• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2009-2020
• /
• 2004

A parametric study of the factors controlling static and dynamic denting, as well as local stiffness, has been made on simplified panels of different sizes, curvatures, thicknesses and strengths. Analyses have been performed using the finite element method to predict dent resistance and panel stiffness. A parametric approach is used with finite element models of simplified panels. Two sizes of panels with square plan dimensions and a wide range of curvatures are analysed for several combinations of material thickness and strength, all representative of auto-motive closure panels. Analysis was performed using the implicit finite element code, LS-NIKE, and the explicit dynamic code, LS-DYNA for the static and dynamic cases, respectively. Panel dent resistance and stiffness behaviour are shown to be complex phenomena and strongly interrelated. Factors favouring improved dent resistance include increased yield strength and panel thickness. Panel stiffness also increases with thickness and with higher curvatures but decreases with size and very low curvatures. Conditions for best dynamic and static dent performance are shown to be inherently in conflict ; that is, panels with low stiffness tend to perform well under impact loading but demonstrate inferior static dent performance. Stiffer panels are prone to larger dynamic dents due to higher contact forces but exhibit good static performance through increased resistance to oil canning.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.1
• /
• pp.27-36
• /
• 2020

Purpose : The purpose of this study is to apply kinesiology taping and dynamic taping to subjects with ankle instability and to find out the change of static balance and dynamic balance ability and to use it more usefully in daily life. Methods : The subjects were based on 30 Cumberland Ankle Instability Tool questionnaire scores of 24 or less, and were randomly assigned to the kinesiology taping group (n=15) and the dynamic taping group (n=15) to change the static balance and dynamic balance before and after taping Measured. The eyes were closed for 30 seconds and the average balance was measured three times through the Wii balance board in static balance, and the balance ability was evaluated by measuring functional reach test and star excursion balance test in dynamic balance. Results : As a result, the static balance showed significant results in the dynamic speed and the moving distance in the dynamic taping group (p<.05). However, there was no significant difference in the shaking area and the difference in the kinesiology taping group (p<.05) However, both groups showed significant differences in dynamic balance (p<.05). Conclusion : It was confirmed that the application of taping was effective for static and dynamic balance in subjects with ankle instability, and the application of dynamic taping was more effective than kinesiology taping.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.108-113
• /
• 2002

This paper presents a multi-step structural design optimization method fur machine tool structures using a genetic algorithm with dynamic penalty. The first step is a sectional topology optimization, which is to determine the best sectional construction that minimize the structural weight and the compliance responses subjected to some constraints. The second step is a static design optimization, in which the weight and the static compliance response are minimized under some dimensional and safety constraints. The third step is a dynamic design optimization, where the weight static compliance, and dynamic compliance of the structure are minimized under the same constraints. The proposed design method was examined on the 10-bar truss problem of topology and sizing optimization. And the results showed that our solution is better than or just about the same as the best one of the previous researches. Furthermore, we applied this method to the topology and sizing optimization of a crossbeam slider for a high-speed machining center. The topology optimization result gives the best desirable cross-section shape whose weight was reduced by 38.8% than the original configuration. The subsequent static and dynamic design optimization reduced the weight, static and dynamic compliances by 5.7 %, 2.1% and 19.1% respectively from the topology-optimized model. The examples demonstrated the feasibility of the suggested design optimization method.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.188-193
• /
• 1998

This paper describes static and dynamic weak point analysis of spindle systems to eliminate high concentrated bending point on spindle and improve total stiffness of spindle systems. The weak point analysis is based on the evaluation of bending curves of spindles. For static weak point analysis the bending curve is derived from static deflection curve and for dynamic weak point analysis it is derived from the mode shape curves in consideration of the transfer function at exciting point. The validity of the weak point search methodology is verified by comparison of the static deflection, the natural frequency and the dynamic compliance between the original and the improved spindle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1006-1009
• /
• 2000

In this study, a multi-step optimization technique combined with a simple genetic algorithm is introduced in order to minimize the static compliance, the dynamic compliance, and the weight of a high speed machining center simultaneously. Dimensional thicknesses of the eight structural members on the static force loop are adopted as design variables. The first optimization step is a static design optimization, in which the static compliance and the weight are minimized under some dimensional and safety constraints. The second step is a dynamic design optimization, where the dynamic compliance and the weight are minimized under the same constraints. After optimization, the weight of the moving body only was reduced to 57.75% and the weight of the whole machining center was reduced to 46.2% of the initial design respectively. Both static and dynamic compliances of the optimum design are also in the feasible range even though they were slightly increased than before.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.940-951
• /
• 2009

