• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.255-256
• /
• 2006

This paper presents the performance improvement of a Nozzle/Ball type servovalve with variant drain orifice. First of all, the configuration of the novel servovalve is proposed. Then, the static characteristics are investigated under blocked load condition, and its dynamic characteristics are analyzed by using the linearized flow-pressure relationship. Finally, the performance at the null condition of the proposed servovalve is numerically evaluated through the comparison study with the convention at counterparts.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.439-444
• /
• 2018

The performance improvement in the high speed region for the sensorless based synchronous machine drive is discussed in the paper. Conventional dynamic overmodulation method in the vector controlled AC driver requires some calculation of maximum amplitude of the applying voltage vector to limit its amplitude, which leads to increase the calculation time of microprocessor. For low performance microprocessor, this might be impossible to complete the control loop within limited control time. Thus, to reduce the calculation time, the constantly limited amplitude for applying voltage vector is tried in this paper to drive sensorless based synchronous motor. Certainly, there exists some errors in amplitude and phase angle between inverter voltage and calculating voltage in the sensorless algorithm. But, this errors are too small to prevent the high speed sensorless operation within overmodulation region. The validities of the proposed method is proved by the experimental results.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.49-52
• /
• 1996

In this article, we develop a 'dynamic' approach to manufacturing improvement, based on perspectives of manufacturing learning and decision theory. First, we present an alternative definition of production system consistent with a decision-theoretic perspective: the system consists of structural, infra-structural, and decision making constructs. A primary proposition is that learning capability possessed by a manufacturing system be prerequisite for the system to improve its manufacturing performance through optimal controlling of the three constructs. To support the proposition, we elaborate on a mathematical representation of "learning" as defined in an applied setting. We show how the learning capability acts as an integrating force ameliorating the trade-off between two key manufacturing capabilities, i.e., process controllability and process flexibility.exibility.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1358-1371
• /
• 2017

Dynamic thermal rating (DTR) system is an effective method to improve the capacity of existing overhead line. According to the methodology based on CIGRE (International Council on Large Electric systems) standard, ampacity values under steady-state heating balance can be calculated from ambient environmental conditions. In this study, simulation analysis of relations between parameters and ampacity is described as functional dependence, which can provide an effective basis for the design and research of overhead transmission lines. The simulation of ampacity variation in different rating scales is described in this paper, which are determined from real-time meteorological data and conductor state parameters. To test the performance of DTR in different rating scales, capacity improvement and risk level are presented. And the experimental results show that the capacity of transmission line by using DTR has significant improvement, with low probability of risk. The information of this study has an important reference value to the operation management of power grid.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.289-292
• /
• 2008

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of OpenRISC processor and a clock gating algorithm using ODC (Observability Don't Care) operation for a low-power processor. The branch prediction algorithm has a structure using BTB(Branch Target Buffer) and 4-way set associative cache has lower miss rate than direct-mapped cache. The clock gating algorithm reduces dynamic power consumption. As a result of estimation of performance and dynamic power, the performance of the OpenRISC processor using the proposed algorithm is improved about 8.9% and dynamic power of the processor using samsung $0.18{\mu}m$ technology library is reduced by 13.9%.

• The KIPS Transactions:PartA
• /
• v.14A no.6
• /
• pp.357-362
• /
• 2007

In distributed systems like cluster systems, in order to get more performance improvement, the initial task placement system precisely estimates and correctly assigns the resource requirement by the process. The resource-based initial job placement scheme needs the prediction of resource usage of a task in order to fit it to the most suitable hosts. However, the wrong prediction of resource usage causes serious performance degradation in dynamic load balancing systems. Therefore, in this paper, to resolve the problem due to the wrong prediction, we propose a new load metric. By the new load metric, the resource-based initial job placement scheme can work without priori knowledge about the type of process. Simulation results show that the dynamic load balancing system using the proposed approach achieves shorter execution times than the conventional approaches.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.1-19
• /
• 2002

The purpose of this study is to identify influence that eye movement have an effect on postural control and balance performance by plegia side of the impaired patients of central nervous system. Subjects are patients with the impairment of central nervous system and experimental and control groups are forty people and thirty people seperatively, Total subjects were selected to seventy persons, but twelve persons of experimental group quit during the experimental periods and eight persons of control group did not measure after exercise. Therefore, twenty eight persons of experimental group and twenty two persons of control group were selected in this study and experimental group peformed eye movement for eight weeks according to the exercise program of this study. The measurement of dependent variable is right static balance, left static balance, bilateral static balance, and bilateral dynamic balance before exercise and after eighth week of exercise, examiner again measured and analyzed the results. The results were as follows: 1. As the result of comparing balance performance ability after test of the experimental and control group with right hemiplegia and control group, all of static balance performance ability of right side (p < 0.01), static balance performance ability of left side (p < 0.01), static balance performance ability of bilateral side(p < 0.01), dynamic balance performance ability of bilateral side(p < 0.05) of experimental group were statistically greater improved than those of the control group. 2. As the result of comparing balance performance ability after test of the experimental and control group with left hemiplegia and control group, all of static balance performance ability of right side (p < 0.01), static balance performance ability of left side (p < 0.01), static balance performance ability of bilateral side(p < 0.05), dynamic balance performance ability of bilateral side(p < 0.05) of experimental group were statistically greater improved than those of the control group.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.3
• /
• pp.111-119
• /
• 2008

This paper combines fuzzy concepts with an existing dynamic performance isolation technique in order to improve the response time performance of a Web server supporting differentiated services. A load balancing mechanism based on the fuzzy control technique is developed in such a way that ambiguous situations caused by workload estimation of cluster-based Web servers, client request rates, and dynamic request rates can be represented in an effective way. In addition, we verify that the fuzzy-based performance isolation technique improves the performance and robustness of differentiated service systems efficiently through comparing 95-percentile of response time between the fuzzy-based Performance isolation technique and the existing one, which do not use the fuzzy concept.