• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.86-93
• /
• 2001

For solving the environmental problem of the waste EPDM and for new TPE blend materials, we developed a new kind of TPE material using a co-rotating twin screw extruder. To improve the mechanical properties of TPE material such as tensile strength, elongation at break, and modulus of the blend, PP and waste EPDM powder were blended with different screw configurations. The mechanical properties of the blends and morphology of the TPE were investigated. As the number of kneading disc and left-handed screw element increased, dynamic vulcanization of the material was increased because the shear stress and residence time of blends increased.

• Elastomers and Composites
• /
• v.30 no.1
• /
• pp.20-31
• /
• 1995

The purpose of this study is to investigate the reinforcement of inorganic filler silica, treated by MDI about SBR vulcanizate. The characteristics of vulcanization, physical properties, surface properties and dynamic properties were investigated after mixing those silica with SBR and unmodified silica with SBR. In this experiment only the quantity of silica was variable. In the vulcanization characteristics tested by rheometer, S-series showed the fastest scorch $time(t_{10})$ and optimum cure $time(t_{90})$. And in test or tensile characteristics hardness, tensile strength, 100%, 300% modulus and elongation were all appeared in the order of M>S-series. The characteristic bonding of urea between unmodified silica and MDI could be confirmed in IR spectrum. The shapes of silicas treated chemically were observed by SEM. And the dispersion of the filler in the SBR composite was uniform. In the dynamic characteristics by the RDS, the order of elastic modulus G' values was as follows : M>S-series, and also the order of damping values was as follows : M>S-series.

• Elastomers and Composites
• /
• v.30 no.3
• /
• pp.207-217
• /
• 1995

The reinforcement of Inorganic filler silica treated with LBR-MDI In SBR vulcanizates were Investigated. The inorganic filler silica treated with MDI on unmodified surface and that of silica treated by MDI was retreated with LBR. The charateristics of vulcanization, physical properties, surface properites and dynamic properties were investigated after mixing those silica with SBR and unmodified silica with SBR. Rheometric studies of the vulcanization showed that S-series has fast scorch $time(t_{10})$ and an optimum cure $time(t_{90})$ in the SBR compounds. And it was turned out that SBR vulcanizates compounded with LBR treated silica was better than any other componnds in hardness, tensile strenght, 100 300% modula and elongation. We could confirm that urea bonding is formed from IR spectrum. We concluded that L-series shows the best reinforcement effect in SBR vulcanizates.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.54-64
• /
• 2012

Acrylonitrile was introduced in the emulsion SBR to increase compatibility between silica and rubber. AN-SBR/silica compounds showed faster vulcanization time and higher delta torque values than SBR 1721/silica compounds because interaction between nitrile group of AN-SBR and silanol group on the silica surface could make hydrogen bond that prevented adsorption of the accelerator on the silica surface, which improved the vulcanization reaction efficiency and enhanced the degree of crosslinking. AN-SBR/silica compound showed higher values in minimum torque than SBR 1721/silica compound during the vulcanization because AN-SBR has higher molecular weight than SBR 1721 in the raw material. When PEG was added to the SBR 1721 and AN-SBR compounds, vulcanization time was faster than SBR 1721 and AN-SBR compounds without PEG because PEG has a large number of ether linkages which show high compatibility with silanol group on the silica surface that prevented the adsorption of the accelerator and the ingredients on the silica surface, which improved the vulcanization reaction efficiency. In the mechanical properties, AN-SBR compounds showed higher modulus values at 100%, 300% than SBR 1721 compounds because interaction between nitrile group of AN-SBR and silanol group on the silica surface enhanced the degree of crosslinking. In the dynamic properties, AN-SBR compounds showed lower tan ${\delta}$ values at $0^{\circ}C$ than SBR 1721 compounds in accordance with the $T_g$ values. AN-SBR compounds showed lower tan ${\delta}$ values at $60^{\circ}C$ than SBR 1721 compounds because interaction between acrylonitrile and silica caused strong filler-rubber interaction that induced low energy dissipation by the filler-filler interaction.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.150-157
• /
• 2018

Fatigue properties of rubber are one of the most important characteristics in the rubber industry. In this study, the fatigue properties of MREs (magneto-rheological elastomers) based on NR (natural rubber), EPDM (ethylene-propylene diene monomer), and AEM (ethylene/acrylic elastomer) were investigated. For comparison, MREs with a Shore hardness of 60A were prepared. According to the relative results, the fatigue properties of EPDM MRE were the worst. Thus, we investigated methods to improve the fatigue properties of EPDM MRE by varying the carbon black content and curing systems of EPDM as the matrix of the MRE. Dynamic properties were measured using a fatigue tester and an RPA (rubber process analyzer), and the XPS (X-ray photoelectron spectroscopy) was used to analyze the curing system of the EPDM matrix. According to the results, the Payne effect increased and the fatigue resistance decreased as the carbon black content increased. In case of the curing system, the CV (conventional vulcanization) system was superior to the EV (efficient vulcanization) system in terms of the fatigue resistance. This was because the number of flexible bonds in the case of the CV system was higher than that in the case of the EV system. However, the EV system showed excellent mechanical properties because it had many monosulfidic bonds with strong binding energy.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.215-221
• /
• 2020

