• Journal of the Korean Applied Science and Technology
• /
• v.38 no.5
• /
• pp.1273-1281
• /
• 2021

The purpose of this study was to increase the power of color and examine the long-lasting power, which is a disadvantage of one-pack acid hair dye by using chestnut shell pigment. For this, hair dyeing power was measured using a spectrophotometer, the optical density(O.D.) value was measured to examine the degree of fading of the hair, and the elasticity of the hair was analyzed by measuring the tensile strength. As a result of comparing the results of applying different leaving times and treatment methods to the hair samples of each level, the experimental group that was heat-treated for 20 minutes showed the highest dyeing power. Then, it was confirmed in the order of 40 minutes of natural exposure, 10 minutes of heat treatment, and 20 minutes of natural exposure. And it was also confirmed that the color expression visually improved as it went up to level 10. However, at level 10, it was confirmed that some water loss occurred even after 3 days and the tensile strength was low. These findings that indicated the beauty industry will popularize a one-step acid hair dye containing various natural dye ingredients to help maintain modern people's well-being and healthy mind and body.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.55-62
• /
• 2003

Wool fabrics were dyed with the aqueous solution of C. I. Red Acid 114 mixed with methanol dissolving three kinds of barely water soluble ketones, acetophenone, 2-pentanone, and 3-pentanone. The steric hinderance and the orientation of the bigger hydrophobic part of the solvated dye molecules to the fiber slowed down the dying rate, however, loosening the wool molecule, say a little swelling, disaggeregating the dye molecules, and attaining the higher dye concentration on the fiber surface by the added solvents increased the amount of dye on the fabric. The higher concentration or/and the higher dyeing temperature helped loosen fiber molecules and made it easier for the solvated dye molecules to penetrate into the inside of the fiber. Acetophenone, the most influential solvent used, showed that the ability to loosen fiber molecules was the most important of all the three positive solvent actions mentioned above. The considered mechanism provided before reflected the fact that the dye uptake on the fabric dyed with the solvents included, except for 0.034M and 0.051M of acetophenone, was even lower than that without any solvents at $50^\circ{C}$, but all the solvents added to the dye bath increased the dye uptake on the fiber at $70^\circ{C}$.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.149-155
• /
• 2010

The advanced and complicated modern society recognizes image creation based on the identity of the global competitive age as the important means. The requirement for a new vision to the globally environmental problem has affected on design so that as environmentally-friendly products and technologies have been developed and original expression modes have been appeared which the medium of paper which is natural material, paper has been highlighted newly. Hanji made of mulberry fiber, a bast fiber of mulberry is a representative environment-friendly natural fiber. In addition, it has various functions similar to those of yellow earth such as emission of far infrared rays, antibiosis, deodorization, fast dry ability of sweat, and simple dyeing ability. It is Hanji threads that are produced from various processes of Hanji materials. Therefore, hanji threads are able to be both woven and knitted still remaining Hanji's excellent characteristics. In addition, it is light, bio-degradable, durable and washable, and it is an environment friendly product with the distinguished texture and sensitivity. Under the concept of 'Circle' designed the uniforms of music hall to inform that the uniforms as a media representing music hall represents the unique Sori Arts Center of Jeollabuk-do traditional style.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2000

In order to decolorize disperse dyes by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. To increase the removal efficiency of decolorization in the aqueous solutions, the optimal condition of decolorization by this strain was investigated, and continuous plant test was also developed. The optimal culture conditions of temperature and pH were found to be 4$0^{\circ}C$ and 8.5~9, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest(93%) among the nitrogen sources. The strain to be screened was excellent to adjust to pH, and it seems to be have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_4\cdot{7H}_2O$ and $KH_2PO_4$ were 0.1%(w/v) and 0.2%(w/v). The result of continuous plant process using wastewater was as following : $COD_{Mn}$ removal efficiency was over than 50%, and this strain was very excellent in decolorization-efficiency for the wastewater of Taegu dyeing complex.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.116-127
• /
• 2010

