• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.145-153
• /
• 2012

In this study, we quantify the residual motion artifact in 4D-CT scan using the dynamic lung phantom which could simulate respiratory target motion and suggest a simple one-dimension theoretical model to explain and characterize the source of motion artifacts in 4DCT scanning. We set-up regular 1D sine motion and adjusted three level of amplitude (10, 20, 30 mm) with fixed period (4s). The 4DCT scans are acquired in helical mode and phase information provided by the belt type respiratory monitoring system. The images were sorted into ten phase bins ranging from 0% to 90%. The reconstructed images were subsequently imported into the Treatment Planning System (CorePLAN, SC&J) for target delineation using a fixed contour window and dimensions of the three targets are measured along the direction of motion. Target dimension of each phase image have same changing trend. The error is minimum at 50% phase in all case (10, 20, 30 mm) and we found that ${\Delta}S$ (target dimension change) of 10, 20 and 30 mm amplitude were 0 (0%), 0.1 (5%), 0.1 (5%) cm respectively compare to the static image of target diameter (2 cm). while the error is maximum at 30% and 80% phase ${\Delta}S$ of 10, 20 and 30 mm amplitude were 0.2 (10%), 0.7 (35%), 0.9 (45%) cm respectively. Based on these result, we try to analysis the residual motion artifact in 4D-CT scan using a simple one-dimension theoretical model and also we developed a simulation program. Our results explain the effect of residual motion on each phase target displacement and also shown that residual motion artifact was affected that the target velocity at each phase. In this study, we focus on provides a more intuitive understanding about the residual motion artifact and try to explain the relationship motion parameters of the scanner, treatment couch and tumor. In conclusion, our results could help to decide the appropriate reconstruction phase and CT parameters which reduce the residual motion artifact in 4DCT.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.69-73
• /
• 2011

Unlike land fires, Fires on board a ship are not likely to be extinguished by skilled human resources using a variety of fire fighting equipments, but have to be brought under control on board a ship itself despite of difficult task. There are more cases of deaths from suffocation by smoke than from an increased temperature by heat in fires on board ships, because crew fail to secure a sufficient visibility range enough to escape from the scene of a fire or to leave the ship as early as possible. On the assumption that the height of ship's accommodation area increases from 2.0m to 2.3m comparable to the height of apartments on the ground in Korea, behaviors of fire smokes between the cases of 2.0m and 2.3m heights were compared and analyzed. Based on the blue print of the existing Training Ship "Hanbada", a new blueprint with the 30 cm height adjustment was additionally created. FDS (Fire Dynamic Simulator), which was created by the NIST in the United States and is the most widely distributed simulator for fires, was used to conduct a simulation and predict results. The results of simulation on the basis of temperature of $60^{\circ}C$ showed a safe evacuation period of time at the position 10m apart from the scene of a fire to increase by 55.8 seconds, when the height of ship's accommodation area increased from 2.0m to 2.3m. The results of simulation on the basis of visibility range of 6m showed the safe evacuation periods of time at the positions 10m, 20m and 30m apart from the scene of a fire to increase by 27.1 seconds, 109.2 seconds and 73.3 seconds, respectively, as the height of ship's accommodation area increased from 2.0m to 2.3m. This means that crew can escape more safely from a scene of fires on board when the height of ship's accommodation area is increased and equal to the height of living room in a building on land.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1082-1090
• /
• 2009

Peak expiratory flow rate(PEF) is a very important diagnostic parameter obtained from the forced vital capacity(FVC) test. The expiratory flow rate increases during the short initial time period and may cause measurement error in PEF particularly due to non-ideal dynamic characteristic of the transducer. The present study evaluated the initial rise slope($S_r$) on the flow rate signal to compensate the transducer output data. The 26 standard signals recommended by the American Thoracic Society(ATS) were generated and flown through the velocity-type respiratory air flow transducer with simultaneously acquiring the transducer output signal. Most PEF and the corresponding output($N_{PEF}$) were well fitted into a quadratic equation with a high enough correlation coefficient of 0.9997. But only two(ATS#2 and 26) signals resulted significant deviation of $N_{PEF}$ with relative errors>10%. The relationship between the relative error in $N_{PEF}$ and $S_r$ was found to be linear, based on which $N_{PEF}$ data were compensated. As a result, the 99% confidence interval of PEF error was turned out to be approximately 2.5%, which was less than a quarter of the upper limit of 10% recommended by ATS. Therefore, the present compensation technique was proved to be very accurate, complying the international standards of ATS, which would be useful to calibrate respiratory air flow transducers.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.963-974
• /
• 2015

