• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3795-3799
• /
• 2013

The second-order rate constants ($k_N$) have been measured spectrophotometrically for nucleophilic substitution reactions of Y-substituted-phenyl 2-methylbenzoates (6a-e) with a series of cyclic secondary amines in MeCN at $25.0{\pm}0.1^{\circ}C$. Comparison of the $k_N$ values for the reactions of 4-nitrophenyl 2-methylbenzoate (6d) with those reported previously for the corresponding reactions of 4-nitrophenyl 2-methoxybenzoate (5) reveals that 6d is significantly less reactive than 5, indicating that modification of 2-MeO in the benzoyl moiety of 5 by 2-Me (i.e., $5{\rightarrow}6d$) causes a significant decrease in reactivity. This supports our previous report that aminolysis of 5 proceeds through a six-membered cyclic intermediate, which is highly stabilized through intramolecular H-bonding interactions. The Br${\o}$nsted-type plot for the reactions of 6d with a series of cyclic secondary amines is linear with ${\beta}_{nuc}=0.71$, which appears to be a lower limit of ${\beta}_{nuc}$ for a stepwise mechanism with breakdown of an intermediate ($T^{\pm}$) being rate-determining step (RDS). The Br${\o}$nsted-type plot for the reactions of 6a-e with piperidine is curved, i.e., the slope of Br${\o}$nsted-type plot (${\beta}_{lg}$) decreases from -1.05 to -0.41 as the leaving-group basicity decreases. The nonlinear Br${\o}$nsted-type plot has been taken as evidence for a stepwise mechanism with a change in RDS (e.g., from the $k_2$ step to the $k_1$ process as the leaving-group basicity decreases). Dissection of $k_N$ into the microscopic rate constants associated with the reactions of 6a-e with piperidine (e.g., $k_1$ and $k_2/k_{-1}$ ratio) also supports the proposed mechanism.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.167-172
• /
• 2003

This study was performed to fabricate a batch-type SPR biosensing system using a thiolated E. coli antibody coupling, and to explore the feasibility of real-time detection of E. coii in a stagnant sample solution. In advance. “O” and “K” antigenic serotype E. coli antibodies were thiolated with sulfo-LC-SPDP and dithiothreitol, and immobilized by chemisorption in the gold surface of compact SPR sensors. When the SPR biosensor immobilized with E. coli antibody monitored a E. coli solution, it took 3 to 5 min to stabilize. The SPR biosensing system developed in this study was able to detect E. coli in the range above 10$^4$ CFU/mL at the 0.05 significant level. Also, the SPR biosensor had possibility to significantly detect E. coli in the range of 10$^2$ to 10$^4$ CFU/mL in E. coli solutions. Meanwhile, when the SPR biosensor immobilized with 5. coli antibody was cleaned with NaOH solutions, its ability to detect E. coli largely decreased due to wash-out of the immobilized antibody. In order to reuse the SPR sensor, it should be antibody-immobilized newly.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.313-321
• /
• 2017

The emergence of E-book have allowed readers to interact with other readers and to actively participate (e.g. social reading). Furthermore, there is a growing demand in writer's community to take the advantage of the feedback from their readers to update the content of E-book. To do that, they require the service that utilizes the user feedback while creating or updating the e-book content. This study aims to let authors collect and to apply the reader's feedback on E-book content. However, in order to apply the user feedback, users first need to explicitly type the feedback, and even if they do, authors need to develop the software to automatically analyze and to apply the user feedback. This makes difficult for authors without programming background to produce E-book with automatic content adaptation. In this paper, we propose Feedback Clue Model to generate, analyze and apply the user feedback into E-book content. Based on this model, we develop the block editor which allows easy implementation of E-book that can be dynamically updated.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.386-391
• /
• 2014

Atmospheric-pressure nonthermal corona discharge plasma was applied to the sterilization of biologically contaminated scoria powder. Escherichia coli (E. coli) culture solution was uniformly sprayed throughout the scoria powder for artificial inoculation, which was well mixed to ensure uniformity of the batch. The effect of the key parameters such as discharge power, treatment time, type of gas and electrode distance on the sterilization efficiency was examined and discussed. The experimental results revealed that the plasma treatment was very effective for the sterilization of scoria powder; 5-min treatment at 15 W could sterilize more than 99.9% of E. coli inoculated into the scoria powder. Increasing the discharge power, treatment time or applied voltage led to an improvement in the sterilization efficiency. The effect of type of gas on the sterilization efficiency was in order of oxygen, synthetic air (20% oxygen) and nitrogen from high to low. The inactivation of E. coli under the influence of corona discharge plasma can be explained by cell membrane erosion or etching resulting from UV and reactive oxidizing species (oxygen radical, OH radical, ozone, etc.), and the destruction of E. coli cell membrane by the physical action of numerous corona streamers.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.4
• /
• pp.75-97
• /
• 2015

This study aims to identify the needs of the disabled around E-books in order to develop such E-books. This study surveys the disabled, including the visually disabled and the deaf, on the usage of publications by disability type, the area of improvement to enhance E-book accessibility and the E-book functions for the disabled. The study surveys 196 people with the following key findings. First, the disabled have a preference for paper books over E-books. Second, the disabled read for practical tips in daily lives, cultural development and self development in such particular order. Third, the disabled have a negative view on function and variety of E-books, and want E-books to be customizable software-based rather than a simple platform-based.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.316-320
• /
• 2003