Metal acid dyes are usually used to dye wool fabric to achieve high concentrated color and strong color fastness. However, metal acid dyes contain lots of heavy metal. That causes not only environmental pollution but also diseases to human. In this study, wool reactive dyes instead of metal acid dyes for wool, which are environmental friendly, are compared and analyzed in the evaluation system of their harmfulness, containing heavy metals and examined exhaustion rates and dyeing characteristics.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.371-374
• /
• 2002

Fifty microbes were isolated from dyeing wastewater. PVA degrading ability was tested by culturing individual strains or two different strains. When single strain was used, the PVA degrading efficiency was 60% at maximum. In the case of combination of two different strains, efficiency was increased up to 96%. And 80% of PVA was degraded within 3 days, which showed the fastest removal rate compared to previously reported data.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.47-52
• /
• 1996

PP-PHE blends were prepared by mechanical blending using relatively high moecular weight polyhydrozyether(PHE) and popypropylene polymers. PP-PHE blends were prepared and characterized for the purpose of obtaining a dycable PP fibers with the composition of less than 10 wt.% of PHE. 1)yeable PP fibers were acquired through the melt spinning of the PP-PHE blend of comprising less than 10 wt.% of PHE. The resultant fibers had tensile strength of 2~3 g/d, elongation of 330~600%, initial modulus of 22~46 g/d and yield stress of 1.0 g/d, and exhibited markedly improved dyeing ability such as higher absorbance, higher dye adsorption and deeper shade than those of pure PP fiber.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2004

This study was carried out on the process of natural dye substances which can flock ultraviolet rays without producing harmful substances by pollution, germs, etc. While making human body safe in contact, extracting Gardenia, Sappan wood, Radix scutellariae, Cromwell, Mugwort, Gallnut, Lac. Those are used for curing diseases, dyeing silk cloth with those extracts, and examining the color fastness, Ultraviolet protection. From this study, the following conclusion was produced. Brightness was lower in pre-mordanting than in post. And color difference showed that Radix scutellariae was the highest. Aluminum-mordanting showed a higher color difference than Fe. Colorfastness to washing was high in all samples, and the degree of color-changing by washing was the highest in the sample dyed by gardenia, pre-mordanted gallnut showed the highest degree. Colorfastness to perspiration was the highest in gardenia. UV-A test showed that all samples a high rate of 85% or higher compared with test white cloth. Especially, post-mordanted radix scutellariae, pre-mordanted gallnut and post-mordanted sappanwood showed a superior blocking rate.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.8-14
• /
• 2006

The pigment extraction of Opuntia ficus-indica has been conducted to develop useful natural dyes in place of synthetic dyes which are suspected to bring serious environmental pollutions. The dyeing ability on wool fabric by addition of ascorbic acid and several mordants were investigated by means of color measurement. In addition, the fastness of washing, perspiration, rubbing, light, dry cleaning, effect on bacterial reduction and UV-B protection were also investigated. From these investigation, it is suggested that the pigment extracted from Opuntia ficus-indica can be used as a source of natural dyes and the obtained result are as follows. 1. Maximum absorption band (${\lambda}max$) of Opuntia ficus-indica extract is 533nm. 2. The wool fabric dyed with Opuntia ficus-indica extract has stable color by the addition of ascorbic acid and is achieved with addition of 0.1% ascorbic acid, 0.5% several mordant, and three repeated dying at $50^{\circ}C$ for 1.5hr. 3. The wash fastness of the dyed wool fabric when it is washed with neutral detergent is more effective than alkaline detergent. The dry cleaning fastness of the dyed wool fabric is more excellent. In addition, the perspiration fastness of the dyed wool fabric is increased by mordanting method. And than the rubbing fastness of the dyed wool fabric is showed excellent under dryness and wetness. Light fastness of the dyed wool fabric, however is showed inferiority. 4. The wool fabric dyed with Opuntia ficus-indica extract is showed effective bacterial reduction and UV-B protection is increased remarkably.