• KSTLE International Journal
• /
• 제7권2호
• /
• pp.27-34
• /
• 2006

Knudsen number is the ratio of molecular mean free path versus mm thickness and the criterion to determine the flow form. When its value is lower than 0.01, the flow can be assumed to has no slip boundary condition. And in the case that the value is between 0.01 and 10, then the flow has slip boundary condition at both the adjacent walls. The condition of the air flow between the rotating journal and top foil in the air foil bearing is determined by the rotating speed and load, and the Knudsen number is also varied by those values. Because the molecular mean free path is variable to the pressure and temperature, more exact formulation is necessary to understand and analyze the flow regime. In this study, the analysis considering Knudsen number formulated with those variables (pressure, temperature and mm thickness) was executed. The approximate value was examined using the equation to confirm whether the flow has the slip or no-slip boundary condition. From the analytic investigation, it was decided to range approximately 0.01 to 1.0 and the flow can be supposed to have the slip boundary condition. Under the condition of the slip flow, the static characteristics of the air foil bearing were examined using modified Reynolds equations. The results were compared with those considering no slip condition. It shows that the slip condition makes the flow decelerates and the load carrying capacity decreases compared with no slip condition. And as the bearing number and eccentricity ratio increase, the load carrying capacity also increased at both the cases. From this result, it can be supposed that the bearing torque also increases. In the analysis of the dynamic characteristics, the perturbed Knudsen number was taken into consideration. Because the Knudsen number is expressed as the terms of each variable, the perturbed equation can be simply derived. The results of both cases considering and not considering Knudsen number were compared each other. In the case of the direct terms of the stiffness and damping coefficients, the difference between both cases was little and increased as the bearing number and eccentricity ratio increased. And the cross terms have less or more differences.

• 항공우주기술
• /
• 제11권2호
• /
• pp.109-116
• /
• 2012

우주발사체의 액체추진공급시스템에서 사용되는 연료 벤트/릴리프밸브는 안전밸브의 조합체로 지상에서 연료를 주입할 때와 비행 중에 추진제 탱크의 과압을 해소하는 역할을 한다. 벤트/릴리프밸브는 구동가스 공급에 의해 벤트밸브를 작동시키는 벤트모드와 설정된 압력을 유지하기 위해 자동으로 밸브를 개폐하는 릴리프모드로 작동한다. 본 논문에서는 해외발사체에 사용된(Saturn) 벤트/릴리프밸브 샘플을 이용하여 한국형발사체의 규격에 적용한 밸브 설계를 검토하였다. 또한 설계 검증 및 기본적인 작동 특성을 분석하기 위해 AMESim 상용코드를 이용하여 해석 모델을 구성하였다. 밸브 모델을 이용해서 동특성 해석을 수행하여 설계 변수에 대해 밸브 개폐 작동시간, 작동성능, 개폐압력을 예상하였다. 이를 통해 연료 벤트/릴리프밸브 설계변수에 따른 작동성을 파악하여 시제품 제작 전 의 상세설계 및 설계 경계조건을 제시하였다.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.27-34
• /
• 1989

부분 캐비티가 발생한 2차원 수중익 문제를 해결하기 위하여 포텐시얼을 기저로 한 양력판 이론이 정식화 되었다. 본 이론은 수중익 표면에 다이폴과 쏘오스를 분포함으로써 각각 양력 및 캐비티 문제를 표현하고 있다. 날개표면의 접수부에서의 운동학적 경계조건은 날개의 내부유동에서의 전체 포텐시얼이 영이 된다는 대등한 조건으로 만족되었다. 캐비티 표면에서의 역학적 경계조건은 압력이 일정하다는 즉 속도가 일정하다는 조건을 거쳐 포텐시얼이 선형적으로 변한다는 조건으로 대치되었으며, 운동학적 조건은 특이함수의 세기가 결정된 후에 적분에 의하여 캐비티의 형상을 구하는데에 사용되었다. 따라서 Green 정리를 사용하면, 속도를 기저로 하는 통상적인 정식화가 아닌, 포텐시얼을 기저로 한 경계치 문제가 완성된다. 또한 수중익의 정확한 표면에 특이함수를 분포함으로써, 날개두께가 영인 수중익 신경 이론에 비하여, 날개표면에서의 압력분포의 정도를(특히 날개 앞날부근에서) 향상시켰다. 본 이론에서는 캐비티 길이를 가정하고 이에 대응하는 캐비티의 모양과 캐비테이션수를 계산하였다. 계산정도의 향상을 위하여 약 5회정도의 반복계산이 필요하지만 공학적 목적을 위해서는 2회의 반복계산이 충분함을 보였다.

