• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.542-546
• /
• 2005

This study was investigated to establish the optimum conditions of dyeing silk fabric with Brassica campestris. This experiment was done under different dyeing conditions of dye concentration, dyeing temperature, dyeing time, dyeing repeating times, and mordants which were treated pre, syn, and post methods. The effects of dyeing conditions and mordanting were evaluated in terms of dyeaffinity(K/S value) and CIE-Lab color factors. Also, the effect of mordanting on color fastnesses was assessed. The dyeaffinity increased remarkably as dye concentration increased up to 200% owf. The dyeaffinity increased continuously with dyed temperature and reached dyeing equilibrium at $80^{\circ}C$. The maximum dyeaffinity was observed at 30minutes of dyeing time. In the relationship between the K/S value and dyeing repeating times, the K/S value became higher as repeating time was increased. The changes of surface color and colorfatness of dyes were not increased greatly on all mordanting states. The extracts of Brassica campestris produced mainly yellow color in silk fabric. The antimicrobial activity existed slightly as the ratio of 22.7%.

• Journal of the Korean Home Economics Association
• /
• v.46 no.6
• /
• pp.13-19
• /
• 2008

In this paper, the dyeing ability of the volcanic ash dyeing on cotton knitted fabrics were investigated. Acrylic copolymer was used to improve the depth of fabric color in the dyeing process. K/S values of dyed fabrics were measured to examine the dyeing properties. Two different classes of dyeing process were tested; (1) volcanic ash dyeing after pretreatment and (2) simultaneous co-treatment with volcanic ash and acrylic copolymer. In the first process, the effects of parameters such as the concentration of volcanic ash, concentration of Na2S04, dyeing time, dyeing temperature and pH of dyebath were noted. In the second process, the effects of parameters such as concentration of acrylic copolymer, dyeing time and temperature, and drying temperature were noted. Experimental results showed that the co-treatment of acrylic copolymer improved the dyeing properties of cotton knitted fabrics with volcanic ash. For the first dyeing experiment, concentration of dispersing agent was 0.1%, concentration of volcanic ash was 4%, treatment time was 20minutes, concentration of $Na_2SO_4$ was 2%, treatment temperature was $60^{\circ}C$ and treatment pH of dyebath was neutral. In the second dyeing experiment, concentration of acrylic copolymer was 2%, treatment temperature was $80^{\circ}C$, treatment time was 40 minutes, and treatment drying temperature was $150^{\circ}C$.

• The International Journal of Costume Culture
• /
• v.13 no.1
• /
• pp.62-66
• /
• 2010

Of all the ways that energy is consumed within textile industry, few are as high energy-expending as dyeing process. The energy consumption in dyeing process amounts to 77% of total fuel consumption, 54% of total electricity use. A technical development in terms of efficient saving energy and time as well is required in the process of dyeing textiles. Recently, dyeing experts are investigating new technologies can conserve energy grafting into microwaves, radio waves, infrared lights, etc. Dyeing industry in Korea, however, the research related to energy conservation has been rarely conducted. Accordingly, this study aims to examine the possibility where especially microwaves could be applied to reduce the energy use and enhance dyeing process skill. This study performs the experiment in which microwave is employed as heating condition in dyeing and figures out as color yield being promoted, bathochromic effect would be achieved. Applying microwaves in dyeing process is expected to lower the carbon emission, energy and time wasted, ultimately exalt economic efficiency.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.344-351
• /
• 2006

This paper is intended to determine the optimal processing parameters applied to the dyeing procedure so that the desired color strength of a raw fabric can be achieved. Moreover, the processing parameters are also used for constructing a system to predict the fabric quality. The fabric selected is the nylon and Lycra blend. The dyestuff used for dyeing is acid dyestuff and the dyeing method is one-bath-two-section. The Taguchi quality method is applied for parameter design. The analysis of variance (ANOVA) is applied to arrange the optimal condition, significant factors and the percentage contributions. In the experiment, according to the target value, a confirmation experiment is conducted to evaluate the reliability. Furthermore, the genetic algorithm (GA) is combined with the back propagation neural network (BPNN) in order to establish the forecasting system for searching the best connecting weights of BPNN. It can be shown that this combination not only enhances the efficiency of the learning algorithm, but also decreases the dependency of the initial condition during the network training. Most of all, the robustness of the learning algorithm will be increased and the quality characteristic of fabric will be precisely predicted.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.151-162
• /
• 2012

Regarding experimental study on the dyeing properties of natural dye, I have dyed silk fabric with Styphnolobium japonicum, sappan wood, and indigo. The results of the experiment have been analysed by wavelength of maximum absorption, K/S and CIE Lab chromaticity co-ordinated. The results are as follows: In case of complex dyeing using Styphnolobium japonicum and sappan wood, dyeing with sappan wood, which is red related color, after dyeing with Styphnolobium japonicum, which is yellow related color, is more efficient. When dyeing was maden by complex of Styphnolobium japonicum and sappan wood, Dyeing method by the order of "Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$mordanting" made the best result of complex dyeing. In case of complex dyeing using Styphnolobium japonicum and Indigo, dyeing with Styphnolobium japonicum after the indigo made the best result. When dyeing with indigo first, and then Styphnolobium japonicum, yellow color was not well dyed, and low level of saturation caused lusterless color. Ordering of Styphnolobium japonicum${\rightarrow}$sappan wood${\rightarrow}$indigo made the best result of complex dyeing in case of complex dying with Styphnolobium japonicum and indigo. Dyeing order, sappan wood first and then indigo last method shown 560~640 nm wavelength of maximum absorption which most color was blue related. In contrast, Indigo first and then sappan wood method shown 460~560nm wavelength of maximum absorption which color was red related. Complex dyeing with sappan wood and indigo was showing lusterless color. In case of dyeing with red and blue, dyeing with sappan wood and indigo was not appropriate.

