• Journal of the Economic Geographical Society of Korea
• /
• v.5 no.2
• /
• pp.249-275
• /
• 2002

Iksan Export Free Zone which was established for the export promotion, the employment augmentation, the technological improvement and the regional development promotion through the attraction of foreign direct investment is declining function with diminution of foreign direct investment, exportation and employment since the middle of the 1980s. The decline factor of the function was inherent in disregard of the necessary locational factors for Export Free zone's function promotion and without respect to conditions in a choice of location. And the present labor intensive industrial structure of region has some difficulties with a modification of Export Free Zone's industrial structure to a technology intensive industry. According to the lack of coherent policy, a limited plottage and a lack of the extensible space decrease the effect of agglomeration and economic of scale. And the lack of governmental policy to create a dynamic advantage comparative with an amelioration of the locational conditions of region diminish the regional attractive force to foreign direct investment.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.4
• /
• pp.469-474
• /
• 2015

In ultrasonic spray pyrolysis deposition, a precursor solution is evaporated by an ultrasonic atomizer, then gas-carried into a furnace where the solute is separated from the water vapor. After condensation, polymerization, and nucleation, the solute oxide forms a thin film. To improve the deposition efficiency, the ultrasonic atomizer was studied to optimize the evaporated gas flow. The vat cover was redesigned, using three versions with different inlet factors being tested through a computational fluid dynamic analysis as well as a water evaporation experiment. The atomization rate with a hemispherical cover with a $30^{\circ}$ inlet was found to be 2.4 times higher than that with the original. This improvement was verified with fluorine-doped tin oxide spray pyrolysis deposition. The film obtained with the modified vat cover was 2.4 times thicker than that obtained with the original vat cover.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2001

Seismic design forces for bridge components may be determined by modifying elastic member forces of design earthquakes using appropriate response modification factors according to the national design code of bridges Modeling technique of pile foundation system is one of the important parameters which greatly affects the results in the process of the elastic seismic analysis of a bridge system with pile foundation. In this paper, a approximate and simplified modeling technique of a pile foundation system for the practical purposes is presented. The modeling technique is based on the stiffnesses of pile foundation during earthquake. The horizontal stiffnesses are determined from the resistance-deflection curves derived from the results of dynamic field tests using cyclic loads and the vertical stiffness includes the effects of the end bearing capacities and side friction of piles as well as the pile compliances under the expected vertical load level. The applicability of the proposed technique has been validated through the some example bridge analyses.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.589-599
• /
• 2016

Implemented since 2004, TPLC (Total Pollution Load Control) is the most powerful water-quality protection program. Recently, uncertainty of prediction using steady state model increased due to changing water environments, and necessity of a dynamic state model, especially the watershed model, gained importance. For application of watershed model on TPLC, it needs to be feasible to adjust the relationship (mass-balance) between discharged loads estimated by technical guidance, and arrived loads based on observed data at the watershed outlet. However, at HSPF, simulation is performed as a semi-distributed model (lumped model) in a sub-basin. Therefore, if the estimated discharged loads from individual pollution source is directly entered as the point source data into the RCHRES module (without delivery ratio), the pollutant load is not reduced properly until it reaches the outlet of the sub-basin. The hypothetic RCHRES generated using the HSPF BMP Reach Toolkit was applied to solve this problem (although this is not the original application of Reach Toolkit). It was observed that the impact of discharged load according to spatial distribution of pollution sources in a sub-basin, could be expressed by multi-segmentation of the hypothetical RCHRES. Thus, the discharged pollutant load could be adjusted easily by modification of the infiltration rate or characteristics of flow control devices.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.767-774
• /
• 2010

