• 한국지구과학회지
• /
• 제23권6호
• /
• pp.507-513
• /
• 2002

유성일대 화강암, 팔당일대 호상 편마암 및 사북일대 퇴적암 지역에서 동탄성계수와 탄성파 속도와의 관계를 밝히기 위하여 완전파형음파검층을 통해 이들 암상에서 탄성파 P파와 S파 속도를 측정하였다. 또한 유성일대 화강암과 팔당일대 편마암 지역에 대해서는 일축압축강도와 포아송비를 실내시험에서 측정하였다. 실내실험 자료에서는 팔당 호상편마암 지역의 탄성파 P파 및 S파 속도가 유성의 화강암 지역보다 높게 나타난 반면, 포아송비가 낮은 값을 보이므로 포아송비의 증가함에 따라 탄성파 P파 및 S파 속도가 감소하는 상관관계를 보였다. 완전파형음파검층을 통하여 얻어진 동탄성계수는 동체적탄성계수와 동전단탄성계수에 비하여 높은 값을 보인다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.223-226
• /
• 2005

동일한 파원에서 발생된 P, SH, SV 파를 3성분 지오폰으로 동시에 기록하는 방법을 연구하기 위해서, 94 m의 측선을 따라 2 m 간격으로 설치한 수신점에서 기록된 24채널 자료를 512 ms동안 기록하였다. 원시자료의 수직성분에는 P파가 초동으로 뚜렷하게 나타나며, 측선방향과 수직한 수평성분은 P파가 약화된 반면 S파의 신호/잡음비가 향상된 모습을 보인다. 토모그래피 역산을 통해 계산된 P파 및 S파의 속도 토모그램을 이용하여 동포아송비의 2차원적 분포를 산출한 결과, 동포아송비는 $0.2{\~}0.3$의 범위로 분포하며, 이는 한번의 타격으로 P파 및 S파의 속도분포와 더불어 및 동포아송비의 2차원적 분포까지 획득할 수 있다는데 큰 의의가 있다고 판단된다.

• 터널과지하공간
• /
• 제6권1호
• /
• pp.1-9
• /
• 1996

Pocheon granite specimens were thermally treated with cycles of predetermined temperatures ranging 2$0^{\circ}C$ to $600^{\circ}C$. Characterization of thermally-induced microcracks were carried out using optical microscopy and their effect on the various physical & mechanical properties were studied. Generally. uniaxial compressive strength, Young's modulus, Poisson's ratio, elastic wave velocity and specific gravity were found to decrease with increasing temperature. From 30$0^{\circ}C$ upwards, negative lateral strains were observed, which resulted in negative Poisson's ratio. Dynamic Young's modulus and Poisson's ratio were found to be generally most sensitive indicators to thermal cracking.

• 한국농공학회논문집
• /
• 제49권4호
• /
• pp.43-49
• /
• 2007

The reinforced concrete slab is one of main structure members in the construction industry sector. However, most of researches regarding to RC slabs have been focused on two-dimensional Mindlin-type plate element on the basis of laminated plate theory since three-dimensional solid element has a lot of difficulties in finite element formulation and costs in CPU time. In reality, the RC slabs are subjected to dynamic loads like a heavy traffic vehicle load, and thus should insure the safety from the static load as well as dynamic load. Once we can estimate the dynamic behaviour of RC slabs exactly, it will be very helpful for design of it. In this study, the 20-node solid element has been used to analyze the dynamic characteristics of RC slabs with clamped edges. The elasto-visco plastic model for material non-linearity and the smeared crack model have been adopted in the finite element formulation. The applicability of the proposed finite element has been tested for dynamic behaviour of RC slabs with respect to characteristics of concrete materials in terms of cracking stress, crushing strain, fracture energy and Poisson's ratio. The effect on dynamic behaviour is dependent on not crushing strain but cracking stress, fracture energy and Poisson's ratio. In addition to this, it is shown the damping phenomenon of RC slabs has been identified from the numerical results by using Rayleigh damping.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.657-668
• /
• 2021

