• Steel and Composite Structures
• /
• 제27권6호
• /
• pp.675-689
• /
• 2018

Buckling-restrained braces (BRBs) have received considerable attention in seismic design of various types of structures. Conventional BRBs are composed of steel core and surrounding steel tube filled with concrete. Eliminating the steel tube can be advantageous to BRB. In this study the idea of replacing the steel tube by CFRP layers in BRBs is proposed. The advantages of this type of BRB are mentioned, and its design criteria are introduced. The construction procedure of two BRB specimens is described. The specimens are uniaxially tested based on moderate, and severe earthquake levels and the performance of the specimens is investigated. The backbone curves resulted from the hysteresis curve are presented for the design proposes. The results of this study show that CFRP layers can effectively provide the expected performance of the encasing, and the proposed BRB can be considered a viable alternative to the conventional BRBs.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.200-207
• /
• 2002

Energy dissipation capacity and earthquake responses of steel structures installed with unbonded braces(UB) were investigated. Nonlinear dynamic time history analyses were carried out to investigate the seismic response of multi-story model structures with UB having various size and strength. Various techniques were applied to determine proper story-wise distribution of UB in multi-story structures. The analysis results show that the maximum displacements of structures generally decrease as the stiffness of UB increases. However there are cases that the maximum displacement and accumulated damage increases as the stiffness of UB increases, which needs to be checked before deciding proper amount of UB.

• Earthquakes and Structures
• /
• 제2권1호
• /
• pp.1-24
• /
• 2011

During very strong earthquakes, seismically isolated buildings may experience large horizontal relative displacements, which may lead to poundings if an insufficiently wide clearance is provided around the building. This paper investigates, through numerical simulations, the effectiveness of using rubber bumpers, which could be attached at locations where it is likely to have impacts, in order to act as shock-absorbers. For the simulation of the dynamic behavior of such rubber bumpers during impacts, a nonlinear force-based impact model, which takes into account the finite thickness of the rubber bumpers, has been developed. Subsequently, a series of parametric analyses are performed to assess the effect of the gap size, the earthquake characteristics and the thickness, compressive capacity and damping of the bumpers. The stiffness of the moat wall is also parametrically considered during poundings of a seismically isolated building, as another potential mitigation measure for poundings of seismically isolated buildings.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.481-496
• /
• 2015

A Lead Extrusion Damper (LED) is experimentally studied under various frequencies and displacement amplitudes. Experimental results show that the force-displacement hysteresis loops of the LED are close to rectangular and the force-velocity hysteresis loops exhibit nonlinear hysteretic characteristic. Also, the LED can provide consistent energy dissipation without any stiffness degradation. Based on the experimental results, a mathematical model is then proposed to describe the effects of frequency and displacement on property of LED. It can be proved from the comparison between experimental and numerical results that the mathematical model can accurately describe the mechanical behavior of LED. Subsequently, the seismic responses of the Schwedler reticulated shell structure with LEDs are analyzed by ANSYS software, in which three different installation forms of LEDs are considered. It can be concluded that the LED can effectively reduce the displacement and acceleration responses of this type of structures.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.409-418
• /
• 2018

In this study, experiments were carried out after fabricating and installing a physical model considering the size of the prototype. In the model test, the number of struts placed on the wall and the applied acceleration were selected as test variables. Two different types of waves, long-period and short-period, were applied with magnitudes of 0.05g, 0.1g, 0.2g, and 0.3g. Measured are displacements at specified points. As a result of the analysis, displacement exceeding the allowable displacement of the wall occurred at an acceleration greater than 0.05g to 0.1g depending on the seismic waves applied. Therefore guidelines have to be established through further studies for aseismic design of earth retaining walls.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.311-320
• /
• 2019

Obelisks are historical monuments. There are several obelisks dating from ancient Egyptian period, located around various parts of the world. The city of Istanbul is a home to the Obelisk of Theodosius at the Hippodrome. Due to the expectation of a large event in the near future, the evaluation of seismic response of the Obelisk gets importance. Therefore, in this study structural dynamic behavior of the Obelisk was investigated using discrete element approach. Nonlinear dynamic analyses were performed using real and synthetic time series. Real and synthetic ground motions analyzed from this study seems consistent with the earthquake hazard levels that would be expected at the site of the Obelisk in the occurrence of an event of moment magnitude above 7.0 near Istanbul. Results are evaluated in terms of variation of displacement, relative displacement of adjacent blocks, normal stress and shear stress in time.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.724-731
• /
• 2016