This study was conducted to determine the effects of organic vegetable cultivation on the soil physical properties in 33 farmlands under plastic greenhouse in Korea. We were investigated 5~8 farms per organic vegetable crops during the period from August to November 2014. The main cultivated vegetables were leafy lettuce (Lactuca sativa L.), Perilla leaves (Perilla frutescens var. Japonica Hara), cucumber (Cucumis sativus L.), strawberry (Fragaria ananassa L.) and tomato (Lycopersicon spp.). We have analyzed soil physical properties. The measured soil physical parameters were soil plough layer, soil hardness, penetration resistance, three soil phase, bulk density and Porosity. The measurement of the soil plough layer, soil hardness and penetration resistance were carried out direct in the fields, and the samples for other parameters were taken using the soil core method with approximately 20 mm diameter core collected from each organic vegetable field. Soil plough layer was average 36 cm and ranged between 30 and 50 cm, and slightly different depending on the sorts of vegetable cultivation. The soil hardness was $0.17{\pm}0.15{\sim}1.34{\pm}1.02$ in the topsoil, $0.55{\pm}0.34{\sim}1.15{\pm}0.62$ in the subsoil. It was not different between topsoil and subsoil, but showed a statistically significant difference between the leafy and fruit vegetables. Penetrometer resistance is one of the important soil physical properties that can determine both root elongation and yield. The increase in density under leafy vegetables resulted in a higher soil penetrometer resistance. Soil is a three-component system comprised of solid, liquid, and gas phases distributed in a complex geometry that creates large solidliquid, liquid-gas, and gas-solid interfacial areas. The three soil phases were dynamic and typically changed in organic vegetable soils under greenhouse. Porosity was characterized as range of $54.2{\pm}2.2{\sim}60.3{\pm}2.4%$. Most measured soils have bulk densities between 1.0 and $1.6gcm^{-3}$. To summarize the above results, Soil plough layer has been deepened in organic vegetable cultivation soils. Solid hardness (the hardness of the soil) and bulk density (suitable for the soil unit mass) have been lowered. Porosity (soil spatial content) was high such as a well known in organic farmlands. Important changes were observed in the physical properties according to the different vegetable cultivation. We have demonstrated that the physical properties of organic cultivated soils under plastic greenhouse were improved in the results of this study.

• The Journal of Korean society of community based occupational therapy
• /
• v.6 no.2
• /
• pp.51-59
• /
• 2016

Objective : The purpose of study is to provide basic information about the effects of leisure time use and leisure activity performance for intellectual disabilities residing in a residential care facility by participating a regular rehabilitation sports program. Methods : Participants were recruited 8 individual with intellectual disability in a residential care facility in Yong-in city and the study period lasted 12 weeks, from september 1 to November 30 in 2015. As a program, participants participated a muscle strengthening exercise using a Gym-ball and a elastic band. In order to analyze leisure time-use, time questionnaire was used every month to analyze total time and exercise frequency. Also, analyze the effects of leisure activity performance, Canadian Occupational Performance Measure(COPM) was used to performance and satisfaction of dynamic leisure activity. Collected data was encoded by item and analyzed with SPSS ver18.0. Descriptive statistics were used for the participants' general information. A non-parametric test (the Friedman test) was used to analyze leisure time-use. A non-parametric test (the Wilcoxon's signed ranked test) was used to analyze to the effects of leisure activity performance. Statistical significance was accepted outside the 95% confidence interval. Results : The results of the total time and the exercise frequency showed significant increase. Also, the results of the performance and the satisfaction showed significant increase. Conclusion : Thus, the participation of the rehabilitation sports program is a vital element to lead to change leisure time use and leisure activity performance for intellectual disabilities residing in a residential care facility. Also, through the providing and the developing a regular rehabilitation sports program systematically, intellectual disabilities residing in a residential care facility have a higher quality of life and satisfaction of the daily routine and life in a residential care facility.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.6
• /
• pp.111-122
• /
• 2016