In this study, a relationship between the resonance frequency ratio and Poisson's ratio was proposed that can be used to directly determine the elastic constants. Using this relationship, the frequency ratio between the 1st bending mode and 2nd bending mode for any rectangular Timoshenko beam can be directly estimated and used to determine the elastic constants efficiently. The exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The highest percent difference for the frequency ratio between the theoretical values and the estimated values for all the beam dimensions studied was less than 0.02%. The proposed equations were used to obtain the elastic constants of beams with different material properties and dimensions using the first two measured transverse bending frequencies. Results show that using the equations proposed in this study, the Young's modulus and Poisson's ratio of rectangular Timoshenko beams can be determined more efficiently and accurately than those obtained from industry standards such as ASTM E1876-15 without the need to test the torsional vibration.

• 비파괴검사학회지
• /
• 제23권2호
• /
• pp.98-106
• /
• 2003

비파괴시험(NDT)은 구조물의 기능에 손상을 주지 않으면서 콘크리트에 대한 많은 정보를 준다. 여러 가지 NDT 방법들 중에서, 초음파 속도법과 충격반향기법과 같이 탄성파의 속도를 이용하는 방법은 콘크리트의 압축강도, 탄성계수, 포아송비의 추정뿐만 아니라, 내부 미세구조 변화 모니터링과 결함 탐지 등을 위해 이용되고 있다. 본 연구에서는 물-결합재비가 $0.27{\sim}0.50$이고 시멘트 중량의 20%를 플라이 애쉬로 대체 사용한 콘크리트를 제조한 후, 동일한 콘크리트에 대해 초음파 속도법과 충격반향기법을 이용하여 종파 속도를 각각 측정하여 서로 비교하였다. 실험 결과, 콘크리트 공시체로부터 측정된 초음파 속도가 충격반향기법에 의해 측정된 종파 속도, 즉 막대파 속도보다 큰 경향을 나타내었으며, 이들의 차이는 재령이 증가함에 따라 그리고 콘크리트의 강도가 커질수록 각각 감소하는 경향을 나타내었다. 또한, 동포아송비, 정탄성계수, 동탄성계수, 속도-강도의 상관관계 등을 실험적으로 결정하였다. 그 결과, 동적인 방법으로 결정되는 포아송비와 탄성계수가 정적인 시험에 의한 것보다 크게 나타났다. 따라서, 탄성파 속도를 이용하여 콘크리트의 성질들을 보다 정확하게 추정하기 위해서는 속도 특성에 대한 이해가 필요할 것으로 사료된다.

• 지구물리
• /
• 제3권2호
• /
• pp.127-138
• /
• 2000

시멘트 모르타르 재료에 대한 동탄성계수와 정탄성계수의 차이를 고찰하고자 일곱 단계의 물시멘트 혼합비에 대해 다양한 길이의 시료를 제작, 시험하였다. 이들 시료의 동탄성계수 및 정탄성계수는 비중 측정, 초음파 전파 속도 측정 및 일축 압축 시험을 통해 결정되었으며, 시료에 대해 측정된 P파 및 S파 속도 분석은 기존의 아날로그 방식이 아닌 디지털 방식을 통해 수행되었다. 일련의 자료 처리 과정을 지친 디지털 방식 자료는, 초음파 전파 속도를 정밀하게 분석하는데 결정적인 역할을 할 수 있음이 확인되었으며, 복수 시료를 이용한 거리 변화에 따른 파의 지연 시간 변화를 이용한 속도 산정 방식이, 단일 시료 길이와 전파 시간을 이용한 기존 속도 산정 방식보다 더욱 정밀한 값을 보여주는 것으로 판명되었다. 밀도는 시료의 P파 및 5파 속도와 뚜렷한 양의 상관성을 보여주며, 일축 압축 강도 역시, 밀도와 뚜렷한 양의 상관성을 보여준다. 초음파 전파 속도를 통해 측정된 동탄성계수$(E_D)$와 일축 압축 시험을 통해 측정된 정탄성계수$(E_S)$의 비율$(E_D/E_S)$은 시료의 강도가 커질수록 함께 커지는 경향을 보여주었으며, 모든 시료에 대해 항상 동탄성계수가 정탄성계수보다 높게 평가됨이 확인되었다. 그러나 동포아송비$({\nu}_D)$와 정포아송비$({\nu}_S)$의 비율$({\nu}_D/{\nu}_S)$은 강도와 특별한 상관성을 보여주지 않았으며, 그 비율도 $69{\sim}122\;%$정도로 동포아송비와 정포아송비가 큰 차이를 보이지 않는 것으로 나타났다.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.147-154
• /
• 1996

