• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.65-75
• /
• 2006

건물의 지진응답을 평가하기 위하여 비선형 푸시오버 해석을 수행한다. 구조물의 비탄성 지진응답을 정확히 예측하기 위해서는, 비선형해석에 사용되는 층하중분포가 구조물의 시간이력 지진응답 동안 실제로 발생되는 지진하중분포를 나타낼 수 있어야 한다. 본 연구에서는 건축물의 지진하중분포를 예측하기 위하여 새로운 모드조합법을 개발하였다. 개발된 모드조합법에서는 모드조합계수를 곱한 각 모드의 스펙트럼응답을 조합하여 다수의 지진하중분포를 예측한다. 모멘트 골조와 켄틸레버 벽체에 대한 변수연구를 수행하였다. 변수연구 결과를 토대로, 각 고유모드가 구조물의 지진응답에 미치는 영향을 나타내는 모드조합계수를 정의하였다. 다양한 정형 및 수직 비정형 구조물에 대하여 제안된 계수모드조합법을 적용하였다. 그 결과 제안된 모드조합법은 시간이력 응답 동안 구조물에 실제로 발생되는 지진하중분포를 정확히 예측할 수 있었다.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.133-140
• /
• 2018

Vertical earthquake motions can occur along with horizontal earthquakes, so that Structure should be designed to resist Seismic loads in all directions. Especially, due to the dynamic characteristics such as the vibration mode, when the vertical seismic load, the dynamic response of the Spatial structure is large. In this study, the seismic response of the lattice dome to horizontal and vertical seismic loads is analyzed, and a reasonable seismic load combination is analyzed by combining horizontal and vertical seismic response results. In the combination of the horizontal seismic load, the largest result is obtained when the direction of the main axis of the structure coincides with the direction of seismic load. In addition, the combination of vertical seismic load and horizontal seismic load was the largest compared with the combination of horizontal seismic load. Therefore, it is considered that the most reasonable and stable design will be achieved if the seismic load in vertical direction is considered.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.185-192
• /
• 2005

Using existing static methods, it is possible to estimate accurately the reponses of structures governed by the fundamental mode. However, these methods do not provide reliable estimates for the structure where higher mode effects are significant. Parametric study was performed to analyze the dynamic characteristics of the structure with long vibration period. Based on the investigations, a new modal combination method using modal combination coefficients, Factored Modal Combination, was developed, and static earthquake load patterns addressing higher mode effects reasonably were proposed. Existing modal combination methods, such as SRSS and CQC, lack a theoretical basis to be applied to inelastic structures. In contrast, the proposed method can be applied conveniently in inelastic range as well as in elastic range.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.19-24
• /
• 1989

The current load combination criteria for design of nuclear power plant structures are not based on the probability-based design concept but rely on the conventional design concept. In this paper, a load combination criteria for design of NPP coin-tainment structures are proposed based on a FEM-based random vibration analysis. More accurate reliability analyses under various dynamic loads such as earthquake loads were made possible by incorporating the FEM and random vibration theory, which is different from the conventional reliability analysis method. In this paper, the load factors for the design of NPP structures in Korea are proposed by considering appropriate fond combination criteria for design.

• 전산구조공학
• /
• 제3권1호
• /
• pp.51-57
• /
• 1990

현행 원자력 발전 구조물의 설계하중 조합규준은 확률적 개념에 의한것이 아닌 재래적인 설계 개념을 그대로 사용하고 있는 실정이다. 본 연구에서는 원자력 발전 구조물의 설계하중 조합 규준을 FEM에 기초한 랜덤 진동 해석을 통하여 제안하였다. 종래의 일반적 신뢰성 해석 방법과는 달리 유한요소 해석 결과를 랜덤 진동 이론에 결합하여 해석함으로서 지진하중과 같은 각종 동적 하중에 대한 보다 정확한 신뢰성 해석이 가능하게 되었다. 본 연구에서는 설계하중 조합 규준을 통하여 국내 원자력 발전 구조물에 적합한 설계하중 계수를 제안하였다.

