• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.101-108
• /
• 2008

The dynamic behavior of railway bridges originates from dynamic properties of various spans and structural types. As a result, the exact estimation of dynamic properties of the railway bridge can produce the exact estimations of dynamic performances of the railway bridge. The damping ratio affects the dynamic reponses of the railway bridge in the vicinity of the critical speed seriously. Eurocode, National Annex of each European country and Japan have their own specification for the damping ratio for the estimation of dynamic performance of railway bridges. In our case, the specification for Honam high speed railways follows the Eurocode. In the present study, for the verification and regulation of the damping ratio and investigation of various dynamic properties, modal tests of various structural types are performed. In addition, for the investigation of effects of track structures on the dynamic property of the bridge, ballast track and concrete track are installed and tested.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.520-525
• /
• 2003

This article provides a dynamic modeling methodology of engines to be accurate with a small number of degrees of freedom for an active vibration control using a top bracing. First. a finite element (FE) model for the engine structure is constructed so that the size of model is as small as possible where the dynamic characteristics of engine are ensured. Second. a technique is studied to obtain the exact mass and stiffness matrices of the FE model. The size of matrices from the FE model is still too large to apply. Finally, a model reduction is. therefore. conducted to make an appropriate dynamic model for designing and simulating a top bracing. In this article, a dynamic model of a large 9 cylinder engine is constructed and reviewed by comparing its natural frequencies and steady state reponses with those of experimental data provided by manufacturer.

• 전산구조공학
• /
• 제2권2호
• /
• pp.53-62
• /
• 1989

최근에 원유와 석유제품을 저장하기 위한 지하공동의 필요성이 급증하고 있다. 지하저장공동의 동적응답을 구하기 위하여 재료비선형(탄.점소성)과 기하학적 비선형 효과를 모두 고려한 프로그램 VISDYN을 작성하여 그 유효성을 확인하였다. 프로그램 VISDIN을 이용하여 지하저장 공동의 탄.점소성 동적해석을 수행한 결과 공동을 굴착한 후 지반이 안정상태에 도달한 때의 변위와 굴착 직후의 변위는, 동적인 변위 응답에서는 차이가 거의 없음을 알 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.45-48
• /
• 2007

The aim of this study is to estimate the compressive force of steel member using a system identification technique with vibration measurements. To date, several methods have been presented to estimate the compressive force using static and/or dynamic responses of the steel member. However, each and every one of these methods has its disadvantages as well as advantages in its procedures, level of accuracy, and equipment requirements. The paper reports a qualitative investigation of vibration under monoharmonic excitation. The methodology utilizes the relationship between the natural frequencies, the structural parameters, and the compressive force of the member. In this paper, experimental results are presented with a steel beam subjecting to several compressive forces and the proposed method is validated using both numerical and experimental data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.175-180
• /
• 2002

Loading/Unloading(L/UL) mechanism has been considered to be an alternative to contact start-stop(CSS) mechanism which eliminates stiction and wear associated with frequent start and stop process. It has other advantages including increased areal density due to lower flying height, reduced power consumption, and improved shock resistance. In order for L/UL to be Implemented in Near-field recording system properly, dynamics of optical flying head must be understood and optimized. In this paper the dynamic characteristics during loading process is analyzed numerically to investigate the effect of design parameters such as loading speed. slider shape, and initia conditions on the dynamic reponses of flying head..

• 대한의용생체공학회:의공학회지
• /
• 제30권6호
• /
• pp.495-502
• /
• 2009

This paper investigated the effects of dynamic postural control for maintaining upright standing on a support surface during continuous sinusoidal horizontal translation in anterior-posterior direction. 15 healthy young subjects participated in this experiment. The analysis of body movement was analyzed using Ariel Performance Analysis System. Motion pattern was analyzed by seven markers on subject's body. Position of markers were head, chest, hip, right knee, left knee, right ankle and left ankle. Seven different frequencies of support surface were employed ; 0.1, 0.25, 0.5, 0.75, 1, 1.5 and 2Hz at 2cm of moving path of motionbase. The experiments were performed dynamic postural reponses at the condition of eye open. The results showed that median frequency of the knee, ankle were increased in all frequency bands. Following the frequency of perturbation increased, postural control strategy was changed from ankle strategy to combined strategy. The experiment results could be applied to the dynamic postural training for the elderly and the rehabilitation training for the patients to improving the ability of postural control.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.49-54
• /
• 2003

우리나라가 세계 물류기지의 중심 국으로 발전하기 위해서는 날로 급증하고 있는 물류량을 처리하기 위한 항만의 건성이 시급한 과제이다. 국토가 좁고 대도기에 인구가 급증하고 있으나 삼면이 바라도 둘러 쌓여 잇는 우리나라의 경우에는 해양공간개발이 필요하다. 증가하는 물류량은 처리할 수 있는 항만의 건설을 위하여 본 연구에서는 초대형 부유채식 컨테이너 야드를 제안하고 해상에 설치되는 초대형 부유채식 컨테이너 야드가 파의 길이 , 해역의 수심, 입사하는 파의 방향등에 따라서 어떠한 응답특성을 나타내는지 파악한다.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.95-104
• /
• 2008

본 연구에서는 경부고속철도상의 대표적인 교량인 2경간 연속보 형태의 고속철도 교량에 대하여 동적거동을 해석하고 공진발생의 감소방안들을 제시하였다. 하중은 한국형 고속철도하중인 총길이 380.15 m의 TGV-K 열차(2P+18T)가 일정한 속도로 이동하는 것으로 하였다. 동적거동을 모사하는 지배방정식은 질량과 강성이 분포된 연속계에서 만들어진 편미분방정식을 이용하여 구하였으며 Duhamel 적분을 이용한 모달계수의 처리를 수반하는 모드중첩법을 이용하여 동적해석을 수행하였다. 열차의 주행속도에 관계없이 동적거동을 급격히 감소시킬 수 있는 지간장이 존재하였으며 지금까지 연구된 단순보 형태의 교량에서 분석된 결과와는 달랐다. 열차의 주행속도에 의존하여 동적응답이 급격히 증가되어 공진현상을 일으키는 경우에도 공진을 감소시킬 수 있는 여러 방안들을 제시하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.185-192
• /
• 2005

Using existing static methods, it is possible to estimate accurately the reponses of structures governed by the fundamental mode. However, these methods do not provide reliable estimates for the structure where higher mode effects are significant. Parametric study was performed to analyze the dynamic characteristics of the structure with long vibration period. Based on the investigations, a new modal combination method using modal combination coefficients, Factored Modal Combination, was developed, and static earthquake load patterns addressing higher mode effects reasonably were proposed. Existing modal combination methods, such as SRSS and CQC, lack a theoretical basis to be applied to inelastic structures. In contrast, the proposed method can be applied conveniently in inelastic range as well as in elastic range.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.318-324
• /
• 2004

The stability of a simply supported straight pipe is investigated. The time dependent flow is assumed to vary harmonically about a constant mean velocity. Stability conditions and dynamic reponses of a governing equation are conducted by use of multiple scale mettled. Parametric resonances and combination resonances are investigated. Stability boundaries are analytically determined. The resulted stability conditions show that instabilities exist when the frequency of flow fluctuation is close to two times the natural frequency or to the sum of any two natural frequencies. In case that the fluctuated flow frequency is close to zero or to the difference of two natural frequencies, however, instabilities are not found up to the first order of perturbation. Stability charts are numerically Presented fir the first two vibration modes.