지진으로 인한 구조물의 피해가 지속적으로 증가하면서, 구조물의 취약성을 평가하는 일은 지진 대비에 필수적으로 여겨지고 있다. 지진 취약도 곡선은 지진에 대한 구조물의 안전도에 대한 확률 지표로써 널리 이용되고 있으며, 많은 연구자들에 의해 보다 정확하고 효율적인 취약도 곡선 도출을 위한 노력이 계속되고 있다. 하지만 기존의 대부분의 연구에서는 취약도 곡선 도출시 수치해석 시간 절약을 위해 단순화된 2차원 해석모델을 사용해 왔는데, 많은 경우에 있어 2차원 모델은 정확한 구조물의 내진 거동 및 지진 취약성을 평가하기에 적당하지 않을 수 있다. 이에 본 연구에서는 3차원 해석 모델을 사용하여 더욱 정확하면서도 여전히 효과적으로 지진 취약도 곡선을 도출할 수 있는 방법을 제시한다. 이 방법은 신뢰성 해석 소프트웨어인 FERUM과 구조해석 소프트웨어인 ZEUS-NL을 서로 연동시켜 상호 자동적인 데이터 교환이 가능하게 하고, 샘플링 기법이 아닌 FORM 해석 기법을 통해 구조물의 파괴확률을 구한다. 이는 3차원 모델을 사용의 경우에도 효율적으로 구조 신뢰성 해석이 가능하게 해준다. 이를 이용해 RC 프레임 구조물의 3차원 해석 모델을 사용하여 지진 취약성 평가를 수행하였다.

• 한국지진공학회논문집
• /
• 제18권1호
• /
• pp.53-61
• /
• 2014

RC shear wall sections which have irregular shapes such as T, ㄱ, ㄷ sections are typically used in low-rise buildings in Korea. Pushover analysis of building containing such members costs a lot of computation time and needs professional knowledge since it requires complicated modeling and, sometimes, fails to converge. In this study, a method using an equivalent column element for the shear wall is proposed. The equivalent column element consists of an elastic column, an inelastic rotational spring, and rigid beams. The inelastic properties of the rotational spring represent the nonlinear behavior of the shearwall and are obtained from the section analysis results and moment distribution for the member. The use of an axial force to compensate the difference in the axial deformation between the equivalent column element and the actual shear wall is also proposed. The proposed method is applied for the pushover analysis of a 5- story shear wall-frame building and the results are compared with ones using the fiber elements. The comparison shows that the inelastic behavior at the same drift was comparable. However, the performance points estimated using the pushover curves showed some deviations, which seem to be caused by the differences of estimated yield point and damping ratios.

• 한국지진공학회논문집
• /
• 제13권2호
• /
• pp.1-14
• /
• 2009

교각의 합리적이고 경제적인 내진설계를 위해서는 연성도에 기반한 내진설계가 필요하며 이를 위해서는 신뢰성 있는 전단평가가 필수적이다. RC 기둥의 전단거동은 휨거동과 달리 부재의 단면크기, 형상비, 축력, 연성도 등 다양한 요인에 의하여 영향을 받아 거동이 매우 복잡하다.따라서,이들 요인을 고려한 많은 설계식 및 경험식이 제안되고 있으나 부재의 초기전단강도와 연성도에 따른 전단강도 저하를 평가하는데 상당한 차이를 보이고 있다. 본 연구에서는 형상비,단면의 중공비, 복부면적, 하중패턴을 변수로 하는 실험적 연구를 수행하여 중공단면 기둥의 초기 전단강도 특성을 살펴보았다. 실험결과는 기존의 다양한 전단평가식과 비교.검토하여 특성을 분석하였으며, 역학적 특성과 실험결과에 기초하여 보다 합리적인 초기 전단평가식을 제안하고 타당성을 검토하였다.

• Earthquakes and Structures
• /
• 제10권5호
• /
• pp.989-1012
• /
• 2016

The structural dynamic behavior and yield strength considering both ductility and strain rate effects are analyzed in this article. For the single-degree-of-freedom (SDOF) system, the relationship between the relative velocity and the strain rate response is deduced and the strain rate spectrum is presented. The ductility factor can be incorporated into the strain rate spectrum conveniently based on the constant-ductility velocity response spectrum. With the application of strain rate spectrum, it is convenient to consider the ductility and strain rate effects in engineering practice. The modal combination method, i.e., square root of the sum of the squares (SRSS) method, is employed to calculate the maximum strain rate of the elastoplastic multiple-degree-of-freedom (MDOF) system under uniform excitation. Considering the spatially varying ground motions, a new response spectrum method is developed by incorporating the ductility factor and strain rate into the conventional response spectrum method. In order to further analyze the effects of strain rate and ductility on structural dynamic behavior and yield strength, the cantilever beam (one-dimensional) and the triangular element (two-dimensional) are taken as numerical examples to calculate their seismic responses in time domain. Numerical results show that the permanent displacements with and without considering the strain rate effect are significantly different from each other. It is not only necessary in theory but also significant in engineering practice to take the ductility and strain rate effects into consideration.