• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.238-238
• /
• 2012

Ag (silver)의 일함수는 T-OLED (Top Emission Organic Light Emitting Diode)의 전극소자로 사용하기에는 다소 낮다는 단점이 있다(~4.3 eV). 이러한 단점을 해결하기 위한 대안으로 Ag 박막의 표면을 플라즈마 처리, UV 처리 및 열처리를 통하여 일함수를 높이는 연구가 진행 되어왔다(>5.0 eV). 하지만 현재의 대부분 연구는 후 처리된 박막의 일함수에 초점을 맞춰 연구가 진행 되어 박막의 nano-mechanical property에 대한 연구는 매우 부족하다. 따라서 본 논문에서는 AgOx 박막의 nano-mechanical property에 초점을 맞춰 분석을 실시하였다. 연구에 사용된 샘플은 Ag 박막을 유리기판 위에 rf-magnetron sputter 장치를 이용하여 100 W의 power로 150 nm 두께로 증착하였다. 증착된 Ag 박막은 $O_3$ 발생 UV 램프를 이용하여, 다양한 시간동안 UV 처리하였다(0~9분). 증착된 샘플은 Four-point probe, nanoindenter 장비를 이용하여 nano-mechanical property를 분석하였다. 실험 결과 UV 처리 시간이 0, 1분에서 면저항이 0.16, 0.50 ${\Omega}$/sq로 급격한 변화가 나타났으나, 반면 3분 이후 9분의 샘플의 경우, 0.55 ${\Omega}$/sq에서 0.24, 0.20, 0.15 ${\Omega}$/sq로 감소하여 전기적 특성변화를 볼 수 있었다. 또한 nanoindenting 결과 UV 처리한 박막의 극 표면 경도 값의 변화는 0~5분 처리한 샘플의 경우, 물리적인 경도가 증가하는 형태를 보이며 UV 처리를 5분간 했을때 7.89 GPa로 최고의 경도를 가진다. 그 이후부터는 6.97, 3.46 GPa의 결과로 박막의 경도가 감소되는 결과를 얻었다. 이러한 결과로부터 Ag 박막의 후처리에 따른 Ag 물질의 산화 및 결정상태에 따라 박막 내에 존재하는 residual stress를 분석할 수 있다.

• Management & Information Systems Review
• /
• v.35 no.3
• /
• pp.213-230
• /
• 2016

In O2O environment(Online-to-Offline), providers attract new customers via web sites and lead them to pay online, then induce them again to offline when receiving products. Thus, online and offline channel is integrated and create synergy for marketing in O2O context. As online and offline channel coexist in O2O, consumers' perceptions for products and services that providers offer cannot help being different compared to an independent channel (i.e., either online or offline). Therefore, this research aims to develop the O2O service quality model(O2O-SQ model). Especially, O2O is the unique environment where offline, online, and mobile commerce are integrated so that the current paper suggests the $1^{st}$ O2O-SQ model by integrating the common factors of offline, online, and mobile service quality model through the previous literature review. Hence, this study conducts FGI(Focus Group Interview) for customers who have experienced in purchasing products in O2O commerce. Among integrated common service quality factors of $1^{st}$ O2O-SQ model, the current paper identifies the specific service quality factors that customers perceive significantly through FGI analysis. Moreover, after extracting the unique O2O-SQ factors with this qualitative analysis and integrating with the $1^{st}$ O2O-SQ model, the paper develops the final O2O-SQ model.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2009

