• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.394-400
• /
• 2007

This thesis aims the development of power supply for the BTS of Mobile Telecommunication system. Specially, it receives AC power and it can be possible both supply the uninterrupted and stabile DC Power to BTS and simultaneously maintain full charging the back-up battery that is used in case failing AC power supply. In addition, easy maintenance is also the main purpose of it regardless of front and left side except rear side. In these days, it needs more small size power supply system in order to comply with the user needs regarding more easy maintenance and more less space as become smaller main telecommunication systems. This system can be installed close to wall and support more easy maintenance and it was considered easy expansion in case when it needs.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.283-289
• /
• 2004

According to continuos welded rails on a bridge, temperature changes bring about the expansion of the bridge deck adding axil forces on the track. Moreover, the ballast on the bridge deck expansion joint is moved due to the bridge deck. If bridge decks are longer, the influence is greater, loosening ballast, causing track irregularities, and deteriorating passengers' comfort. Considering structure of bridge itself and tolerance of track irregularities caused by the loosened ballast on bridges, the maximum length of a deck should be less than 80m, which is the same as the standard of the French railway. In this study, an interaction between the expansion related to the bridge length and irregularity in longitudinal level referring to measurements and maintenance works performed in the high-speed railways was analyzed. This research shows that installation of sliding plate or vertical ballast stopper is not a good option since it is difficult to install. On the other hand, installation of movable fastener or gluing is easy but its influence is insignificant. To conclude, switch tie tamping or manual tamping is more effective than others.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.580-583
• /
• 2009

It is very important to minimize the maintenance cost on easy accessibility in the production information system, change of production process line, and system expansion for globalization of logistics and production in the steel and manufacturing. In this paper, we design applying design patterns of object-oriented as well as implement web-based integrated manufacturing management system using JSP for easy accessibility of users and reduction of maintenance cost on business expansion and system integration. In addition, The proposed MES system supports various functionality such as equipment master code management, equipment management, inspection management, repair management, failure management, and statistic management in detail.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.203-217
• /
• 2009

The researches on the development of composite material propeller with outstanding damping effects have been actively attempted for the reduction of radiation noise of underwater vehicle propeller. Composite material suitable for the flexible propeller has the following advantages, such as high specific strength and specific stiffness, low thermal expansion coefficient, high resistance against environmental deterioration, low possibility of corrosion due to cavitation, nonoccurrence of rapid fracture due to fatigue, easy molding of complicated shape, easy repair maintenance and low production costs, etc. For the confirmation of optimal fiber array structures of composite material for the production of the flexible propeller blades, in this study, mechanical characteristics of its specimens according to materials were obtained and structural characteristics of propeller blade were also examined according to materials and stacking fiber arrays.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2009

The differential settlement may be generated by the variation of stresses caused by the soft ground or ground water. The cracks are usually created when the structures are leaned or deformed due to the differential settlement. A grouting method has been mainly used till now to improve the bearing capacity of the ground when the foundation of the structure is deformed by differential settlements. However, when this method is used, it takes too long time to obtain the required strength and the period of the reinforcement effect is not long enough. The advantage of GPCON injection method is to have good mechanical properties and durability, and easy construction. In addition, the GPCON method rapidly fills up the void in soils by injecting some materials into underground and also obtain the increase of bearing and shearing forces due to the expansion. In this paper the restoration capability of the foundation settlement of railway and subway subjected to cyclic loading is analytically and experimentally evaluated using the high density rapidly expansion GPCON in order to investigate the types of deformations and vibrational characteristics.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.673-679
• /
• 2005

According to continuous welded rails on a bridge, temperature changes bring about the expansion of the bridge deck,adding axial forces on the track. Moreover, the ballast on the bridge deck expansion joint is moved due to the bridge deck. The longer the bridge deck is, the greater the influence will be, loosening the ballast, causing track irregularities, and deteriorating passenger comfort. Considering the structure of the bridge itself and tolerance for track irregularities caused by the loosened ballast on the bridge, the maximum length of the deck should be less than 80 m, which is the same as the standard of French railways. In this study, the interaction between the expansion related to the bridge length and the irregularity in the longitudinal level, referring to measurements and maintenance work performed in high-speed railways, was analyzed. This research shows that the installation of a sliding plate or a vertical ballast stopper is not a good option, since it is difficult. On the other hand, the installation of a ZLR fastener or gluing is easy, but its influence is insignificant. In conclusion, switch tie tamping or manual tamping is more effective than other methods of what?