• Journal of the Korean Home Economics Association
• /
• v.42 no.4
• /
• pp.119-125
• /
• 2004

In this paper, the effect of the volcanic ash dyed on cotton knitted fabrics was studied in various ways. A cationic agent was used to improve the depth of color of the fabric in the dyeing process. K/S values of dyed fabrics were measured to examine the dyeing properties. Cationic agent pretreatment, followed by dyeing with volcanic ash, was tested. In the dyeing experiment, the effects of a wide range of parameters such as the concentration of cationic agent, treatment time, treatment temperature and treatment pH of the dyebath were studied. Experimental results showed that the pretreatment with cationic agent improved the dyeing properties of cotton knitted fabrics with volcanic ash. At this point, concentration of cationic agent was 4%(on weight of fabric), treatment time was 40minutes, treatment temperature was 80 C and treatment pH of the dyebath was a neutral condition.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.167-168
• /
• 2010

Non coating type Low melting yarn(L/M PET) not to use the polyurethane resin causing some problems was knitting and evaluated its dyeing characteristics, heat setting properties and flame-retardant properties without flame retardant agent or flame retardant fabric. In order to investigate the dyeing property of fabric of L/M PET, the dyeing of L/M PET was experimented at each different dyeing temperature. Higher exhaustion yield was achieved at lower temperature of L/M PET compared to regular PET. According to result of the study for the heat setting properties of L/M fiber, the K/S value of dyed L/M fiber increased as much as the heat setting temperature did. The experiment for the light fastness reached similar result to dyed PET. However washing fastness in L/M fiber showed lower grade compared with regular PET. flame-retardant efficiency of L/M PET without flame retardant agent or flame retardant fabric measured by $45^{\circ}$ burn test and Contact burn test. The flame?retardant performance of the sample was carried out according to the Korea Fire-fighting Standard.[KOFEIS 1001].

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.254-267
• /
• 2019

Clamp resist dyeing is a resist dyeing technique in which a fabric is sandwiched between two or more pieces of woodcarving and then a pattern is expressed by dyeing. Records from nine years of King Heungdeok's reign during the Unified Silla dynasty show that the use of the clamp resist dyeing technique was banned for different garments. This was only for garments of YOOKDUPUMNYEO (六頭品女) or OHDUPUMNYEO (五頭品女). Given this, it can be assumed that clamp resisted fabrics were widely used, and the technique had been established during the Unified Silla dynasty or before. However, only the term can be found in the records. Neither its definition nor how this technique was used is explained. Also, it is difficult to assume the types and features of clamp resist dyeing due to a lack of materials. A small number of relics from the Goryeo dynasty still remain, though. Craft techniques have developed through international exchanges and have changed according to respective nations' circumstances including politics, economics, society, and culture. Hence, this research analyzed documents and relics from China and Japan, two countries neighboring the Republic of Korea, and studied the different types and features of clamp resist dyeing techniques. Clamp resist dyeing techniques were divided into monochromatic or multichromatic according to the number of colors that represented patterns, rather than according to the respective nations' features. They were also classified into mono, bilateral symmetry, or vertical-bilateral symmetry according to the structure of the patterns. Through the study of examples of inherited or reproduced dyeing techniques in China and Japan, it was confirmed that different engraving techniques, including relief, openwork, intaglio fit for the feature of a pattern and the number of colors, were applied in order to vividly represent patterns on fabric. Using small flower pattern clamp resist dyed fine tabby in Amitabha of 1302, the only relic showing its patterns and colors in Korea, as the experiment subject, this research successfully reproduced a clamp resist dyeing technique through a successful experiment based on the basic materials from the dyeing technique case study. Due to the significance of the experiment on a clamp resist dyeing technique that stopped its transmission and shows the features of the technique, this study is expected to be a basic resource that can be used for future reproductions of multichromatic clamp resist dyeing techniques. Also, it is expected to be helpful in widening and recreating the world of Korean pattern dyeing with modern dyeing techniques.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.110-114
• /
• 2011

This experiment was conducted to examine the ideal condition for multiple colors dyeing of cut rose, 'Akito'. Four different colors of dye were applied to make multiple flower colors in cut rose by absorption method. Acidic condition around pH 3.5 showed the fastest absorption speed in all four colors. There is no difference at each pH levels, at part of leaves dyeing, it is more affected colors rather than pH levels in purple and blue colors. From vary concentration of each dyes, $10g{\cdot}L^{-1}$ concentration of dyeing solution gave the best color definition. But it's not significant and result was different by each color in a same concentration. 10 minutes of dyeing performed pastel color and 30 minutes performed the best color definition, but the 30 minutes treatment accompanied with significant dyeing on the leaves also. As a result of this experiment, optimum condition for dyeing cut rose, 'Akito' requires pH 3.5, $5-10g{\cdot}L^{-1}$ of dye concentration and 10-30 minutes treatment.