• Journal of Preventive Medicine and Public Health
• /
• v.7 no.2
• /
• pp.403-415
• /
• 1974

The author has investigated epidemiological features of human cases of epidemic encephalitis (E. E.) in the Republic of Korea and the status of antibody requisition in pre-and post-epidemic time. And virological and serological studies with regarding the relationship of E. E. infection between human and piglet, and field survey against its vector by means of virus isolation from mosquitoes were carried out. Finally, vaccine field trial against human population has also been evaluated in order to confirm its effectiveness. The results of the studies are summarized as follows : 1. The annual incidence of reported cases during the past 25 years (1949-1973) in the Republic of Korea has shown two patterns, one was typical cyclic incidence and the other one was irregular. Annual average morbidity and mortality rate per 100,000 population were 5.7 and 2.1 and fatality rate was 34.6% in typical cyclic years. 2. With regard to the geographical distribution of E. E., the province of Jeolla-Bug-Do illustrated the highest incidence regardless of the epidemic size. 3. The main epidemic period was between mid-August and mid-September (above 90% of the total number of cases). The first case was reported in middle of July and the epidemic ceased in late of October. 4. An analysis of the age distribution of cases of E. E., has shown that above 90% of the total cases occurred in the age groups under 14 years and it was noted that about its 54% were occurred in the age groups between 5-9 years group. 5. Through the Haemagglutination Inhibition (H-I) test for the laboratory diagnosis of E. E., it was found that higher H-I antibody titer was usually detected in the convalescent phase, 15 days after onset. 6. The H-I antibody survey against 563 healthy population by age groups during the pre-epidemic season showed that 422(75%) were less than H-I titer, 1:20 and 122(21.7%) were positive H-I titer, 1:20. Among the 94 American in Seoul who had not been in E. E. endemic area previously only one person had appeared sero-conversion as a H-I titer of 1:80 after post-epidemic season. 7. The E. E. virus could be isolated from the mosquitos pools-C, tritaeniorhyncus which were caught between late July and middle August. 8. E.E. Virus was also isolated from piglet blood on early August and H-I antibody conversion was occurred mostly on middle of August. 9. H-I antibody sero-conversion rate reached to high level when vaccine purified by mouse brain tissue inoculated, showing 98.9%. Higher antibody titer was acquired when booster inoculation was performed, Four fold rise of H-I add N-T antibodies was confirmed with 93.2% and 82.1% respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.2
• /
• pp.25-29
• /
• 1999

The purpose of this paper is to find the magnetic filed distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation in a detailed model of the actual motor was analyzed through F.E.M.(finite Element Method). As a result, it has been proved that the high-Tc superconducting tapes can with-stand 4 A of current with staility. 4 A was the amount of current with stability. 4 A was the amount of current needed to achieve 600 A·turns which is required by the previous simulation aimed at developing this the flux damper reduces armature reactance during the motor operation. But it was observed that the flux damper generates loss by means of leakage flux and this decreases the output of the motor by about 5%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.412-413
• /
• 2006

The electrical conduction mechanism of ITO / Terbium tris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$]/Mg/Al devices has been investigated. The calculation of electric field in single layer organic layer between cathode and anode shows the uniform distribution for the electron injection barrier of over 1.4 eV. The measured current-voltage curve shows well matching with the calculated curve based on the tunneling injection of electron under the uniform distribution of electric field.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.579-588
• /
• 2003

There are many unfavorable conditions that lead to shortening life of cable by causing dielectric breakdown and aging such as field concentrations occurring in intermediate materials linking each cables, penetration of various impurities, and undermining of cable insulation layers. This paper simulated investigated partial discharge properties of XLPE which is widely used for ultra high voltage cable insulation materials and EPDM which is being used as insulation layer of cable joint materials kit, using Boundary Element Method. The result of computer simulation showed that inner-Void defect caused silicone oil to weaken the E-field effect. and we also found that E-field distribution in EPDM remained relatively lower than that in XLPE.

