• Journal of the Korean Society of Costume
• /
• v.47
• /
• pp.61-72
• /
• 1999

For the establishment of ready made Hanbok for the people in their 20's this study aims to develope Bagi-chogori pattern that revives the esthetic quality of the traditional Hanbok as well as comfortably fit the body. Direct method was used in Measuring the 33 parts of men which was selected as items needed for the analysis of the body and the development of patterns. In accordance with the body measurement and the analysis of the result the bust girth and height which has interrelation was chosen as the standard size for the development of pattern. Men's Baji-chogori(Korean traditional Jacket and Pants) which doesn't request fitness for instance we drew out a cross table by giving 5cm intervals each for breast waist hip girth and height. Size system of Baji-chogori was 4 steps. 1st was bust 95cm height 165cm 2nd was bust girth 95cm height 170cm 3rd was bust girth 100cm height 175cm and the 4th was bust girth 105cm height 180cm. In the case of Men the grouping of bodies was attempted by concentrating on the difference of the drop amount(Bust girth to hip girth), However 90% of men in their 20's showed a silhouette of an inverted triangle. Therefore attempt for an additional grouping wasn's Only calculation concerning the ease amount of items such as bust which and length was considered to enhance the silhouette of Hanbok when worn. Men's body for instance have a tendency to change to a rectangular shape as they get older. specially the abdominal girth trend to increase greatly. So study and development of pattern should be made for all age groups.

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.339-345
• /
• 2014

This study was performed to develop a rapid immuno-assay kit, by using a specific antigen to detect Hanwoo brand meat. We selected a synthetic antigen specific to our target antibody, named BIO-TAG (Tyr-D-Ala-Phe), by utilizing a computer-based analysis and literature review. BIO-TAG tagged with adjuvant was subcutaneously injected in sheep and Hanwoo. The serum and meat juice of the immunized or non-immunized animal were then analyzed, to measure the titer of antibody by ELISA and Western blot. The amount of antibodies against the BIO-TAG increased (p<0.05) in serum by vaccination. Furthermore, meat juice from the immunized Hanwoo showed greater (p<0.05) antibody titer, compared with those from non-immunized groups. To optimze the dilution factor, we performed dot-ELISA, with various combination levels of BIO-TAG. Results from dot-ELISA showed that 2 mg/mL BIO-TAG was sufficient to distinguish the immunized meat from non-immunized groups. These results support our hypothesis that simple immunization of Hanwoo generates a sufficient amount of antibodies to be detectable in the meat juice by means of the immune-assay. Therefore, specific Hanwoo brand meat can be more precisely identified by our rapid diagnostic kit. This technology can deter possible fraud of counterfeit meat brands in the Korean domestic market with ease and rapidity; and offers a new tool that guarantees consumers high quality Hanwoo brand beef.

• The Research Journal of the Costume Culture
• /
• v.22 no.6
• /
• pp.911-929
• /
• 2014

This study is designed to analyze the similarity of fit and appearance between 3D virtual torso length sloper with real torso length sloper according to three 3D virtual clothing simulation programs (Optitex, CLO 3D, i-Designer), three body types (A, N, H) and fit status. We selected three representative body type models of females aged 20~30 and got their direct body measurements. Using these body measurements, we developed three 3D avatar body models and made three torso length fitted sloper with long sleeves. Thirty expert fit judges consisting of technical designers and graduate students assessed the similarity of fit and appearance between 3D virtual clothing and real clothing by observing images classified into front, back and side scene. We conducted ANOVA and post-hoc analyses to compare fit and appearance between real clothing and virtual clothing depending on three program. The results showed that CLO 3D represented fit and silhouette most similarly among the programs, especially girths, width and length. i-Designer tended to be relatively good to represent stress fold amount and silhouette. Optitex was assessed relatively better in expressing ease amounts in torso girths and armscye girths, but relatively worse for width, length, stress fold amount and silhouette.

• Journal of KIISE
• /
• v.43 no.1
• /
• pp.47-53
• /
• 2016

While the Internet develops rapidly, a huge amount of image data collected from smart phones, digital cameras and black boxes are being shared through social media sites. Generally, social images are handled by tagging them with information. Due to the ease of sharing multimedia and the explosive increase in the amount of tag information, it may be considered too much hassle by some users to put the tags on images. Image retrieval is likely to be less accurate when tags are absent or mislabeled. In this paper, we suggest a method of extracting tags from social images by using image content. In this method, CNN(Convolutional Neural Network) is trained using ImageNet images with labels in the training set, and it extracts labels from instagram images. We use the extracted labels for automatic image tagging. The experimental results show that the accuracy is higher than that of instagram retrievals.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.100-108
• /
• 2022

Among various industries, the textile industry uses the largest amount of water for coloring textiles which leads to a large amount of wastewater containing various kinds of dye. There are various methods for the removal of dye such as flocculation, ozone treatment, adsorption, etc. But these processes are not much successful due to the issue of recycling which enhances the cost. Alternatively, the membrane separation process for the treatment of dye in wastewater is already documented as the best available technique. Polymeric membrane and ceramic membrane are two separate groups of separation membranes. Advantages of ceramic membranes include the ease of cleaning, long lifetime, good chemical and thermal resistance, and mechanical stability. Ceramic membranes can be prepared from various sources and natural materials like clay, zeolite, and fly ash are very cheap and easily available. In this review separation of wastewater is classified into mainly three groups: ultrafiltration (UF), microfiltration (MF), and nanofiltration (NF) process.