• 대한조선학회논문집
• /
• 제38권1호
• /
• pp.1-8
• /
• 2001

본 논문에서는 비압축성 Reynolds-Averaged Navier-Stokes 방정식을 수치 해석하여 자유표면을 포함한 선체 주위의 난류 유동을 계산하였다. 정규격자 상에서 공간의 이산화는 2차 정도의 유한차분법을, 시간의 적분에는 4단계 Runge-Kutta법을 이용하였고, 난류 닫힘 조건을 만족시키기 위해 Baldwin-Lomax 난류 모형을 사용하였다. 자유표면의 위치는 운동학적 경계조건식을 Lax-Wendroff법으로 풀어서 구하였고, 자유표면과 격자 경계면을 일치시키기 위해 매 시간마다 새로 계산된 자유표면 위치에 맞추어 격자를 새로 구성하였다. 속도와 압력에 대한 경계조건은 자유표면에서 점성을 무시하여 근사한 동역학적 조건을 적용해서 구하였다. 본 연구에서 개발된 수치해법을 검증하기 위하여 실험자료가 많은 Wigley 선형과 Sries 60 $C_B=0.6$ 선형에 대해 수치계산을 수행하였고 계산된 선체 주위의 파형이 실험 결과와 잘 일치하는 것을 확인하였다.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.15-26
• /
• 1990

본 연구는 표면 양력관 이론을 이용하여 초월 공동이 발생한 2차원 날개의 유동해석을 위한 제반 경계 조건을 검증하고 공동 뒷부분의 모형을 비교 검토한다. 해석해가 존재하는 2차원 대칭 스트럿 주위의 초월 공동 현상을 수치적으로 해석하여 그 결과를 해석해와 비교함으로써 표면 양력판 이론에 의한 프로펠러 공동 문제 해석의 가능성을 입증하였다. 특히, 공동 뒷부분의 비 선형 닫힘 모형, 타원형 닫힘 모형, 그리고 선형 닫힘 조건을 서로 비교 분석함으로써 공동 문제 해결에서 가장 중요한 공동 닫힘 조건의 영향을 보였다.

• Journal of Welding and Joining
• /
• 제24권2호
• /
• pp.71-78
• /
• 2006

It has been reported that good quality weld beads are not easily obtained during the $CO_2$ CW laser welding of primer coated plate. However, by introducing a small gap clearance in the lap position, the zinc vapor can escape through it and sound weld beads can be acquired. Therefore, this study examines for keyhole behavior by observing the laser-induced plasma and investigates the relation between keyhole behavior and formation of weld defect. Laser-induced plasma has accompanied with the vaporizing pressure of zinc ejecting from keyhole to surface of primer coated plate. This dynamic behavior of plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser welding. As a result of observing the composition of porosity, much of Zn element was found from inner surface of porosity. But Zn was not found from the dimple structure fractured at the weld metal. By analyzing of vaporizing element in laser welding, a component ratio of Zn was decreased by introducing a small gap clearance. Therefore we can prove that the major cause of porosity is the vaporization of primer in lap position. Mechanism of porosity-formation is that the primer vaporized from the lap position accelerates dynamic behavior of the key hole and the bubble separated from the key hole is trapped in the solidification boundary and romaines as porosity.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.23-29
• /
• 2017

In this study, a flexible multi-body dynamic simulation model of a knuckle boom crane is developed to evaluate the stress of spindle and rack gears under dynamic working conditions. It is difficult to predict potential critical damage to a knuckle boom crane if only the static condition is considered during the development process. To solve this issue, a severe working scenario (high speed with heavy load) was simulated as a boundary condition for testing the integrity of the dynamic simulation model. The crane gear model is defined as a flexible body so contact analysis was performed. The functional motion of a knuckle boom crane is generated by applying forces at each end of the rack gear, which was converted from hydraulic pressure measured for the experiment. The bending and contact stress of gears are theoretically calculated to validate the simulation model. In the simulation, the maximum stress of spindle and rack gears are observed when the crane abruptly stops. Peak impact force is produced at the contact interface between pinion and rack gears due to the inertia force of the boom. However, the maximum stress (bending/contact) of spindle and rack are under the yield stress, which is safe from damage. By using the developed simulation model, the experiment process is expected to be minimized.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.451-458
• /
• 2001

