• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.5
• /
• pp.103-111
• /
• 2008

This study proposes a technique to estimate the material property of a paper by using an experimental methods and commercial CAE software. Under gravitation, if one side of the paper is attached to the ground, the opposite side of paper is largely deformed, and vibrates freely. Since the paper has an orthotropic characteristic due to its treatment, the deformations in two orthogonal directions of the dry paper are different. An experimental method to measure the static deformation of the paper introduces this phenomenon. And dynamic behavior, frequency of free vibration is measured. And then. virtual prototypes that can represent the static and dynamic behavior are modeled by using the commercial CAE software $RecurDyn^{MT}$/MTT3D, which has been widely used by the printer makers. While comparing the deformation and frequency from the experiment and simulation, a design optimization technique in the commercial CAE software of R-INOPL, $RecurDyn^{TM}$/AutoDesign is used to estimate the material property such as Young's modulus, shear modulus and density of the paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.302-304
• /
• 2016

In this paper, we propose the profile processing algorithm based on in-life sports contents. The proposed algorithm is required research for recommending to sport for all contents, and is preceding research to improve reliability of recommendation. So the proposed algorithm processing dynamic profile based on dynamic information for recommendation, and processing weight values that depending on dynamic recommendation classification. The proposed profile processing algorithm is expected to improve satisfaction of contents recommendation.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.331-341
• /
• 2002

Traditional slicing techniques make slices through dependence graph and improve the accuracy of slices. However, traditional slicing techniques require many vertices and edges in order to express a data communication link because they are based on static slicing techniques. Therefore the graph becomes very complicated. We propose the representation of a dynamic system dependence graph so as to process the slicing of a software system that is composed of related programs in order to process certain jobs. We also propose programs on efficient slicing algorithm using relations of relative tables in order to compute dynamic slices of a software system. Using a marking table from results of the proposed algorithm can make dynamic system dependence graph for dynamic slice generation. Tracing this graph can generate final slices. We have illustrated our example with C program environment. Consequently, the efficiency of the proposed dynamic system dependence graph technique is also compared with the dependence graph techniques discussed previously. As the results, this is certifying that the dynamic system dependence graph is more efficient in comparison with system dependence graph.

• Journal of Computing Science and Engineering
• /
• v.6 no.2
• /
• pp.79-88
• /
• 2012

Power continues to be a driving force in central processing units (CPU) design. Most of the advanced breakthroughs in power have been in a realm that is applicable to workstation CPUs. Advanced power management systems will manage temperature, dynamic voltage scaling and dynamic frequency scaling in a CPU. The use of power management systems for microcontrollers and embedded CPUs has been modest, and mostly focuses on very large scale integration (VLSI) level optimizations compared to system level optimizations. In this paper, a dynamic frequency controlling (DFC) technique is introduced, to lay the foundation of a system level power management system for commercial microcontrollers. The DFC technique allows a commercial microcontroller to have minor modifications on both the hardware and software side, to allow the clock frequency to change to save power; results in this study show a 10% savings. By adding an additional layer of software abstraction at the interrupt level, the microcontroller can operate without having knowledge of the current clock frequency, and this can be accomplished without having to use an embedded operating system.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.277-282
• /
• 2004

This paper concerns about dynamic analysis of an underwater test miner, which operates on cohesive soil. The test miner consists of tracked vehicle and pick-up. device. The motion oj pick-up device relative to the vehicle chassis is controlled by two pairs of hydraulic cylinders. The test miner is modeled by means of a commercial software. A terramechanics model of cohesive soft soil is implemented to the software and applied to dynamic analysis of the test miner model. The dynamic responses of test miner are studied with respect to of four different types of terrain conditions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.6
• /
• pp.477-487
• /
• 2005

As embedded system grows in size and complexity, the importance of the technique for dynamic memory allocation has increased. The objective of this paper is to measure the performance of dynamic memory allocation by varying both hardware and software design parameters for embedded systems. Unlike torrent performance evaluation studies that have presumed the single threaded system with single address spate without OS support, our study adopts realistic environment where the embedded system runs on Linux OS. This paper contains the experimental performance analyses of dynamic memory allocation method by investigating the effects of each software layer and some hardware design parameters. Our quantitative results tan be used to help system designers design high performance, low power embedded systems.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.473-479
• /
• 2009

Dynamic analysis is necessary for the High-Speed Railway vehicle which aims to run on max 400km/h. Especially, dynamic simulation using CAE(Computer Aided Engineering) can help to reduce the time of development of the High-Speed Railway vehicles. Also, it helps to reduce prices and improve the quality such as safety, stability and ride. There are many dynamic software for a railway vehicle, such as Vampire and ADAMS-Rail. There are limitations for each software and difficulties to analyze overall dynamics for entire railway system. To overcome these limitations, in this study, a program which can simulate entire railway vehicles was developed. This program is easy to use because it was developed using C++, which is object-oriented programming language. In addition, the basic platform for the development of dynamic solver is prepared using the nodal, modal coordinate system with a wheel-rail contact module. Rigid, flexible and large deformable body systems can be modeled by a user according to the characteristic of a desired system. Its reliability is verified by comparison with a commercial analysis program.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.253-259
• /
• 1997

A software for design of turbine bearings has been developed based on both the theoretical analysis and experimental investigation. Static and dynamic performance, i.e. load capacity, frictional loss, temperature distribution, stiffness and damping coefficients, stability etc., can be obtained by using this software taking into account the effects of three dimensional variation of lubricant viscosity, turbulence and inlet pressure. A performance test rig was developed by self-design and technology, which was used to verify static and dynamic characteristics and to investigate the proper boundary conditions for theoretical analysis. Consequently HANJUNG has developed the self-design technology for design of turbine bearings for power plants.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2350-2352
• /
• 2004

This paper presents the implementation-tation of the real-time software GPS Receiver based on FFT and FLL assisted PLL tracking algorithm. The FFT(fast fourier transform) based GPS si-gnal acquisition scheme provides a fast TTFF(time to first fix) performance. The tracking based on FLL assisted PLL enables tracking of GPS signal in a high dynamic environment. The designed software GPS receiver uses the indexing method for generating replica carrier to reduce computation load. The performance of the implemented GPS receiver is evaluated using high-dynamic simulated data from a simulator and real static data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4379-4397
• /
• 2017

Three different improvements of the Velocity-based model were proposed in a minimal velocity-based pedestrian model. The improvements of the models are based on the different agent forms. The different representations of the agent lead to different results, in this paper, we simulated the pedestrian movements in some typical scenes by using different agent forms, and the agent forms included the circles with different radiuses, the ellipse and the multi-circle stand for one pedestrian. We have proposed a novel model of pedestrian dynamics to optimize the simulation. Our model specifies the pedestrian behavior using a dynamic ellipse, which is parameterized by their velocity and can improve the simulaton accuracy. We found a representation of the pedestrian much closer to the reality. The phenomena of the self-organization can be observable in the improved models.