• Title/Summary/Keyword: eccentric

Search Result 893, Processing Time 0.027 seconds

EFFECT OF INTAKE PORT GEOMETRY ON THE IN-CYLINDER FLOW CHARACTERISTICS IN A HIGH SPEED D.I. DIESEL ENGINE

  • LEE K. H.;RYU I. D.;LEE C. S.;REITZ R. D.
    • International Journal of Automotive Technology
    • /
    • 제6권1호
    • /
    • pp.1-8
    • /
    • 2005
  • Recently, the HSDI (High Speed Direct Injection) diesel engine has been spotlighted as a next generation engine because it has a good potential for high thermal efficiency and fuel economy. This study was carried out to investigate the in-cylinder flow characteristics generated in a HSDI diesel engine with a 4-valve type cylinder head. The four kinds of cylinder head were manufactured to elucidate the effect of intake port geometry on the in-cylinder flow characteristics. The steady flow characteristics such as coefficient of flow rate $(C_{f})$, swirl ratio (Rs), and mass flow rate (m,) were measured by the steady flow test rig and the unsteady flow velocity within a cylinder was measured by PIV. In addition, the in-cylinder flow patterns were visualized by the visualization experiment and these results were compared with simulation results calculated by the commercial CFD code. The steady flow test results indicated that the mass flow rate of the cylinder head with a short distance between the two intake ports is $13\%$ more than that of the other head. However, the non-dimensional swirl ratio is decreased by approximately $15\%$. As a result of in-cylinder flow characteristics obtained by PIV and CFD calculation, we found that the swirl center was eccentric from the cylinder center and the position of swirl center was changed with crank angle. As the piston moves to near the TDC, the swirl center corresponded to the cylinder center and the velocity distribution became uniform. In addition, the results of the calculation are in good agreement with the experimental results.

말티즈 견에서 발생한 원발성 폐동맥 고혈압증 (Primary Pulmonary Hypertension in a Maltese Dog)

  • 문형선;이승곤;최란;박인철;현창백
    • 한국임상수의학회지
    • /
    • 제24권4호
    • /
    • pp.613-617
    • /
    • 2007
  • 중성화된 1년령 말티즈 개(2.4kg)가 간헐적인 기침, 호흡곤란, 운동 불내성을 주요 증상으로 내원하였다. 신체검사 시 제 2음 모순 분열, 확장기 역류성 잡음이 관찰되었으며, 심장초음파에서 주폐동맥의 확장, 심실 중격 비대를 동반한 우심실 편심성 비대, 심각한 삼첨판 역류증과 폐동맥 역류증(5.4m/sec, 3.4m/sec)이 관찰되었다. 이러한 진단 검사 결과를 바탕으로, 본 증례를 선천성 심장 내 단락, 폐쇄성 폐질환, 그리고 우심계의 압력 과부하 또는 폐혈관계과관류와 관련된 전신질환과 감별하여 원발성 폐동맥 고혈압증으로 잠정진단 하였다. 환자는 furosemide와 aspirin을 투여하여, 산소요법을 실시하였다. 본 증례는 드물게 발생하는 개의 원발성 폐동맥 고혈압이다.

개량형 점하중강도시험기의 개발 (Development of an Improved Point Load Apparatus)

  • 김용필;엄정기
    • 터널과지하공간
    • /
    • 제19권6호
    • /
    • pp.473-478
    • /
    • 2009
  • 기존의 점하중시험기는 재하점간 중심축의 일치성에서 문제가 발생하는 경우가 존재하며 압력게이지를 통해서 시료에 가해지는 하중을 산정하기 때문에 정확성이 결여될 수 있는 단점이 있다. 본 연구는 원추판을 저항판과 함께 밀어 올리는 방식을 사용하고 지지 연마봉에 선형베어링을 장착하여 연속적으로 반복되는 시험에도 재하점의 축간 편심오차를 0.1 mm 이하로 유지한 개량형 점하중시험기를 개발하였다. 또한 반복되는 시험에서 재하점간의 거리를 자동으로 측정하고 편심오차를 확인하기 위하여 두 개의 디지털게이지를 부착하였다. 상부 원추판 끝단에 장착한 로드셀은 시료에 가해지는 순수 하중을 측정하여 압력계 방식인 기존의 점하중시험기가 가지는 단점을 보완하였다. 개발된 개량형 점하중시험기는 화성암, 편마암, 셰일에서 선택된 표준 코어시료에 대하여 총 107회의 점하중강도시험을 수행하고 품질과 성능이 검증되었다.