This study wag performed to evaluate the engineering properties of permeable polymer concrete with stone dust and fly ash and unsaturated polyester resin. The following conclusions were drawn. 1. The highest strength was achieved by stone dust filled permeable polymer concrete, it was increased 17% by compressive strength, 188% by bending strength than that of the normal cement concrete, respectively. 2. The water permeability was in the range of 3.O76~4.152${\ell}/ cm{^2}/h$, and it was largely dependent upon the mix design. These concrete can be used to the structures which need water permeability. 3. The static modulus of elasticity was in the range of $1.15{\times} 10^5kg/cm^2$, which was approximately 53 56% of that of the normal cement concrete. 4. The poisson's number of permeable polymer concrete was in the range of 5.106~5.833, which was less than that of the normal cement concrete. 5. The dynamic modulus of elasticity was in the range of $1.29{\times} 10^5~1.5{\times} 10^5 kg/cm^2$, which was approximately less compared to that of the normal cement concrete. Stone dust filled permeable polymer concrete was showed higher dynamic modulus. The dynamic modulus of elasticity were increased approximately 7~13% than that of the static modulus. 6. The compressive strength, bending strength, elastic modulus, poisson's ratio, longitudinal strain and horizontal strain were decreased with the increase of poisson's number and water permeability at those concrete.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.601-619
• /
• 2017

Cantilever retaining wall movements generally depend on the intensity and duration of ground motion, the response of the soil underlying the wall, the response of the backfill, the structural rigidity, and soil-structure interaction (SSI). This paper investigates the effect of material properties on seismic response of backfill-cantilever retaining wall-soil/foundation interaction system considering SSI. The material properties varied include the modulus of elasticity, Poisson's ratio, and mass density of the wall material. A series of nonlinear time history analyses with variation of material properties of the cantilever retaining wall are carried out by using the suggested finite element model (FEM). The backfill and foundation soil are modelled as an elastoplastic medium obeying the Drucker-Prager yield criterion, and the backfill-wall interface behavior is taken into consideration by using interface elements between the wall and soil to allow for de-bonding. The viscous boundary model is used in three dimensions to consider radiational effect of the seismic waves through the soil medium. In the seismic analyses, North-South component of the ground motion recorded during August 17, 1999 Kocaeli Earthquake in Yarimca station is used. Dynamic equations of motions are solved by using Newmark's direct step-by-step integration method. The response quantities incorporate the lateral displacements of the wall relative to the moving base and the stresses in the wall in all directions. The results show that while the modulus of elasticity has a considerable effect on seismic behavior of cantilever retaining wall, the Poisson's ratio and mass density of the wall material have negligible effects on seismic response.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.489-495
• /
• 2009

A novel technique to measuret of viscoelastic properties of polymers is proposed to investigate complex Poisson's ratio as a function of frequency. The forced vibration responses for the samples under the normal and the shear deformation are to be measured with varying load masses. The measured data were used to obtain the viscoelastic properties of the material based on an accurate 2D numerical deformation model of the sample. The 2D model enabled us to exclude data correction by the empirical form factor used in 1D model. Comprehensive measurements of viscoelastic properties of two slightly varied silicone RTV rubber ($Silastic^{(R)}$ S2) compositions were performed. Standard composition (90% PDMS polymer + 10% catalyst) and modified composition (92.5% polymer + 7.5% catalyst) were tested in temperature range from $30^{\circ}C$ to $70^{\circ}C$. Shear modulus, modulus of elasticity, loss factor, and both the real and the imaginary parts of the Poisson's ratio were determined for frequencies from 50 to 400Hz in the linear deformation regime (at relative deformations $10^{-4}{\sim}10^{-3}$).