Support and efforts are being strengthened at the national level for entrepreneurial activities that are expected to revitalize our economy. Generally, according to the previous studies, it is known that entrepreneurship positively affects economic growth and the reduction of unemployment rate through employment creation. The analysis of the impact of entrepreneurial activities on economic growth and job creation is mainly based on national comparative analysis. In this paper, however, the impact of start-up activities in the Busan metropolitan city on regional economic growth and employment improvement. In this study, the dummy variables were assigned to firms within three years, five years, and ten years after start-up according to the period since the start-up of the firm. As a result of the empirical analysis, the value of dummy variable of the start - up firms was found to be significant in the analysis of the sales growth rate as the dependent variable according to the preceding study by Evans(1987). Therefore, it can be seen that the growth rate of the start - up company is higher than that of the other companies and it is positive for the regional economic growth. In addition, the coefficient of the dummy variable decreases from the enterprise analysis to the latter within three years, five years, and ten years after the start-up, and confirms that the coefficient of the firm's start-up years has a negative value. I could see more clearly. On the other hand, in the analysis of the effect of start-up firms on unemployment rate reduction, the growth rate of regular workers was higher than that of other firms. This suggests that it positively affects the reduction of the unemployment rate in the region. In addition, in the dynamic analysis using the Almon estimation formula and the Koyck model, the effect of log-transformed net start-up firms on the growth rate of new workers is very significant. As a result of the above model, It is reaffirmed that start-up activity has a positive effect on employment growth.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.91-101
• /
• 2009

In this study, the landscape of Insa-dong was interpreted from the viewpoint of a social construction of landscape, which regards the dynamic process of landscape change as more important than landscape visibility. This viewpoint also regards landscape as the result of its interaction with certain actors. From a review of previous studies on the same subject, it was found that the physical environment, institutions, and images are essential factors influencing landscape change. Insa-dong, which was Kwanindaing and Daesadong during the Joseon Dynasty, acquired symbolic meaning as a traditional area during the Japanese colonial period because of its many antique shops and Korean-style buildings. In 1970, the establishment of modern galleries in the district added to its image as a haven of the traditional Korean culture. Insa-dong thus eventually came to be referred to as "the street of traditional culture" by the people of Korea. Thanks to global festivals like the Asian Games, the Olympics, and the World Cup, Insa-dong's reputation as a cultural tourist destination has become stronger as these festivals created a need for a place in Korea where the country's traditional culture can be showcased to foreign tourists. After the mid-1990s, the merchants of Insa-dong began to cash in on the district's image as a showcase of traditional Korean culture due to the economic depression that emerged then. The people of Insa-dong and those outside it, however, came to feel that this trend damaged the district's image. Therefore, the people of Insa-dong and the district's local government started a movement to restore the aesthetic value and symbolic meaning of the district's landscape. This effort induced institutional change. Insa-dong used to be a natural haven of traditional Korean culture. Its landscape has recently been reconstructed so that this image could be restored. This process was made possible by the active interaction of diverse people: merchants, users, administrators, and NGOs.