지연성근육통 예방을 위한 준비운동과 정리운동이 통증과 근활성도에 미치는 효과 (Effects of Warm-up and Cool-down Exercises for Preventing Delayed Onset Muscle Soreness on Pain and Muscle Activation)

  • 오덕원
    • 한국전문물리치료학회지
    • /
    • 제20권1호
    • /
    • pp.28-35
    • /
    • 2013
  • The purpose of this study was to determine the effects of warm-up and cool-down exercises on pain and muscle activation of delayed onset muscle soreness after intense exercise. Delayed onset muscle soreness was caused by the eccentric exercise in the elbow flexor muscle of the non-dominant upper limb. Forty-four subjects volunteered to participate in this study and were randomly assigned to one of the following groups: warm-up and cool-down group, only warm-up group, only cool-down group, or control group with no intervention. The level of perceived pain using the visual analogue scale and electromyographic activation change in maximal voluntary isometric contraction were measured 4 times at the following times: 10 min, 24 hr, 48 hr, and 72 hr after the exercise. The results revealed the main effect between the groups and interaction effect between the group and measurement session (p<.05). The warm-up and cool-down group showed most favorable results with respect to reduced perceived pain level and increased muscle strength in most measurement sessions, and the only warm-up group showed significantly more decreased pain level than the control group at 24 hr and 48 hr and more increased muscle activation than the cool-down group at 48 hr (p<.05). However, there were no significant differences in pain level and muscle activation between the only cool-down group and control group at all measurement sessions (p>.05). The findings suggest that the warm-up exercise performed before an intense exercise had beneficial effects on the symptoms of delayed onset muscle soreness, whereas cool-down exercise performed after the intense exercise did not.

고관절근력강화운동이 뇌졸중환자의 기능증진에 미치는 효과 (Effects of Resistance Strengthening Exercise for the Hip Flexor and Extensor on Functional Improvement in Chronic Stroke Patients)

  • 강권영;이완희
    • 한국전문물리치료학회지
    • /
    • 제13권3호
    • /
    • pp.10-17
    • /
    • 2006
  • The purpose of this study was to determine the consequence of resistance strengthening exercise on the hip flexor and extensor performed to improve functional mobility in stroke patients more than six months post stroke. Seventeen patients were randomized into two groups. Both groups received conventional physical therapy for six weeks. In addition, the experimental group performed eccentric resistance strengthening exercise in the hip flexor and extensor using an isokinetic dynamometer. The hip flexor and extensor strength, stair up and down mobility, timed get up and go (TUG), 10 m gait velocity, and functional reach were repeatedly measured at baseline, three weeks, and six weeks after treatment. The results were as follows: 1. The experimental group improved more remarkably in the hip flexor and extensor strength, stair up and down mobility, and the 10 m gait velocity after three weeks and six weeks of treatment (p<.05), 2. The control group improved significantly in the hip flexor and extensor strength, and 10 m gait velocity after three weeks of treatment (p<.05), 3. At each three and six week point, the experimental group made greater gains in hip flexor and extensor strength, stair up and down mobility, and 10 m gait velocity than the control group (p<.05). In conclusion, it is desirable to perform resistance strengthening exercises combined with conventional physical therapy to improve functional mobility in chronic stroke patients.

  • PDF

콘크리트피복 원형충전강관 기둥의 압축성능 (Axial Load Performance of Circular CFT Columns with Concrete Encasement)

  • 이호준;박홍근;최인락
    • 한국강구조학회 논문집
    • /
    • 제27권6호
    • /
    • pp.525-536
    • /
    • 2015
  • 콘크리트피복 충전강관의 휨-압축 성능을 평가하기 위한 편심압축실험을 수행하였다. 기둥 주철근의 국부좌굴을 구속하고 콘크리트피복의 조기파괴를 방지하기 위하여 U형 띠철근 상세를 제안하였다. 주요 실험변수는 축하중 편심거리, 띠철근 간격, 그리고 콘크리트피복 여부이다. 실험결과 얇은 콘크리트피복에 수직균열이 조기에 발생하였지만 실험체의 최대강도는 콘크리트 피복의 기여도를 고려한 예측강도를 만족하였다. 또한, 내부 원형강관으로 인하여 제안된 콘크리트피복 충전강관은 우수한 변형능력을 나타냈다. 실험체의 휨-압축 강도 및 휨강성을 현행 설계기준과 비교하여 분석하였다.

래티스를 이용한 철근콘크리트 무량판 구조의 슬래브-기둥 접합부 전단보강 공법 개발 (Development and Application of Lattice Shear Reinforcement for Flat Plate Slab-column Connection)

  • 강수민;박성우;방중석;이도범;권철환;박홍근
    • 한국건축시공학회지
    • /
    • 제13권5호
    • /
    • pp.482-490
    • /
    • 2013
  • 무량판 슬래브 구조는 시공의 단순함과 낮은 층고, 그리고 다양한 평면구성의 용이함으로 인하여 구조적으로 효과적이나 슬래브-기둥 접합부가 중력하중에 의한 펀칭전단파괴와 횡하중의 불균형모멘트에 의한 편심전단파괴에 취약한 단점이 있다. 이러한 무량판 슬래브의 취약점을 방지하기 위하여 많은 보강공법들이 개발되었으나, 보강공법들은 구조적 성능과 경제성, 그리고 시공성을 모두 만족시키기지는 못하고 있다. 이 논문에서는 래티스를 이용한 무량판 구조의 슬래브-기둥 접합부 보강공법을 제시하였다. 주기하중 실험을 통하여 래티스 보강공법의 구조적 성능을 증명하였으며 같은 구조설계 조건에 대하여 스터럽과 스터드레일, 그리고 래티스를 이용한 공법을 적용해 봄으로써 경제성을 입증하였다.