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.7
• /
• pp.398-405
• /
• 2013

Small and medium-size buildings employ a multi-distributed individual air-conditioning system that utilizes package air conditioners instead of centralized cooling systems, which can allow easier building management and maintenance, along with a diversification of facility use. Inverter driven system heat pumps have been developed to achieve not only an easy distribution control, allowing free combination of indoor units with different models and different capacities, but also wide applications to intelligent air conditioning. However, the control algorithms of the system heat pump are limited in the open literature, due to complicated operating conditions. In this paper, an inverter-driven system heat pump having two indoor units with electronic expansion valves (EEV) was simulated in the cooling mode. An integral optimum regulating controller employing the state space control method was also simulated, and applied to the system-heat pump system, to obtain efficient control of the MIMO (multi input multi output) system. The simulation model for the controller yielded satisfactory prediction results. The new control model can be successfully utilized as a basic tool in controller design.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.177-186
• /
• 2021

This paper aims to show that cooperative robots, which have only been used in manufacturing sites, are expanding their scope of use in daily living spaces due to the expansion of non-face-to-face services. By combining robots and IoT technologies in terms of diversifying services in daily life and customized service areas, it is expected that the general public will also have easy access to smart technologies, and these technologies will be used in more areas. The robot barista system will provide customers with the services they want, monitoring, maintenance, and management of the system, making this paper convenient for customers, as well as managers who run stores, maintenance and repair, and engineers who design the system. This paper attempts to demonstrate this through a structure called Robopresso.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.55-66
• /
• 2017

Korean small and medium sized software companies have tried to export their solutions or services to overseas markets. In 2016, exports of the software industry increased by 6.0% from the previous year, and the value added of the industry was 2.2 times higher than that of the manufacturing industry. From a long-term perspective, it is important to secure a global competitive advantage in order to sustain the export high value-added of the software industry. The obstacles to entry into the overseas market of small to medium enterprises are as follows: first, difficulty in product development and localization of marketing; second, lack of investment for overseas expansion; and finally, competitiveness of software technology. In particular, To overcome such obstacles, Korean small and medium sized software companies should increase the technical perfection and secure software export competitiveness. The paper presents a payment settlement framework enabling adaptive reuse and semiautomatic development of global payment settlement services. The quantitative and qualitative evaluation results are presented with domestic and overseas case studies as follows: Firstly, semi-automatic development is realized successfully by applying the framework. Secondly, it is possible to maintain consistent quality of software and to deliver maintenance services without relying on the internal human resources. Thirdly, it is possible to reduce the project duration of the same development cope to less than 50% by applying the framework. Finally, because it is based on BPMN 2.0, which is a high level design diagram, it is expected that it will be easy to implement through components connection and reduce difficulties in technology transfer and localization. Also, at the time of runtime operation, it will be effective to understand the design idea easily and to carry out additional developments without human resource who participated in the initial project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.1
• /
• pp.45-56
• /
• 2022

Recently, bicycle sharing system is introduced and the usage of shared bicycles is increasing in Suwon city. Despite the need to expand the bicycle road infrastructure, this is not the case. Therefore, this research attempts to propose a method for bicycle lane installation in Suwon city. For this, this research conducted location analysis based on the shared bicycle usage data and trip inducing facility data. Using location analysis results, appropriate routes for bicycle lanes are selected. As a result, two routes are selected. These routes have advantages that it is easy to connect with the existing bicycle roads or traffic inducing facilities and to install using the existing bicycle roads. However, these routes also have disadvantage that traffic congestion may occur due to the occupancy of the existing road space. It is expected that this research may contribute to expansion and maintenance of bicycle lane infrastructure, the bicycle and PM sharing service usage, implementation of sustainable urban transportation systems in Suwon city.