Due to advantages of NAND flash memory such as non-volatility, low access latency, low energy consumption, light weight, small size and shock resistance, it has become a better alternative over traditional magnetic disk drives, and has been widely used. Traditional DBMSs including mobile DBMSs may run on flash memory without any modification by using Flash Translation Layer (FTL), which emulates a random access block device to hide the characteristics of flash memory such as "erase-before-update". However, most existing FTLs are optimized for file systems, not for DBMSs, and traditional DBMSs are not aware of them. Also, traditional DBMSs do not consider the characteristics of flash memory. In this paper, we propose a flash-conscious storage system for DBMSs that utilizes flash memory as a main storage medium, and carefully put the characteristics of flash memory into considerations. The proposed flash-conscious storage system exploits log records to avoid costly update operations. It is shown that the proposed storage system outperforms the state.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.251-258
• /
• 2006

Aspect-Oriented Software Development is new software development method. It has many advantages related to software performance, maintenance and repair. Also it offers modularization method to a existing programming language for secondary function such as security and fault tolerance. But the present problem is that we have to use new aspect-oriented programming language. Further more when we apply Aspect to legacy system, we have to recompile the source code in order to build software system based on AOSD. In this paper, we propose and design Connector that can be composed with Aspect in legacy system dynamically. To elaborate this work, we use the information of operations about Core and Aspect, and the information of pointcut described with XML. We validate that the proposed Connector has features such as no need of new compiler, no recompilation and no modification of legacy system through case study.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.684-690
• /
• 2006

This paper proposes a message transmission model for hard real-time communications of periodic messages on a switched Ethernet and also proposes an algorithm to schedule the messages to be transmitted within their deadlines. The proposed scheduling algorithm is a distributed one and is peformed by the source and the destination nodes without the modification of the operational features of the standard Ethernet switch. When a new periodic message needs to be transmitted, it is first checked whether it can be scheduled on both the transmission and the reception links without affecting the already-scheduled messages, and a feasible schedule is made for the new message if it is schedulable. The proposed scheduling algorithm guarantees the transmission of periodic messages within their deadline and allows flexible message transmission on a hard real-time switched Ethernet through the dynamic addition of new periodic messages during run-time.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.319-328
• /
• 2006

This paper presents a method for analysis of the mechanical behavior of a crankshaft in a four-cylinder internal combustion engine. The purpose of the analysis was to study the characteristics of the shaft in which the pin and arm parts were assumed to have a uniform section in order to simplify the modal analysis. The results of natural frequency transfer function and mode shape were compared with those obtained by experimental work. The results obtained from the comparison showed a good agreement with each other and consequently verified the analysis model. Furthermore, a prediction of crankshaft characteristics under the firing condition, by using the model, was performed. This study describes a new method for analyzing the dynamic behavior of crankshaft vibrations in the frequency domain based on the initial firing stages. The new method used RMS values to calculate the energy at each bearing journal and counter weight shape modification under the operating conditions.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.218-231
• /
• 2005

Statement of problem. In the partially edentulous patients, removable partial dentures have been working as a important treatment modality. Clasps, a kind of direct retainers, received some amount of stresses during the insertion and removal of partial denture on the abutment tooth. Purpose. The study is to investigate stresses of the different clasps. Material and methods. In order to investigate the degree of stresses, maxillary partial edentulism (Kennedy Class II modification I) was assumed and removable partial dentures were designed on it with three kinds of metallic materials; cobalt-chromium alloy, type IV gold alloy and commercially pure (c.p.) titanium. Aker's clasp was applied on the left second molar. RPA (mesial rest-proximal plate-Aker's) clasp was on the left first premolar and wrought wire clasp was on the right first premolar. Three dimensional, non-linear, dynamic finite element analysis method was run to solve this process. Results. 1. Cobalt-chromium alloy had the highest von Mises stress value and c.p. titanium had the lowest one irrespective of the types of clasps. 2. In the Aker's clasps, stress on the retentive tips was shown shortly after the appearance of stresses of the middle and minor connector areas. These time lag was much shorter in the RPA clasps than in the Aker's clasp. 3. In general. retentive tips of wrought wire clasps had much less amount of stress than other clasps. Conclusion. The amount of stress was the highest in the RPA clasp and the lowest in the wrought wire clasp, in general.