To investigate the alleviative effects of Peonia japonica water extract(PJWE) on inflammation and skin barrier damage, both the irradiation of UVB and the application of squalene monohydroperoxide (Sq-OOH) to the backs of hairless mice were performed for 4 weeks. And at the same time experimental materials were applied topically. The skin erythema indices for the positive control (PC, 0.01% retinoic acid) and experimental (E, PJWE) groups were lower than that of the control (C) group. Whereas both the lipid and water capacities for the PC and E groups were higher than those of the C group. Epidermis and dermis of the C group were remarkably thickened in comparison with the PC and E groups. Relatively much less number of inflammatory cells, including lymphocytes, neutrophils and macrophages were found in dermis of the PC and E groups compared with the C group. Lipid lamellae of the C group were broken severely showing an irregular arrangement and lipid content was much reduced. Whereas those of the PC and E groups were almost intact with a regular arrangement, which were similar to that of the N group. Taken the results all together, it was confirmed that PJWE could be effective natural herbal material for the alleviation of inflammation and skin barrier damage in hairless mice skin which were induced by UVB and Sq-OOH.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.263-268
• /
• 2004

Two species of halophilic bacteria were isolated from five salted seafoods and identified by 16S rDNA sequenc­ing homology. One was identified as Halomonas subglaciescola and other four strains were belong to Halomo­nas marina. The identity of all isolates with standard organisms was above $95\%.$ H. subglaciescola, H. marina IN, and H. marina SH-2 grew in salinity condition from $3%\;to\;18\%$ NaCl but growth of H. marina SQ and H. marina SH-l grew in salinity environment from $8\%\;to\;17\%.$ Maximum biomass of H. subglaciescola, H. marina IN, H. marina SQ, H. marina SH-1, and H. marina SH-2 growing in LB medium containing $15\%$ NaCl were about 3.2, 4.5, 4.5, 5.7, and 4.2, however the maximum biomass in LB medium containing $5\%$ NaCl were about 2.2, 1.1, 0.7, 0.2, and 2.4 as optical density at 660 nm, respectively. In scanning electron micrograph, unknown material (mucus) attached to outer membrane of all isolates was observed. When mucus isolated from halophilic bacterial cell was added to culture of E. coli, E. coli grew in medium containing $15\%$ NaCl.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.388-388
• /
• 2011

Graphene, with its unique physical and structural properties, has recently become a proving ground for various physical phenomena, and is a promising candidate for a variety of electronic device and flexible display applications. The physical properties of graphene depend directly on the thickness. These properties lead to the possibility of its application in high-performance transparent conducting films (TCFs). Compared to indium tin oxide (ITO) electrodes, which have a typical sheet resistance of ~60 ${\Omega}/sq$ and ~85% transmittance in the visible range, the chemical vapor deposition (CVD) synthesized graphene electrodes have a higher transmittance in the visible to IR region and are more robust under bending. Nevertheless, the lowest sheet resistance of the currently available CVD graphene electrodes is higher than that of ITO. Here, we report an ingenious strategy, irradiation of MeV electron beam (e-beam) at room temperature under ambient condition,for obtaining size-homogeneous gold nanoparticle decorated on graphene. The nano-particlization promoted by MeV e-beam irradiation was investigated by transmission electron microscopy, electron energy loss spectroscopy elemental mapping, and energy dispersive X-ray spectroscopy. These results clearly revealed that gold nanoparticle with 10~15 nm in mean size were decorated along the surface of the graphene after 1.0 MeV-e-beam irradiation. The fabrication high-performance TCF with optimized doping condition showed a sheet resistance of ~150 ${\Omega}/sq$ at 94% transmittance. A chemical transformation and charge transfer for the metal gold nanoparticle were systematically explored by X-ray photoelectron spectroscopy and Raman spectroscopy. This approach advances the numerous applications of graphene films as transparent conducting electrodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2818-2826
• /
• 2010