• Structural Engineering and Mechanics
• /
• v.87 no.2
• /
• pp.151-164
• /
• 2023

The latest earthquake's costly repairs and economic disruption were brought on by excessive residual drift. Self-centering systems are one of the most efficient ways in the current generation of seismic resistance system to get rid of and reduce residual drift. The mechanics and behavior of the self-centering system in response to seismic forces were impacted by a number of important factors. The amount of post-tensioning (PT) force, which is often employed for the standing posture after an earthquake, is the first important component. The energy dissipater element is another one that has a significant impact on how the self-centering system behaves. Using the damper as a replaceable and affordable tool and fuse in self-centering frames has been recommended to boost energy absorption and dampening of structural systems during earthquakes. In this research, the self-centering steel moment frame connections are equipped with cushion flexural dampers (CFDs) as an energy dissipator system to increase energy absorption, post-yielding stiffness, and ease replacement after an earthquake. Also, it has been carefully considered how to reduce permanent deformations in the self-centering steel moment frames exposed to seismic loads while maintaining adequate stiffness, strength, and ductility. After confirming the FE model's findings with an earlier experimental PT connection, the behavior of the self-centering connection using CFD has been surveyed in this study. The FE modeling takes into account strands preloading as well as geometric and material nonlinearities. In addition to contact and sliding phenomena, gap opening and closing actions are included in the models. According to the findings, self-centering moment-resisting frames (SF-MRF) combined with CFD enhance post-yielding stiffness and energy absorption with the least amount of permeant deformation in a certain CFD thickness. The obtained findings demonstrate that the effective energy dissipation ratio (β), is increased to 0.25% while also lowering the residual drift to less than 0.5%. Also, this enhancement in the self-centering connection with CFD's seismic performance was attained with a respectable moment capacity to beam plastic moment capacity ratio.

• The Journal of Korea Robotics Society
• /
• v.3 no.4
• /
• pp.345-350
• /
• 2008

This study aims to propose the concept design of oil spill protection robot which can rapidly intervene to control the oil spillage situation at the sea. Taking into account the fact that a huge amount of oil is transported trans-continentally by oil tanker, none of industrialized countries are completely safe from the marine oil spill which results in social, economical and ecological damages to their communities. The employment of double hull-oil tanker, pipe line transporting can be most safe way. Yet complete prevention of oil spill is probably not realistic. Accordingly the alternative solution to control marine oil spill and minimize the damages caused by the incident using intelligent robot technology based on swarm control method is proposed. The main features of oil spill protection(OSP) robot is explained via following three perspectives. Firstly, from functional point of view, OSP robot system safely and efficiently replaces oil boom installation manually conducted by human workers with intelligent robot technology based on swarm control theory. For second, its modular architecture brings efficient storage of main components including oil boom and facilitates maintenance. For the last, its geometric form and shape enables whole system to be installed to helicopter, boat or oil tanker itself with ease and to rapidly deploy the units to the oil spill area.

• Korean Medical Education Review
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2010

The purpose of this study was to review the definition of cognitive load (CL), the relationship between CL and instructional design, and to provide a viewpoint of CL in curriculum and instructional design in medical education. Cognitive load theory (CLT) makes use of three hypotheses about the structure of human memory: working memory (WM) is limited in terms of the amount of information it can hold, in contrast with WM, long term memory is assumed to have no limits and organizes information as schemata. CL indicates the mental load on the limitation of WM. CLT has been used to design instructional interventions that help to ease the learning process. Extraneous CL is related to irrelevant instructional interventions, while intrinsic CL is the complexity of the information itself. Germane CL is the cognitive process for acquiring schema formation. It is a necessary CL to achieve deeper comprehension and solve problems. The range of medical education includes complex, multifaceted and knowledge-rich domains with clinical skills and attitudes. Therefore, CLT may be used to guide instructional design in medical education in terms of decreasing extraneous CL, adjusting intrinsic CL and enhancing the germane CL.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.72-78
• /
• 2011

Localization information of an object can be a very useful element for many application areas. Presently, GPS is typically used for it, but many researches on the wireless localization technology are going on recently actively using mobile communication network, wireless sensor network, and ad hoc network in order to overcome the limitations of the GPS such as indoor, cost, power consumption, and etc. Therefore, this article surveys the most representative wireless localization techniques, which can be deployed in the wireless networks, and their principles and performances are analyzed based on the researched papers. In a conclusion, selection of a localization technique should consider the key design elements to a given application from the design elements such as localization environment, accuracy, time to fix, computation amount, implementation ease, and etc.