• 멤브레인
• /
• 제16권3호
• /
• pp.213-220
• /
• 2006

본 연구에서는 정밀여과 및 나노여과 분리막 시스템을 활용하여 염료 제조 시 필요한 탈염/정제/농축처리 기술을 개발하고 그에 따른 염료의 품질과 품질의 안정성을 향상시키며, 기존공정의 단수를 축소하여 생산성 향상, 인력저감 및 원재료의 비용을 감소하고자 하였다. 염료의 탈염/정제/농축처리시 염료의 다양한 농도에 적합한 분리막의 제조 및 가압식 막 element를 제작하고, 가압식 분리막 시스템에 맞는 막 모듈의 설계와 pilot-scale 시스템을 통해 염료의 처리수질 분석 및 운전인자를 도출하였다.

• 복식문화연구
• /
• 제19권2호
• /
• pp.324-333
• /
• 2011

This study was accomplished for the purpose of developing a textile processing ingredient that is harmless to the human body and environment. The research method consists of dyeing cotton textiles by extracting the dye solution from ginseng. Then, chrominance, after treatment, antibacterial ratio and deodorization ratio of cotton fabrics dyed with ginseng extracts were tested and results were examined. The research procedure involved first extracting the dye solution from the ginseng's by-product (fine roots) and then dyeing was effectuated differently according to the test samples temperature and dyeing time requirements. Brightness in all dye substances was lower in pre-mordanting. Beige color could be extracted from pre-mordanted samples. And dark orange from postmordanted samples. Color-festness was high in all samples. Most of samples show a big antibacterial ratio and deodorization ratio. Through this research it has been discovered that, when applied to textiles, Korea's ginseng extract possessed reproducibility features as a natural dye and a possibility to be used in cutting which plays a crucial role in hygienic processing. In addition, by using ginseng's by-product for dyeing processing as the dye solution, efficient application of resources and occurrences of no water waste damages were demonstrated and thus, proved to be environmentally-friendly. Specifically, through this experiment, it was found that saponin, ginseng's special characteristics, possessed excellent antibacterial odor repelling functions to clothing as well as the capability to prevent skin disease.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.327-332
• /
• 2015

A large amount of dye wastewater poses a threat to environmental safety. Disperse blue, an anthraquinone dye that is widely used in textile dyes, is difficult to degrade in wastewater. In this work, one fungus was screened according to the decolorization rate of disperse blue. The fungus was identified and named Aspergillus XJ-2 on the basis of its morphological characteristics and 18s rDNA. Response surface method was used to optimize culture conditions for A. XJ-2. The optimum values of obtained responses were as follows: temperature, $35^{\circ}C$; pH, 5.2; carbon-to-nitrogen ratio, 30:5.5; and rotation ratio, $175r{\cdot}min^{-1}$. Under optimized conditions, the decolorization rate of A. XJ-2 was up to 94.8% in 48 h.

• Current Photovoltaic Research
• /
• 제11권1호
• /
• pp.1-7
• /
• 2023

Flexible dye sensitized photovoltaics (f-DSPVs) based on plastic substrates have attracted significant interest due to their light-weight, flexibility, and compatibility with roll-to-roll processing, as well as their potential application to ubiquitous power sources. However, f-DSPVs exhibit inferior power conversion efficiencies (PCE) compared to conventional DSPVs since the fabrication process must be conducted at a low-temperature (≤ 150℃) to prevent thermal damage of the plastic substrates, which generally results in poor interconnection between the TiO₂ nanoparticles. Numerous novel low-temperature manufacturing approaches for flexible photoanode and counter electrode have been developed. In this review, current progress on low temperature strategies for f-DSPVs technology are discussed.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.26-32
• /
• 1997