고속 직접분사식 디젤 엔진의 실린더내 유동 해석 (Analysis of In-Cylinder Flow Characteristics of a High Speed D.I. Diesel Engines)

  • 박상찬;류재덕;이기형
    • 대한기계학회논문집B
    • /
    • 제26권9호
    • /
    • pp.1276-1283
    • /
    • 2002
  • Recently, HSDI (High Speed Direct Injection) diesel engine has been spotlighted as a next generation engine because it has a good potential for high thermal efficiency and fuel economy. This study was carried out to investigate the in-cylinder flow characteristics generated in a 4-valve small diesel cylinder head with a tangential and helical intake port. The flow characteristics such as coefficient of flow rate(Cf), swirl ratio (Rs), and mass flow rate (ms) were measured in the steady flow test rig using the impulse swirl meter and the analysis of in-cylinder flow field was conducted by experiment using the PIV and calculation using the commercial CFD code. As the results from steady flow test indicate, the mass flow rate of the cylinder head with a short distance between the two intake ports is increased over 13% than that of the other head. However, the non-dimensional swirl ratio is decreased approximately 15%. From in-cylinder flow characteristics obtained by PIV and CFD calculation, we found that the swirl center was eccentric from the cylinder center and the velocity distribution became uniform near the TDC. In addition, the results of the calculation are good agreement with the experimental results.

탄성받침을 가지는 단경간 곡선 강박스거더 교량의 부반력 특성평가 (Evaluation of Characteristics on Negative Reactions of Simply Supported Curved Box Girder Bridges with Elastomeric Bearings)

  • 김경식;이희정
    • 한국전산구조공학회논문집
    • /
    • 제28권2호
    • /
    • pp.161-168
    • /
    • 2015
  • 평면내 곡선교량은 편심하중뿐만 아니라 자중만으로도 비틀림하중을 받게 되고, 이는 지점부 부반력 발생의 원인이 된다. 본 논문에서는 경간장 48.8m를 가지는 단경간 곡선강박스 거더교량에 대해 내부곡률각도를 0.49~1.35rad으로 조정하면서 곡률효과에 따라 지점에서 발생하는 수직반력을 분석하였다. 부반력 발생가능성을 고려하여 반력 크기 및 방향을 예측하기 위해 곡선교량 상부구조를 각 독립된 요소로 분리하여 반력산정식을 해석적으로 개발하였다. 콘크리트 바닥판 및 강재 하부플랜지는 각각 면의 차원을 가지는 기학학적 환형섹터로, 수평면내에서 폭이 좁게 투영되어 나타나는 상부플랜지 및 복부판은 선의 차원을 가지는 기하학적 호로 가정되었다. 제안된 반력산정식의 형식은 비교적 단순하고 그 예측값은 유한요소해석으로 얻은 값과 비교하였을 때 오차가 1% 수준으로 잘 일치하였다.

확공비트의 기술동향 및 특허분석 (Technical Trends and Patent Analysis for Reaming Bits)

  • 민경남;정찬묵;김계웅
    • 지질공학
    • /
    • 제23권2호
    • /
    • pp.127-136
    • /
    • 2013
  • 본 연구에서는 확공비트에 대한 향후 연구개발 방향을 설정하기 위하여 전체 굴착비트에 대한 한국, 미국, 일본 및 유럽에서의 출원 공개/등록된 특허를 중심으로 특허 동향을 분석하였다. 굴착비트를 대상으로 1차적으로 굴착기능에 따라 확공구조와 고정구조로 분류하고, 2차적으로 굴착방식에 따라 슬라이딩 구조, 컨센트릭 구조 등 7가지로 분류하였다. 특허 검색 결과 총 33,614개가 검색되었으며 중복제거 및 필터링을 통하여 870건의 유효 분석대상 특허를 선별하였다. 특허건수와 출원인수의 상관관계를 이용한 포트폴리오 분석 결과 성장가능성이 가장 높다고 판단되는 슬라이딩구조를 핵심기술로 선정하였으며 이에 대한 특허장벽 분석을 통하여 핵심기술과 유사성이 높은 특허가 있을 경우 회피설계 및 타기술과 차별화된 기술 개발할 수 있는 기초자료를 제시하였다.