Weibull failure model and the resulting design is better than the single sampling counterpart.

• 품질경영학회지
• /
• 제35권2호
• /
• pp.37-44
• /
• 2007

Today, the statistical process control (SPC) in manufacture environment is an important role at the process by the productivity improvement of the manufacturing systems. The control chart in this statistical method is widely used as an important statistical tool to find the assignable cause that provoke the change of the process parameters such as the mean of interest or standard deviation. But the traditional SPC don't grasp the change of process according to the points fallen the near control limits because of monitoring the variance of process such as the fixed sampling interval and the sample size and handle the cost of the aspect of these sample point. The control chart can be divided into the statistical and economic design. Generally, the economic design considers the cost that maintains the quality level of process. But it is necessary to consider the cost of the process improvement by the learning effects. This study does the economic design in the VSI $\bar X$ control chart and added the concept of loss function of Taguchi in the cost model. Also, we preyed that the VSI $\bar X$ control chart is better than the FSI $\bar X$ in terms of the economic aspects and proposed the standard of the process improvement using the VSI $\bar X$ control chart.