In order to investigate the dyeing property of poly trimethylene terephthalate(PTT) fabric, the dyeing of PTT fabric was carried at under condition of different dyeing temperature by using several disperse dyes with different energy level. Particularly, this study discussed the PTT dyeing thermodynamically. Used disperse dyes were selected based on the their chemical structure and energy level. The obtained results were as followings; The dye adsorption of S type disperse dye such as C. I. Disperse Blue 79 increased with increasing dyeing temperature. In a exhaustion rate of PTT fabric with disperse dyes, C. I. Disperse Blue 56 showed higher values than that of C. I. Disperse Orange 29 and Blue 79. For the interpretation of thermodynamic dyeing behavior, the partition coefficient ( K ) and some several thermodynamic parameters such as standard affinity$(-\mu^\circ)$ and heat of dyeing$(\Delta{H}^\circ)$ calculated from the adsorption isotherm. From above results, as the energy level of disperse dye is small, the partition coefficient and standard affinity increased. But the heat of dyeing of PTT fabric with disperse dye showed high negative value in order of E type(C. I. Disperse Blue 56), SE type(C. I. Disperse Orange 29) and S type(C. I. Disperse 79).

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.2
• /
• pp.33-45
• /
• 1986

In the present paper, the nonlinear analysis of dynamic response of the jacket type offshore structures subject to nonlinear fluid force is performed. Furthermore, several analysis methods, such as quasi-static analysis, Newmark-$\beta$ method and state vector time integration technique, and described and compared with each others in order to investigate the efficiency numerical of the schemes for this kind of nonlinear structural analysis. In the problem formulation, various environmental forces acting on the jacket type offshore structure have been studied and calculated. Particularly, hydrodynamic forces are calculated by using the Morison type formula, which contains the interaction effect between the motion of the structure and the velocity of fluid particles. Also, Stokes' 5th order wave theory and Airy's linear wave theory are used to predict the velocity distribution of the fluid particles. Finally, the nonlinear equation of motion of the structure is obtained by using three-dimensional finite element formulation. Based on the above procedures, two examples, i.e. a single pile and a typical offshore jacket platform, are studied in details.

• Steel and Composite Structures
• /
• v.34 no.2
• /
• pp.279-288
• /
• 2020

The computational post-buckling strength of the tilted sandwich composite shell structure is evaluated in this article. The computational responses are obtained using a mathematical model derived using the higher-order type of polynomial kinematic in association with the through-thickness stretching effect. Also, the sandwich deformation behaviour of the flexible soft-core sandwich structural model is expressed mathematically with the help of a generic nonlinear strain theory i.e. Green-Lagrange type strain-displacement relations. Subsequently, the model includes all of the nonlinear strain terms to account the actual deformation and discretized via displacement type of finite element. Further, the computer code is prepared (MATLAB environment) using the derived higher-order formulation in association with the direct iterative technique for the computation of temperature carrying capacity of the soft-core sandwich within the post-buckled regime. Further, the nonlinear finite element model has been tested to show its accuracy by solving a few numerical experimentations as same as the published example including the consistency behaviour. Lastly, the derived model is utilized to find the temperature load-carrying capacity under the influences of variable factors affecting the soft-core type sandwich structural design in the small (finite) strain and large deformation regime including the effect of tilt angle.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.57-74
• /
• 2021

The thermal eigenvalue responses of the graded sandwich shell structure are evaluated numerically under the variable thermal loadings considering the temperature-dependent properties. The polynomial type rule-based sandwich panel model is derived using higher-order type kinematics considering the shear deformation in the framework of the equivalent single-layer theory. The frequency values are computed through an own home-made computer code (MATLAB environment) prepared using the finite element type higher-order formulation. The sandwich face-sheets and the metal core are discretized via isoparametric quadrilateral Lagrangian element. The model convergence is checked by solving the similar type published numerical examples in the open domain and extended for the comparison of natural frequencies to have the final confirmation of the model accuracy. Also, the influence of each variable structural parameter, i.e. the curvature ratios, core-face thickness ratios, end-support conditions, the power-law indices and sandwich types (symmetrical and unsymmetrical) on the thermal frequencies of FG sandwich curved shell panel model. The solutions are helping to bring out the necessary influence of one or more parameters on the frequencies. The effects of individual and the combined parameters as well as the temperature profiles (uniform, linear and nonlinear) are examined through several numerical examples, which affect the structural strength/stiffness values. The present study may help in designing the future graded structures which are under the influence of the variable temperature loading.

• Korean Journal of Veterinary Service
• /
• v.21 no.2
• /
• pp.149-156
• /
• 1998

The present study was carried out to investigate the biochemical characteristics, antibiotic susceptibility and toxin(ST, LT, VT1.2 type) production test of 60 Escherichia coli isolated from diseased domestic animals in southern area of Kyungbuk province from April to December 1997. 1. The biochemical and cultural reaction were consistent with the classification criteria of Edwards and Ewing. 2. In antibiotic susceptibility test, 60 E coli showed highly susceptible to CL(96.7%), XNL(86.7%), AN(81.7%), SXT(61.7%), Lin(55%), GM(53.3%), KM(41.7%), N(41.7%), ENR(40%), AM(40%), CF(30%), 5(13.3%) and Te(11.7%), in order. 3. Sixty E coli isolates were multiful resistant to seven or more antibiotics incombination. 4. Three strains for 60 E coli were detected heat-labile enterotoxin(LT) and that's titers were 2, 8 and 16, respectively.