• Korean Security Journal
• /
• no.2
• /
• pp.259-289
• /
• 1999

The Security Industry has dynamic working conditions. So this study intends to find the advisable direction for the reduction of accidents. To achieve the aim, the investigation of documents and the examinations of actual proofs have been done to figure the theoretical background and to see the basic knowledge of security industry. The questionnaire was composed of two question sheets to search real data and actual proofs, with making targets of pure security organization and personnel. The one consists of 9 questions to find the scale and extent of security organizations and the population and character of security personnel, and the other 25 questions in 3 major areas to analyze the causes, the frequency rates, the factors, and the condition of accidents. The period of survey was July 15th to October 15th in 1997 by mail/telephone/interview. The questionnaires were efficiently returned from 102 different organizations including the public security groups of Seoul Metropolitan Police Bureau and so on, with the information of 8,222 persons having worked for Korean Security Industry in 1996. So being based on the reality, some meaningful facts were found, and were compared with the national statistics of the Government. This study is made up of 5 chapters : in the 1st chapter the motivation, the object, the method, the direction and the limitation of the approach were presented ,in the 2nd chapter the theoretical background were inferred ; in the 3rd chapter the collected data of accidents in Korean Security Industry were analyzed and explained on the base of the questionnaires , in the 4th chapter the advisable facts connected with preventing accidents were mentioned ; in the last the conclusion were stated. With the replies of 102 different organizations including the information of 8,222 persons in 1996, the main facts found or analyzed through this study are as follows. Firstly, accident is an unpredictable and occasional event. It occurs to man and/or thing, but the frequency rate of accidents in Korean Government and other Institutes has been calculated and evaluated only in the point of the accident related with man. Secondly, the factors of accidents are firstly relevant to the way preventing accidents in Security Industry in Korea. However the frequency rate is academically calculated and evaluated by at once man(population) and hour(time). But the Government has done the rate only by man(population). This can be improper and inaccurate rates. Thirdly, the confused concept of security is used in Korean Government, academic society, corporation and so on. Therefore the detailed formation of the concept is needed for the development of Security Industry in Korea. Fourthly, security organizations can be classified into 'public security(public law enforcement)' and 'private security' according to its identification, and furthermore 'private security' can be divided into 'facilities-guard service', 'body-guard service', and 'patrol service' according to its major role. Fifthly, in the viewpoint of the number of both organization and population,'facilities-guard service' is centered in Korean 'private security'. According to the analyzed results of the questionnaires in this study, the frequency rate of accidents of Korean Security Industry is 0.43(%) totally in 1996 : 'facilities-guard service' 0.54(%), 'body-guard service' 0.12(%), and 'patrol service' 0.21(%) in 'private security', and 'public security' 0.20(%). With regard to the accident frequency rate of organization and population, 'facilities-guard service' is the highest. The accident frequency rate of population in 'facilities-guard service' organization ranges dispersively from 0.20(%) to 11.11(%). Sixthly, the accidented rate of workers having serviced for under one year is 57.6(%). This can mean that the main factor of accidents in Korean Security Industry is the lack of role-understanding and training/education. And another factor can be found on the time of accident occurrence. Many accidents have been occurred on the relaxed points like as just after lunch and morning rush-hour. Lastly, the major advisable facts related to preventing accidents are as follows : The workers who are over fifty years old in 'facilities-guard service' organization need to be educated for preventing accidents ; It is desirable that the training and education to prevent accidents should be practiced in the time of pre-service ; As the style of accidents and the age of the accidented are not same according to major service area('public security' and 'private security' : 'facilities-guard service', 'body-guard service', and 'patrol service'), the plans to prevent accidents must be different and various. However fracture and bruise are general accidents in Korean Security Industry ; Workers must care about traffic accident and violent fall ; It seems that the grouped working with other two persons will reduce accident occurrence possibility rather than individually single working.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2010

A regional climate model (RCM) can be a powerful tool to enhance spatial resolution of climate and weather information (IPCC, 2001). In this study we conducted dynamical downscaling using Weather Research and Forecasting Model (WRF) as a RCM in order to obtain high resolution regional agroclimate indices over the Korean Peninsula. For the purpose of obtaining detailed high resolution agroclimate indices, we first reproduced regional weather for the period of March to June, 2002-2008 with dynamic downscaling method under given lateral boundary conditions from NCEP/NCAR (National Centers for Environmental Prediction/National Center for Atmospheric Research) reanalysis data. Normally, numerical model results have shown biases against observational results due to the uncertainties in the modelis initial conditions, physical parameterizations and our physical understanding on nature. Hence in this study, by employing a statistical method, the systematic bias in the modelis results was estimated and corrected for better reproduction of climate on high resolution. As a result of the correction, the systematic bias of the model was properly corrected and the overall spatial patterns in the simulation were well reproduced, resulting in more fine-resolution climatic structures. Based on these results, the fine-resolution agro-climate indices were estimated and presented. Compared with the indices derived from observation, the simulated indices reproduced the major and detailed spatial distributions. Our research shows a possibility to simulate regional climate on high resolution and agro-climate indices by using a proper downscaling method with a dynamical weather forecast model and a statistical correction method to minimize the model bias.