The purpose of this study was to evaluate shear parameters on cutting slope of weathered granite soils by using small dynamic cone penetration test on the very moment of its cutting. The results were : On the relations among N$\_$c/, Li, and CEC, the condition of Li＞6%, CEC＞14(meq/100g) corresponds to that of N$\_$c/ values of 2∼30, and 3＜CEC＜14(meq/100g) to N$\_$c/=30∼50. Comparing the smallest penetration depth from two small dynamic cone penetration tests done at 5m below from the top of the slope on April 15th, October 31t. there was a l0cm difference. So we could find out the degree of weathering on the slope. And dividing the difference by 190 days (the whole testing time), we could know it's being weathered 0.052mm each day. The more N. value increases, the more shear parameters(internal friction angle ; $\phi$, cohesion : c) increase at a standard pressure($\sigma$＞32㎪). So the condition of N$\_$c/=2∼50 corresponds to that of $\phi$=27∼50, c=12∼49㎪. From the above testing results, the N$\_$c/ values more correspond to $\phi$ values than c values. In conclusion, this study suggests that on small dynamic cone penetration test a penetration boundary line of 5 centimeters is decided at around Li=4%, CEC=3(meq/100g) which is classified as a strong weathering soil. It also shows that as Li increases CEC increases as well, while N$\_$c/ decreases.

• 한국운동역학회지
• /
• 제34권2호
• /
• pp.93-103
• /
• 2024

Objective: The purpose of this study was to investigate whether dancers with chronic ankle instability (CAI) exhibit different characteristics in dynamic postural control ability and ankle joint laxity compared to dancers without CAI and non-dancers with CAI. Method: Twelve dancers with CAI, 14 dancers without CAI, and 12 non-dancers with CAI participated in the study. Dynamic balance was evaluated using the Star Excursion Balance Test (SEBT) and the single-leg hop balance. The laxity of the ankle joint was evaluated through the anterior drawer test and the talar tilt test. SEBT measured maximum reach distances in anterior, posteromedial, and posterolateral directions. Single-leg hop assessed center of pressure (COP) and time-to-boundary (TTB) outcomes. One-way ANOVA and Chi-square tests were performed to compare the outcome variables among the three groups. Results: Dancers with CAI demonstrated greater reach distance in the posterolateral direction compared to non-dancers with CAI during SEBT (p=.014). Secondly, dancers without CAI showed greater reach distance in the posterolateral (p<.001) and posteromedial (p=.001) directions during SEBT compared to non-dancers with CAI. Additionally, dancers without CAI exhibited better postural control with higher TTB AP mean of minima (p=.003) and TTB AP standard deviation of minima (p=.012) during single-leg hop compared to nondancers with CAI. Thirdly, dancers with CAI showed a lower positive rate during the anterior drawer test compared to non-dancers with CAI (p=.019). Conclusion: Dancers with CAI demonstrated better ankle function and reduced mechanical instability compared to non-dancers with CAI. Therefore, to elucidate the underlying mechanisms of lateral ankle sprain and CAI development exacerbation in dancers, additional factors that can affect ankle sprain, such as visual dependence during postural control and evaluation in dance movements, should be explored.

• 한국해안해양공학회지
• /
• 제2권4호
• /
• pp.208-222
• /
• 1990

가변흘수를 갖는 힌지형 조파기에 작용하는 비선형 파력 및 모멘트를 산정하기 위하여 비선형경계식 문제의 2차 근사해를 Stokes의 전개기법을 이용하여 구하였다. 2차파 성분이 파력 및 모멘트에 기여하는 물리적 의미에 대해 상술하였다. 2차파에 의한 비선형성과 조파판의 흘수에 따른 파력 모멘트 변화를 결정할 수 있도록 설계곡선을 제시하였다. 2차파 성분의 전도력 및 모멘트에 기여하는 부분은 조화성분과 상수성분으로 구성된다. 1차파와 2차파 성분을 합성한 파력 및 모멘트의 크기는 선형 조파이론의 값보다 상당한 증가를 보인다. 2차파 성분의 효과는 상대수심과 파고에 따라 달라지며 짧은 흘수를 갖는 조파기에서 상대적으로 더욱 중요하다.