• Structural Engineering and Mechanics
• /
• 제87권1호
• /
• pp.57-68
• /
• 2023

Response spectrum method is still an effective approach for the design of buildings with supplemental dampers. In practice, complex complete quadratic combination (CCQC) rule is always used in the response spectrum method to consider the effect of non-classical damping. The conventional CCQC rule is based on exact complex mode vectors. Sometimes the calculated complex mode vectors may be not excited by the external loading and errors in the structural responses always arise due to the mode truncation. Load-dependent Ritz (LDR) vectors are associated with the external loading and LDR vectors not excited can be automatically excluded. Also, contributions of higher modes are implicitly contained in the LDR vectors in terms of static responses. To improve the calculation efficiency and accuracy, LDR vectors are introduced in the CCQC rule in the present study. Firstly, the generation procedure of LDR vectors suitable for non-classical damping system is presented. Compared to the conventional LDR vectors, the LDR vectors herein are complex-valued and named as complex LDR (CLDR) vectors. Based on the CLDR vectors, the CCQC rule is then rederived and an improved response spectrum method is developed. Finally, the effectiveness of the proposed method in this paper is verified through three typical non-classical damping buildings. Numerical results show that the CLDR vector is superior to the complex mode with the same number in the calculation. Since the generation of CLDR vectors requires less computational cost and storage space, the method proposed in this paper offers an attractive alternative, especially for structures with a large number of degrees of freedom.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.677-688
• /
• 2021

The building design codes and standards in many countries usually are either fully or partially adopted from the international codes. However, regional conditions like the quality of construction industry and different statistical parameters of load and resistance have essential roles in the code calibration of building design codes. This paper presents a probabilistic approach to assess the reliability level of adopted national building codes by simulating design situations and considering all load combinations. The impact of the uncertainty of wind and earthquake loads, which are entirely regional condition dependent and have a high degree of uncertainty, are quantified. In this study, the design situation is modeled by generating thousands of numbers for load effect ratios, and the reliability level of steel elements for all load combinations and different load ratios is established and compared to the target reliability. This approach is applied to the Iranian structural steel code as a case study. The results indicate that the Iranian structural steel code lacks safety in some load combinations, such as gravity and earthquake load combinations, and is conservative for other load combinations. The present procedure can be applied to the assessment of the reliability level of other national codes.

• 지질공학
• /
• 제31권1호
• /
• pp.43-53
• /
• 2021

본 연구에서는 부동침하 영향을 고려하여 지진 하중을 받는 1,300 ton 규모의 스테인리스 배수지 구조에 대한 3차원 유한요소 해석을 수행하였다. 1,000 ton 규모 이상의 대용량에 대한 지진하중은 한국표준 규격 규정으로부터 확장하여 산정하였다. 부동침하가 발생한 배수지는 특히 지진하중에 대하여 구조적 거동에 중요한 영향이 발생할 수 있다. 다양한 하중 조합에 대하여 정상상태의 경우, 침하가 고려된 경우, 그리고 수평으로 보강된 경우에 대한 응력 및 변위 분포의 변화를 도출하였다. 수치해석 결과로부터 부동침하가 발생된 배수지는 지진하중 조합에 대하여 최대 변위가 크게 증가하게 됨을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제12권4호
• /
• pp.353-379
• /
• 2012

The accuracy of the 30% and SRSS rules, commonly used to estimate the combined response of structures, and some related issues, are studied. For complex systems and earthquake loading, the principal components give the maximum seismic response. Both rules underestimate the axial load by about 10% and the COV of the underestimation is about 20%. Both rules overestimate the base shear by about 10%. The uncertainty in the estimation is much larger for axial load than for base shear, and, for axial load, it is much larger for inelastic than for elastic behavior. The effect of individual components may be highly correlated, not only for normal components, but also for totally uncorrelated components. The rules are not always inaccurate for large values of correlation coefficients of the individual effects, and small values of such coefficients are not always related to an accurate estimation of the response. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. In the general case, the level of underestimation or overestimation depends on the degree of correlation of the components, the type of structural system, the response parameter, the location of the structural member and the level of structural deformation. The codes should be more specific regarding the application of these rules. If the percentage rule is used for MDOF systems and earthquake loading, at least a value of 45% should be used for the combination factor.

• Structural Engineering and Mechanics
• /
• 제44권2호
• /
• pp.163-178
• /
• 2012

A strut-and-tie model is introduced in this paper to predict the ultimate shear strength of non-seismically detailed columns. The validity and applicability of the proposed strut-and-tie model are evaluated by comparison with available experimental data. The model was developed based on visible crack patterns observed on the test specimens. The concrete contribution is integrated into the strut-and-tie model through a concept of equivalent transverse reinforcement. To further validate the model a full-scale non-seismically detailed reinforced concrete column was tested to investigate its seismic behavior. The specimen was tested under the combination of a constant axial load, $0.30f_c{^{\prime}}A_g$ and quasi-static cyclic loadings simulating earthquake actions. Quasi-static cyclic loadings simulating earthquake actions were applied to the specimen until it could not sustain the applied axial load. The analytical results reveal that the strut-and-tie method is capable of modeling to a satisfactory accuracy the ultimate shear strength of non-seismically detailed columns subjected to reserved cyclic loadings.