This research was conducted to develop a model appropriate for the measurement of information quality of UCC service site. The evaluation factors that reflect more improvement of the information utilization capability were verified. Enhancement of information utilization capability can control greater amount of information among the users and site companies, and among users. Therefore, Wikipedia, for example, provides a Web 2.0 based information quality that is more advanced than Web 1.0 by allowing effective control of information among the users. This type of information quality presents 'information reliability' and 'information stability' as evaluation factors added to the factors such as 'information sufficiency' and 'information usability.' Information reliability and information stability are essential factors that need to conduct an evaluation in the Web 2.0 environment that can distribute greater number of information in the environment where all the users serve as participants. Moreover, 'interesting information' and 'originality of information' suggests that information itself should include the attributes that can attract the attention of users, due to the nature of the Attention Economics, which points out one of the Web 2.0 phenomenon that the number of information consumers is smaller than that of information suppliers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1047-1049
• /
• 2003

Stibenequinone(SQ) derivative which was electronic transportation materials in Poly(N-vinylcarbazole) (PVK)-based on organic EL and an optical characteristic of organic EL which is mentioned previously was investigated. The Photoluminescence highest pick with blending TBSQ with PVK was shifted from 439nm to 517nm. This result indicates that an energy gap of a PVK/TBSQ blended sample is less than an energy gap of PVK. According to the electrochemistry characteristic, the ionization energy(Ip) and the electro affinity(Ea) decreased from 5.79eV to 5.63eV and 2.23eV to 2.63eV, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.228.1-228.1
• /
• 2014

투명전도성 산화물(TCO,Transparent Conductive Oxide) 물질로 널리 사용되는 ITO 박막은 산화물 반도체를 평판 디스플레이용 투명전극 재료로 개발하기 위한 많은 연구가 진행되고 있다. ITO (Indium tin oxide)는 약 3.5 eV 정도의 넓은 밴드갭을 가진 축퇴반도체로서 전기적 및 광학적 특성이 우수하기 때문에 대표적 투명전도성 박막으로 가장 많이 사용되고 있다.현재 양산화된 ITO의 조성비는 90:10WT%인 타겟을 사용하는대 투명전극은 비저항이 $1{\times}10-3{\Omega}/sq$이하로 면저항이 $103{\Omega}/sq$전기전도성이 우수하고 380에서 780 nm의 가시광선 영역에서의 투과율이 80% 이상이라는 두 가지 성질을 만족시키는 박막이다. 본 실험에서는 SnO2 1~5wt% 인 ITO타겟을 제작하고 RF-Magnetron Sputtering을 사용하여 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대면적 공정이 가능한 RF-magnetron sputtering방법으로 기판인 Slide glass위에 ITO를 증착하여 광학적 특성 및 전기적 특성에 대하여 측정하였다. 전기적, 광학적 특성 등 XRD을 통해 분석하였다. 그리고 증착된 모든 ITO 박막에서 가시광 투과율을 측정하기 위해 UV-Vis spectrophptometer을 이용하여 분석한 결과 90%이상의 높은 투과율이 측정되었다. ITO박막은 Anti-Fogging, Self-Cleaning, Solar cell 및 디스플레이소자 등 다양한 산업에 이용 가능할 것으로 생각된다.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.315-324
• /
• 1990

저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.195-196
• /
• 2005

In recent years, as the needs of MOS's a high quality is desired to get the superior electrical characteristics and reliability on MOSFET. As an alternative gate dielectric have drawn considerable alternation due to their superior performance and reliability properties over MOSFET, 2'nd silicidation formation process has been proposed as a dielectric growth/annealing process. In this study the author observed process characteristics on MOS structure. In view points of the process characteristics of MOS capacitor, the oxygen & polysilicon was analyzed by SIMS analysis on l'st & 2'nd Ti process, the oxygen and Si2 contents[Count/sec] of 1.5e3 & 3.75e4 on l'st process and l.1e3 & 2.94e4 on 2'nd process, the Ti contents' of 8.2e18 & 6.5e18 on 1'st and 2'nd process. The sheet resistance[$\Omega/sq.$] was 4.5 & 4.0, the film stress[dyne/cm 2] of 1.09e10 & 1.075e10 on l'st and 2'nd process. I could achieved the superior MOS characteristics by 2'nd silicidation process.