• Steel and Composite Structures
• /
• v.47 no.4
• /
• pp.503-511
• /
• 2023

Stability of laminated plate under thermal load varied linearly along thickness, is developed using a higher order displacement field which depend on a parameter "m", whose value is optimized to get results closest to three-dimension elasticity results. Hamilton, s principle is used to derive equations of motion for laminated plates. These equations are solved using Navier-type for simply supported boundary conditions to obtain non uniform critical thermal buckling and fundamental frequency under a ratio of this load. Many design parameters of cross ply and angle ply laminates such as, number of layers, aspect ratios and E1/E2 ratios for thick and thin plates are investigated. It is observed that linear and uniform distribution of temperature reduces plate frequency.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.209-220
• /
• 2004

If protocol has fast operations and short key length, it can be efficient user authentication protocol. Lenstra and Verheul proposed XTR. XTR have short key length and fast computing speed. Therefore, this can be used usefully in complex arithmetic. In this paper, to design efficient user authentication protocol we used a subgroup of Galois Field to problem domain. Proposed protocol does not use GF(p/sup 6/) that is existent finite field, and uses GF(p²) that is subgroup and solves problem. XTR-ElGamal based user authentication protocol reduced bit number that is required when exchange key by doing with upside. Also, proposed protocol provided easy calculation and execution by reducing required overhead when calculate. In this paper, we designed authentication protocol with y/sub i/ = g/sup b.p/sup 2(i-1)//ㆍv mol q, 1(equation omitted) 3 that is required to do user authentication.

• Journal of the Korean Mathematical Society
• /
• v.51 no.5
• /
• pp.881-895
• /
• 2014

In a recent paper [10] we introduced the notion of Levi harmonic map f from an almost contact semi-Riemannian manifold (M, ${\varphi}$, ${\xi}$, ${\eta}$, g) into a semi-Riemannian manifold $M^{\prime}$. In particular, we compute the tension field ${\tau}_H(f)$ for a CR map f between two almost contact semi-Riemannian manifolds satisfying the so-called ${\varphi}$-condition, where $H=Ker({\eta})$ is the Levi distribution. In the present paper we show that the condition (A) of Rawnsley [17] is related to the ${\varphi}$-condition. Then, we compute the tension field ${\tau}_H(f)$ for a CR map between two arbitrary almost contact semi-Riemannian manifolds, and we study the concept of Levi pluriharmonicity. Moreover, we study the harmonicity on quasicosymplectic manifolds.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.165-170
• /
• 2013

This paper presents the iron loss prediction of rotating electric machines taking account of the vector hysteretic properties of electrical steel sheet. The E&S vector hysteresis model is adopted to describe the vector hysteretic properties of a non-oriented electrical steel sheet, and incorporated into finite element analysis (FEA) for magnetic field analysis and iron loss prediction. A permanent magnet synchronous generator is taken as a numerical model, and the analyzed magnetic field distribution and predicted iron loss by using the proposed method is compared with those from a conventional method which employs an empirical iron loss formula with FEA based on a non-linear B-H curve. Through the comparison the effectiveness of the presented method for the iron loss prediction of the rotating machine is verified.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.58.4-58.4
• /
• 2019

We present the application of the Point Spread Function (PSF) deconvolution method to the astronomical Integral Field Unit (IFU) Spectroscopy data focus on the restoration of the galaxy kinematics. We apply the Lucy-Richardson deconvolution algorithm to the 2D image at each wavelength slice. We make a set of mock IFU data which resemble the IFU observation to the model galaxies with a diverse combination of surface brightness profile, S/N, line-of-sight geometry and Line-Of-Sight Velocity Distribution (LOSVD). Using the mock IFU data, we demonstrate that the algorithm can effectively recover the stellar kinematics of the galaxy. We also show that lambda_R_e, the proxy of the spin parameter can be correctly measured from the deconvolved IFU data. Implementation of the algorithm to the actual SDSS-IV MaNGA IFU survey data exhibits the noticeable difference on the 2D LOSVD, geometry, lambda_R_e. The algorithm can be applied to any other regular-grid IFS data to extract the PSF-deconvolved spatial information.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.288-293
• /
• 2000

BPM simulation was used in order to fabricate the LiNbO$_3$optical waveguide with optical source of He-Ne laser(λ=0.6328[$\mu$m]). we observed electric field E$_{x}$, E$_{y}$ in the x,y-direction are simulated at the LiNbO$_3$substrate (X1 55[$\mu$m]$\times$Z1 5000[$\mu$m]), where the depth, width and buffer layer of waveguide are 0.2[$\mu$m],4[$\mu$m] and 0.02[$\mu$m] respectively. By applying these parameters of single waveguide to simulate a X-switch, we have chosen index change of 0.002, width of 3[$\mu$m] and angle of 0.4$^{\circ}$~0.6$^{\circ}$of optical waveguide and under these conditions, optical beam propagates cross-side at 0.4$^{\circ}$. When applied switching voltage of 25[V], optical beam of X-switch turns cross-side to bar-side at intersection angle 0.4$^{\circ}$, index change of 0.002, waveguide width of 3[$\mu$m], electrode gap 2[$\mu$m]. By the above results, we can obtain design conditions of theoretical analysis of an X-switch optical waveguide.e.e.