A comparative study on dynamic and static measurement of initial stiffness was conducted. Because soil stiffness decreases even at very small strains, the initial stiffness has been measured by dynamic tests using shear wave velocity measurement. On the other hand, due to the advance of local strain measurement, the triaxial testing device is capable of measuring the static initial stiffness. It has been known that initial stiffness measured by static triaxial tests is generally lower than that measured by dynamic tests possibly due to the limitation of static measurement of displacement at very small strains. This study presents experimental results indicating that the elastic shear moduli could be the same both in dynamic and static measurements owing to the soil anisotropy induced by anisotropic stresses.

• Journal of the Korean Society for Railway
• /
• v.6 no.3
• /
• pp.186-193
• /
• 2003

The object of this study is to ensure the stability of bulk cement cars conducting vibration performance test, dynamic characteristic analysis and static load test of bogie frame. In case of static load test, bogie static load test facility was used. In case of dynamic characteristic analysis, Vampire Software was used. In case of vibration performance test, real bulk cement cars were used in kyeung-bu line. In the results of static load test of bogie frame for bulk cement car, all structures satisfied allowable stress criteria of materials. The vibration performance test and dynamic characteristic analysis results satisfied allowable standards.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2019

Purpose : The purpose of this study was to examine the correlation between static and dynamic balance according to the virtual reality-based squat and conventional squat exercise. Methods : Twenty four participants were randomly assigned to the virtual reality-based squat (VRS) group (n=12) or conventional squat (CS) group (n=12). The static balance (C90 area, C90 angle, trace length, sway average velocity) and dynamic balance (forward, rearward, leftward, rightward) were measured using a force plate by BT4. The VRS group used the virtual reality system during 4 weeks, while the CS group underwent classical squat training. Independent t-test was used to test the homogeneity of the general characteristics of the subjects. The collected data was analyzed using the paired t-test for static and dynamic balance comparisons before and after exercise in both groups and Pearson's test for the correlation between static and dynamic balance according to the measured time. The significance level was set to 0.05. Results : There was no significant correlation between group and static and dynamic balance related variables (p>.05). There was a significant correlation between measurement time and static and dynamic balance related variables (p<.05). According to the measurement time, the static balance parameter C90 area in the VRS group after exercise was significantly decreased (p<.05). The values of forward, leftward and rightward in the VRS group were significantly increased after exercise (p<.05). Conclusion : It is suggested that 20 normal healthy adult men and women who have normal balance ability can improve their ability to control their posture by improving the balance ability when applying virtual reality-based squat exercise.

• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.103-119
• /
• 2016

Multi-storey frame structures are frequently exposed to static and dynamic forces. Therefore analyses of static (buckling) and dynamic stability come into prominence for these structures. In this study, the effects of number of storey, static and dynamic load parameters, crack depth and crack location on the in-plane static and dynamic stability of cracked multi-storey frame structures subjected to periodic loading have been investigated numerically by using the Finite Element Method. A crack element based on the Euler beam theory is developed by using the principles of fracture mechanics. The equation of motion for the cracked multi-storey frame subjected to periodic loading is achieved by Lagrange's equation. The results obtained from the stability analysis are presented in three dimensional graphs and tables.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.472-476
• /
• 1999

The effect of static preload on the dynamic properties of rubber materials is rather important, especially when good isolation characteristics are required at high frequencies. However, there are still few papers for dynamic characteristics of compressed rubber components. It was demonstrated in reference (4) that for bonded rubber material of a cylindrical shape, a simplified theory equation between linear dynamic and nonlinear static behavior of rubber material was useful to predict their combined effects. This paper presents the second part of the study. It is confirmed that for the compressed rubber material, the stress can be factored into a function of frequency and a function of strain(stretch). The finite element methodis applied to analyze non-linear large deformation of rubber material and its results are compared with those of a simplified theory equation. The predicted dynamic material properties based on non-linear static finite element analyses have a good agreement of experimental results and those based on simplified theory equation.