• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.47-53
• /
• 1989

The effect of organic solvent in the dyeing of silk fiber by acid dye was investigated. Acetophenone and benzyl alcohol were shown to be the most effective for the rate of dyeing of silk fiber by Milling Cyanine 5R (C.I. Acid Blue 113), a milling type acid dye, but, with benzyl alcohol, the equilibrium dye uptake was much lower than that in the absence of it. In the presence of solvent, maximum dye uptake shifted to lower temperature than 6$0^{\circ}C$, while without solvent, it was shown at about $60^\circ{C}$. When dyed by Orange II (C.I. acid Orange 7) under same condition equilibrium dye uptake of silk fiber was lower than that for milling type acid dye, and in the presence of benzyl alcohol, still much lower uptake resulted. All these fact reveals that organic solvents in the solvent-assisted dyeing of silk fiber broaden micelle spacings too much, resulting in increased rate of dyeing, and decreased equilibrium dye uptake, contrary to wool.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.8-16
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fiber was pretreated with organic solvent/water solution of various compositions. The organic solvents used in this experiment were benzyl alcohol, n-buthanol, and N,N-dimethylformamide(DMF). Density of the fibers were investigated as a measure of crystallite region. The dye uptake increased in the order of pretreatment with hot water < untreated < 5% benzyl alcohol < 100% benzyl alcohol < 90% benzyl alcohol; hot water < untreated $\risingdotseq$ 5% butanol < 100% beutanol < 90% butanol; hot water $\risingdotseq$ 5% DMF < untreated < 90% DMF < 100% DMF. The dye uptake increases with increase of crystallinity. It seems likely that the recrystallization process during the pretreatment with organic solvent/water solutions leads to an increase in the microvoid and then a large increase in the dye uptake. Also the dyeing rate increased and the dyeing transition temperature decreased with the pretreatments. The results obtained are corresponds with the plasticization of the fiber structure formed during the pretreatrnent.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.20-27
• /
• 1997

As a non-aqueous dyeing method, organic solvent dyeing was discussed, The dye uptakes on PET and the solubilities of C. I. Disperse Violet 1 in 24 kinds of organic solvents including water were investigated, and the partition coefficients in PET- solvents system were also obtained from their isotherms. Contrary to in the other solvents, the dye uptake of C. I. Disperse Violet 1 on PET in hexane was even much higher, and also considerable in cyclohexane. The logarithmic plot of the dye uptakes versus the solubilities showed that the dye uptakes are linear and inversely proportional to the solubilities. The effect of $T_g$ decrease of PET in organic solvents to dye uptake seems to be very small relative to the effect of solubility, and so negligible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.100-107
• /
• 1998

Polyester filaments were dyed with disperse dye in dyebath containing water and water miscible organic solvents . acetone, 1,4-dioxane, DMF. In case of Acetone and 1,4-dioxane, the equilibrium dyeuptake was maximun at the volume fraction 0.05. The equilibrium dye uptakes were decreased as volun~e fraction of organic solvents were increased. When the volume fractions of water miscible organic solvents were varied, dye uptake was increased constantly with dyeing time. In dyebath containing water and water miscible organicsolvent, the dyeuptake was increased quickly during initial 40∼ 60 min. and slowly increased there after. The slope of Ct/Coo to t was greater in dyebath containing water and water miscible organic solvents than dyebath containing water. The differences of the slope with volulne fractions of water miscible organic solvent were not shown big.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.105-114
• /
• 2017

High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at $120^{\circ}C$ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.42-42
• /
• 2001

Following the prior studs regarding that 1.0g of cotton fabric cound be dyed uniformly with a reactive dye in the solvent mixture of 2㎖ of water and 23㎖ of dichloromethane, silk fabric was dyed with C. I. Reactive Blue 203 in the water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only 3㎖ of water in 22㎖ of dichloromethane, 1.0g of silk fabric could be dyed perfectly. The uptake ratio was increased greatly, compared with that of normal reactive dyeing in a water medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the even dyeing as it disperses a small amount of dye-dissolved water phase and conveys this water phase to the fabric entirely and uniformly.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.128-134
• /
• 2001

Following the prior studs regarding that 1.0g of cotton fabric round be dyed uniformly with a reactive dye in the solvent mixture of $2m\ell$ of water and $23m\ell$ of dichloromethane, silk fabric was dyed with C. I. Reactive Blue 203 in the water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only $3m\ell$ of water in $22m\ell$ of dichloromethane, 1.0g of silk fabric could be dyed perfectly. The uptake ratio was increased greatly, compared wish that of normal reactive dyeing in a water medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the Even dyeing as it disperses a small amount of dye-dissolved phase and conveys this water phase to the fabric entirely and uniformly.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.55-60
• /
• 2001

Cotton fabric was deed with a reactive dye in water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only 2ml of water in 23m1 of dichloromethane, 1.0g of cotton fabric could be dyed perfectly. The uptake ratio was increased greatly, compared with that of normal reactive dyeing in a waters medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the eden dyeing as it disperses a small amount of dye-dissolved water phase and conveys this water phase to the fabric entirely and uniformly.

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.308-314
• /
• 2000

The dyeability of C. I. Disperse Violet 1 on polyester fiber in alkance including a small amount of water was investigated. Up to 1% of water in alkanes the dye uptakes were increased rapidly. The dyeing transition temperature of the polyester fiber in alkanes with 1% of water was $86.5^\circ{C}$ that is lower by $11^\circ{C}$ than $97.5^\circ{C}$ in alkanes only. This means that water plasticizes the polyester fiber, and that dyes begin to penetrate the polyester fiber at lower temperature. Addition of trichloromethane which is known as a strong plasticizer on polyester fiber, in alkanes, increased the dye uptakes of C. I. Disperse Violet 1 on polyester fiber at $100^\circ{C}$, but the dyeing transition temperature was lower by $3^\circ{C}$ than in alkanes only.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.25-32
• /
• 1998

In the prior study, we found that the dye uptakes of C. I. Disperse Violet 1 on PET in hexane and cyclohexane were higher than those in the other solvents. Therefore, in this study, the dye uptakes and the partition coefficients in alkanes having different number of carbon atoms were obtained and their relationship to the solubilities of the dye in alkanes was also investigated. As the number of carbon atoms of alkanes increases, solubility of the dye increases but the dye uptake decreases. This is due to the fact that the hydrophobicity of alkanes become relatively strong as increasing the number of carbon atoms. It was also found that the dye uptakes in iso-alkanes were larger than those in normal alkanes. This is because that the branched alkanes(iso-alkanes), judging from the tendency of lowering solubility and increasing dye uptake as decreasing the number of carbon atoms of alkanes, behave like the alkanes with less number of carbon atoms rather than the alkanes with the same number of carbon atoms. The logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are linearly and inversely proportional to the solubilities. This is in good accordance with the results of the prior study. The heat of dyeing was also calculated from the equilibrium adsorptions at various temperatures. It seemed that the dyeings of PET by C. I. Disperse Violet 1 in nonane, decane, iso-pentane and iso-octane were rather endothermic processes. Dyeing rates in alkanes were somewhat delayed unlike general appearances in solvent dyeing.