• The Plant Pathology Journal
• /
• v.20 no.1
• /
• pp.18-21
• /
• 2004

The root hair provides a major entering spot for the symbiotic legume rhizobia. It is obvious that dynamic cell wall modification occurs in the plant root hair during the early microbe invasion. Expansins are nondestructive cell wall-modifying proteins that are involved in cell growth and differentiation. Among about 40 expansin genes in Arabidopsis, two expansin genes are expressed specifically in the root hair cell. Orthologous genes of this Arabidopsis root hair expansins have been found in other Brassica members, rice, and Medicago truncatula (a legume). In this review, I discuss the probable function of expansins during the early symbiotic process between the root hair and microbes and the regulation of root hair expansin genes in a comparative approach.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.1035-1040
• /
• 2004

The vibration of an electric hand grinder originates from the motor, gear, bearing, and fan. Its excessive vibration can be harmful to workers. To reduce the vibration of an electric hand grinder. frequency analysis for the vibration signals of a running electric hand grinder and modal test for the each part were done. The results show that the vibration is due to the resonance of the case. To remove the resonance, the case structure was modified and the bearing cap was replaced on a basis of the results of the rotor dynamic analysis using SAMCEF. As a result, the vibration of the electric hand grinder was reduced greatly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.71-71
• /
• 2004

일반적으로 동흡진기는 하나의 가진진동수에 의해 진동하는 감쇠가 작은 기계나 구조물에 효과적으로 적용되고 있다 대부분의 동흡진기의 적용 사례는 주 진동이 유발되는 부위, 또는 진동을 억제해야하는 부위에 직접적으로 동흡진기를 부가하여 효과를 얻는 방식을 택하고 있다. 그러나 절연기를 설치 할 수 없는 경우라든지, 절연기로는 한계가 있는 경우, 이미 설치가 완료된 기계 시스템에 절연 변경이 곤란한 경우 또는 국부 진동모드에 대한 진동저감을 할 때는 동흡진기에 대해 보다 일반적인 접근 방법이 필요하며 질량과 스프링계를 부착하기 힘든 경우나 억제시키려는 부위에 설비나 기기의 성능을 저해할 수 있는 경우에는 부득이 그 위치를 변경시켜 줘야 할 경우가 생긴다 할 수 있다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.176-183
• /
• 1997

본 논문에서는 모드합성법의 단점이라고 할 수 있는 고차모드의 생략오차를 보완하면서 합성 후의 전체구조물의 자유도를 줄일 수 있는 자유경계합성법을 대형복합구조물에 적용하기 위하여 일반화된 다중모드합성법을 제시하고 판구조물과 모형차에 적용하여 그 효율성을 검증하였다. 또한 모드합성법의 개념을 구조물의 동적구조변경에 적용하기 위한 부분구조 모드물성치 감도법을 제안하였으며, 이의 타당성을 확인하기 위하여 판구조물에 적용하였다. 이 방법은 물성치가 변하는 분계에서만 모드물성치의 감도를 다시 계산하여 합성하면 되므로 대형구조물의 구조변경시 효과적인 방법이다.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.300-307
• /
• 2003

Using a conventional railway, a tilting train was applied as a means of improving vehicle speed curve negotiation without any modification of infrastructure. In order to achieve the optimal car-body position control through the tilting mechanism, a dynamics analysis was required after the kinematics analysis of the tilting mechanism. For this, the geometric relationship of the linkage-type tilting mechanism was defined. Then, the equations of motion for the half car-body were derived. With the derived equations, the effect of the parameter change on performance was analyzed. The analysis result can be used in the optimum design of a tilting mechanism that considers the track environment, vehicle and operational conditions in which the tilting vehicle is applied.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.507-512
• /
• 2007

A new type of extended element-free Galerkin method (XFEM) is proposed on this paper. The blending region which was inevitable in the extended finite element method and the extended meshfree method is removed in this method. For this end, two different techniques are developed. The first one is the modification of the domain of influence so that the crack tip is always placed on the edge of a domain of influence. The second method is the use of the Lagrange multiplier. The crack is virtually extended beyond the actual crack tip. The virtual extension was forced close by the Lagrange multiplier. The first method can be applied to two dimensional problems only Lagrange multiplier method can be used in both two and three dimensions.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.519-525
• /
• 2010

From the results of tracer test for the existing chlorine contactor in Y water treatment plant, $T_{10}$ and $T_{10}$/T were calculated as 130 min and 0.16, respectively. Therefore it required the modification schemes for improving hydraulic efficiency, surrogated by T10 and $T_{10}$/T, and disinfection performance. In this study, in order to reduce dead zone within contactor, the installation of porous baffles in the near of each corner was suggested and verified using transient CFD(Computational Fluid Dynamics) simulation technique and tracer tests on dynamic condition. From the results of simulation and tracer tests, it was revealed that porous baffles installed have been effective to reduce dead zone within contactor, and increase plug flow fraction.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.270-275
• /
• 2005

As the features of mobile phones are being enhanced and the performance is being greatly improved, the generic operating systems are being incrementally used in mobile phones. However, since the mobile phones have different requirements in both features and performance compared with desktop or server systems, the operating systems for generic systems could not be used without customization and modification. This case study paper describes the design and implementation of a Linux-based smartphone hardware and software. The enhancements and additional implementations in both kernel and middleware layers are explained. As an experiment, the power consumption of the implemented mobile phone under a number of user scenarios has been measured.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.176-178
• /
• 2005

In this paper deals with the frequency control of the HVDC scheme linking Haenam to Cheju Island. The primary aim of the study is to develop and evaluate a new frequency control that can be employed without having to utilize the existing Synchronous Compensators(Gas Turbines). Study cases are completed involving synchronous compensators trip and load tripping events and study plots presented. It is demonstrated that the existing frequency measurement can be replaced by one derived from the AC network alone, incorporated into a new frequency control algorithm and gives good frequency control and dynamic performance.

• Annual Conference of KIPS
• /
• 2002.11b
• /
• pp.1031-1034
• /
• 2002

본 논문에서는 커널수준의 침입탐지를 위한 동적 침입탐지 규칙 변경 기법을 제안한다. 제안하는 기법은 침입탐지 규칙은 규칙타입 프로토콜 타입, 패킷 헤더와 패킷 페이로드에 대한 검사를 수행하기 위한 규칙들로 세분화하여 LVR로 표현하고 이들 LVR이 계층적으로 구성된 IDRL로 관리한다. 침입탐지는 IDRL을 이용하여 수행하며, 규칙에 대한 변경은 변경된 규칙에 대한 LVR을 구성하고 LV를 이용한 포인터 변경을 이용하여 IDRL에 반영하는 방법이다. 제안하는 기법은 IDRL을 이용한 침입탐지와 탐지규칙의 변경을 IDRL에 최소한의 비용으로 수행하고, LVR을 이용하여 침입탐지 규칙을 디스크와 메모리에 동일한 형태로 저장 및 관리하여 탐지규칙 초기화 비용과 변경 비용을 최소화할 수 있다. 이를 통하여 보다 안전한 커널 수준에서의 네트워크 보안을 위한 효율적인 동적 침입탐지 규칙 변경을 지원할 수 있다는 장점을 가진다.