• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.291-295
• /
• 2012

In the industrial field, real-time monitoring system like a fault early detection is very important. For this, the infrared thermography technique as a new diagnosis method is proposed. This study is focused on the damage detection and temperature characteristic analysis of ball bearing using the non-destructive infrared thermography method. In this paper, thermal image and temperature data were measured by a Cedip Silver 450 M infrared camera. Based on the results, the temperature characteristics under the conditions of normal, loss lubrication, damage, dynamic loading, and damage under loading were analyzed. It was confirmed that the infrared technique is very useful for the detection of the bearing damage.

• Geomechanics and Engineering
• /
• 제8권6호
• /
• pp.801-810
• /
• 2015

The ultimate pullout capacity under inclined dynamic loading is an important measure of the destruction degree of vertical screw piles (anchors) under dynamic actions. Based on the static and dynamic tests on two kinds of model screw piles, the ultimate bearing capacity was researched considering different distance-width ratio of blade (D/W) and preloading ratio. The results compared well with other experimental data available in the literature. This research reveals that D/W might determine the failure model of the piles (anchors), for example D/W = 3.14 or 5; a critical dynamic-static loading ratio (DSLR) existed in the experiments. The critical DSLR was reached under the conditions of 40%~60% preloading (D/W = 3.14) or 20%~40% preloading (D/W = 5), respectively.

• 한국강구조학회 논문집
• /
• 제18권4호
• /
• pp.469-480
• /
• 2006

본 연구의 목적은 철도차량하중으로 인한 디스크받침의 정 동적 거동특성을 평가하여, 디스크 받침 설계기술 발전에 기여하고자 함이다. 디스크받침은 탄성받침의 일종으로 폴리우레탄 패드를 사용하여 탄성을 구현하고 있으며, 가동단에는 PTFE를 사용하여 교량의 움직임을 흡수하고 있다. 실험실에서 수차례의 정적 실험을 실시하여 폴리우레탄 고무의 정적거동을 평가하기 위한 데이터를 획득하였다. 또한, 4개의 디스크받침은 철도교량인 판형교에 설치하여 철도차량에 의한 디스크받침의 동적 거동을 측정하였다. 현장실험은 기관차 1량을 사용하여 일정속도로 주행하는 주행시험을 실시하여 각 디스크받침의 동적 변형과 이에 작용하는 동적 하중을 측정하였다. 정적 실험을 통해서 나타난 사실은 수직강성에 크게 기여하는 것이다. 또한 동적 강성은 정적으로 평가된 강성보다 크게 나타났다. 차량의 속도가 증가함에 따라 디스크받침의 변형도 증가하는 것으로 나타났지만, 크게 증가하지는 않았다. 디스크받침의 고정단의 동적 강성이 가동단의 강성보다 크게 나타나는데, 이는 가동단의 PTFE가 변형을 일으키기 때문이라고 판단된다. 이러한 결과는 철도교를 위한 디스크받침 설계기술의 발전에 기여할 것이다.

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.134-138
• /
• 2011

회전기기의 고장 탐지에 있어 기존의 진단법과 달리 동적 하중조건 하에서 비접촉, 비파괴의 적외선 열화상 기법이 제안된다. 본 논문에서는 단열 깊은 홈 볼 베어링을 시편으로 하여, 회전기기의 기존의 고장 진단법 대신 수동형 열화상 기법을 이용한 시험을 수행하였다. 추가적으로, 제안된 방법의 효율성을 평가하기 위해 기존의 진동 스펙트럼 분석법을 적용하여 열화상 시험법을 비교하였다. 시혐의 결과로써, 동적 하중조건 하 볼 베어령의 온도분포 특성이 철저히 분석되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.465-474
• /
• 2001

Base Isolation system is an effective design strategy that provides a practical substitute for the seismic design of bridge. In this study, the dynamic tests was performed on HDB (Hysteretic Damping Bearing) and Dynapot. Then, the dynamic analysis was carried out for a bridge using the experimental results to estimate the seismic performance of bearings. Analysis for bridge was performed for four types of earthquake loadings. The result of dynamic test and theoretical analysis indicate that the performance of HDB and Dynapot is appropriate for the earthquake loading.

• Tribology and Lubricants
• /
• 제21권1호
• /
• pp.39-45
• /
• 2005

Investigation of the mass effect on the journal traces in the clearance of engine bearing has been performed for better design of mass distribution of crank system components such as crank pin, piston, con-rod, balance weight, crank throw weight, etc. as well as for better oil reaction behaviors to the applied forces from the cylinder pressures on the bearing. In this preliminary study, crank pin traces in the engine bearing clearance are computed by varying the equivalent magnitude of crank pin mass that includes the masses of crank pin, piston, con-rod. etc.. while most previous studies regarding journal traces in the bearing clearance neglect the inertia effects of crank pin mass. Although the inertia effect of pill mass is negligibly small compared to viscous force by ${\pi}bearing$ theory, it is found that it gives a great amount of influences on the journal traces in full bearing computation $(2\pi\;bearing\;theory)$ under the dynamic loading conditions.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.231-235
• /
• 2001

This paper has been presented the dynamic effect by the journal speed. eccentricity and source positions in order to overcome the defects of air bearing such as low stiffness and damping coefficient. Choosing the two row source position of air bearing is different from previous investigations in the side of pressure distribution of air film by the wedge effects. These optimal chooses of the two row source positions enable us to improve the performance of the film reaction force and loading force as making the high speed spindle. The results of investigated characteristics may be applied to precision devices like ultra-precision grinding machine and ultra high speed milling.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.567-568
• /
• 2009

The CAMUS 2000-1 experimental program were performed in France to investigate of the 1/3-scaled reinforced concrete bearing walls behavior on the shaking table under biaxial earthquake loading. The nonlinear 3D finite element analysis of push over test and linear dynamic analysis under biaxial earthquake loading are investigated with the concrete damaged plasticity model using ABAQUS.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.212-217
• /
• 1998

Reynolds equation, which describes behavior of fluid film in journal bearing, basically satisfies mass conservation. But, boundary conditions usually used with this equation, e.g. half Sommerfeld or Reynolds boundary conditions, cannot fulfill this natural law of conservation. In the case of connecting rod bearing, where applied load is dynamic and its magnitude is relatively large, such unrealistic boundary conditions have serious influence on calculation results, especially on lubricant flow rate or power dissipation which are important parameters in thermal analysis. Another important factor in the analysis of connecting rod bearing is elastic deformation of bearing support structure which is relatively flexible. In this paper, EHL analysis of connecting rod beating is performed using mass-conserving boundary condition. Elastic deformation of bearing support structure and application of mass-conserving boundary condition have significant effects on the performances of connecting rod bearing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.559-560
• /
• 2009

본 연구는 2차 긴장재를 비부착시킨 PSC거더 교량의 거더높이가 일반 PSC거더 교량보다 낮음에 따라 정 동적 차량재하시험과 구조검토를 수행하여 내하력을 평가함으로서 대상교량의 건전성 평가를 수행하였다.