Silica/SBR (styrene-butadiene rubber) compounds are the primary constituents of tire treads. Furthermore, the excellent dynamic viscoelastic properties of silica lead to good fuel efficiencies. However, the silanol group on the surface of silica does not mix well with non-polar rubber because of its polarity. This incompatibility causes aggregation due to the occurrence of hydrogen bonding between the hydroxyl groups, thereby reducing the dispersibility of silica. Recently, the wet master batch (WMB) process has been applied to overcome these disadvantages, and research on silica dispersants that can be used in the WMB process has been increasing. In this study, we prepared silica/SBR compounds by using three types of eco-friendly cellulose-based dispersants in the WMB process, namely: cellulose-, sodium carboxymethyl cellulose, and nanocellulose-based dispersants. Subsequently, we compared the vulcanization characteristics, viscoelastic properties, and mechanical properties of the compounds. The silica dispersibility in the rubber compounds was improved with the addition of the nano-cellulose dispersant, resulting in the enhancement of the workability, hardness, tensile strength, and wear resistance of the SBR compound.

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2001

To see the effect of chemical surface modification, the carbon black surfaces were treated with three types of chemicals (KOH, $H_3PO_4$, and benzene). Vulcanization and mechanical properties of a styrene-butadiene rubber (SBR) were investigated depending on the chemical treatments. The surface free energy increased considerably with the treatments by both the acid (HCB) and base (KCB), but only a slight increase was observed for benzene treatment(BCB). The BCB showed the highest level of the London dispersive component. The vulcanization reaction was found to be faster in the order of KCB-SBR> BCB-SBR> VCB-SBR(virgin) > HCB-SBR. The difference in minimum and maximum torque of rheocurve, representing the degree of crosslinking, was found to be higher for the BCB-SBR compared to those of VCB-SBR, KCB-SBR, and HCB-SBR. The BCB-SBR and KCB-SBR showed the improved tensile and dynamic mechanical properties. A linear relationship was found to exist between the London dispersive component of surface free energy and mechanical properties.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.201-208
• /
• 2013

In this study, effect of different amounts of sulfur and vulcanization accelerators in the acrylonitrile styrene-butadiene rubber (AN-SBR)/silica compounds on the properties of tire tread compound were studied. As a result, cure rate and degree of cross-linking of the compounds were increased due to enhanced cross-linking reactivity by the increased amounts of sulfur and vulcanization accelerators. Also, abrasion resistance and the mechanical properties such as hardness and modulus of the compounds were improved by enhanced degree of cross-linking of the compounds. For the dynamic properties, tan ${\delta}$ value at $0^{\circ}C$ was increased due to the increase of glass transition temperature ($T_g$) by enhanced degree of cross-linking of the compound, and tan ${\delta}$ value at $60^{\circ}C$ was decreased. Initial cure time ($t_1$) showed the linear relationship with tan ${\delta}$ value at $60^{\circ}C$. This result is attributed that reduced initial cure time ($t_1$) of compounds by applying increased amount of curatives can form cross-linking in early stage of vulcanization that may suppress development of filler network. This result is verified by observation on the surface of annealed compounds using AFM (atomic force microscopy). Consequently, decreased initial cure time is considered a very important parameter to reduce tan ${\delta}$ at $60^{\circ}C$ through reduced re-agglomeration of silica particles.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.245-251
• /
• 2006

Thermoplastic elastomer was prepared from dynamical vulcanization of isotactic polypropylene(iPP)/nitrile rubber blend (NBR/iPP=70/30 wt/wt) in an internal mixer using dicumyl peroxide (DCP) as a curing agent and zinc dimethacrylate (ZDMA) as a coagent. There was a great improvement in tensile and tear strength, elongation-at-break and lower tension set when ZDMA was incorporated into the blend, which is supposed to be due to the increase in crosslink density or the rubber phase and the reduction in size of the rubber particles. It was revealed that the dynamically vulcanized blend exhibited good reprocessibility, indicating its thermoplastic nature.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.184-190
• /
• 2020

In the wet master batch process, process oil is used to improve the workability of silica-SBR. The process oil expands the polymer and provides lubrication to soften the stiff rubber chain. However, addition of excess process oil can interfere in the crosslinking reaction between rubber molecules and reduce the crosslinking density of silica-SBR. Controlling the amount of process oil is an important aspect for properly controlling the workability and crosslinking density of silica-SBR. In this study, silica-SBR was prepared by adjusting the amount of process oil to confirm its effect on silicaSBR. Vulcanization characteristics of silica-SBR were examined using a moving die rheometer. Dynamic viscoelasticity was measured using a dynamic mechanical thermal analyzer, and the mechanical properties were investigated using the universal testing machine according to ASTM D412. As a result, all silica-SBR compounds with 10 to 40 phr of process oil have effects of improving the processability and the silica dispersibility. Also, the optimum condition was determined when 10 phr of processed oil was added because the abrasion resistance was improved 65% compared to that at 40 phr.