In order to remove the pollutants effectively in the dye-processing wastewater by chemical precipitation, coagulation and flocculation test was carried out using several coagulants on various reaction conditions. It was found that the Ferric sulfate was best coagulant for the treatment of mixed dye-processing wastewater. When the Ferric sulfate dosage was 1,100mg/$\ell$, the COD removal rate was very high(50%), and the color was removed very effectively. The COD was decreased relatively well up to 40%, when Alum was dosed as coagulant. But it was difficult to remove the color effectively. Test results about COD removal for the Ferrous sulfate and the Ferric chloride used were mostly same as those of the Alum used. However, the color removal by the Ferrous sulfate was much better than the case of the Alum or the Ferric chloride. It was found that the COD removal was increased and the sludge yield was decreased by pH control before polymer flocculant addition, during the jar test for the Ferrous sulfate and the Ferric sulfate as a coagulant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.56.2-56
• /
• 2002

A dye process of textile industry is important part that finally gives required quality to the textile material. To produce a proper dye for the customers, color management that precise color measurement from original color sample and rapid estimation of corresponding color recipe is most essential. In the practical dye manufacturing process, color management falls into two categories. First one is color management with an expert knowledge of colorist, the other one is computer aided way. In the former management way, color management fully depends on colorists' expert without support of the measurement and computational devices. Objective color management is impossible in this way. The...

• 자원환경지질
• /
• 제37권4호
• /
• pp.383-389
• /
• 2004

지표 및 심토환경에서 물과 용액의 유동특성을 파악하는 것은 토양 및 지하수의 오염을 저감하고 방지하거나 기 오염 지역을 조사하고 정화하는데 있어서 필수적인 요소이다. 본 연구에서는 이 비형광, 비독성의 식용색소인 청색1호(Brilliant Blue FCF, $C_{37}H_{34}N_{2}Na_{2}O_{9}S_{3}$)를 염료 추적자로 이용하여 화강암에서 발달된 잔적토양에서의 침투 유형 및 그 특성을 조사하였다. 디지털 촬영된 수직 및 수평 착색영상은 지형정보 영상처리 프로그램인 ER Mapper, Version6.2를 이용하여 염료착색범위(dye coverage)로 전환되었다. 균질기반유동(homogeneous matrix flow)은 미약 입상 구조를 보이는 A 층위에서 발생하였으며, 상대적으로 세립조직인 A층위와 조립조직인 C층위의 경계에서는 선침투류(先浸透流, fingering)의 특징을 보여주었다. 모암인 화강암 조직의 기원인 거정질 광맥(pegmatitic vein)과 식물 뿌리는 C 층위에서 선택적 유동(preferential flow)을 유도하였음을 확인하였다.

• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.68-75
• /
• 1996

Even if fibers are practically identical with respect to chemical composition and denier, the dyeabilities are freqently a little different in an industrial processing. It is difficult to interpret the numerical values of dye diffusion coefficients from a dye solution into fibers. The main reasons are the multicomponent nature of the diffusion process and the inhomogeneities of the substrate, so-called, various kinds of ordered and disordered regions of polymers, void and pores. The equilibrium dye adsorptions and dyeing rates of a disperse dye into the several PET fibers having the same denier were determined at various temperatures. The dyeability of examined samples was divided into two groups, that is, lower dye adsorption fiber and higher ones at the lower temperatures. This result was discussed with the degree of crystallinity, DSC diagram, X-ray diffractometry and Porosimetry of the PET fiber, and an appropriate model for fine structure of PET fiber was proposed.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2279-2285
• /
• 2011

The geometries, electronic structures and absorption spectra of the two organic triphenylamine-based dyes TA-St-CA and TA-DM-CA, containing identical electron donors and acceptors but the different conjugated bridges, were studied by density functional theory (DFT) at the B3LYP and PBE1PBE levels, respectively. The influence of para-orientating methoxyl units on the electronic structures and light absorption properties of the dyes and the consequent photovoltaic performance of the dye-sensitized solar cells (DSSCs) were investigated in detail. The results indicate that the introduction of the para-orientating methoxyl units into the conjugated bridge induces the increased absorption wavelength as well as the more negative EHOMO corresponding to the bigger driving force $(E_{I^-/I^-_3}-E_{HOMO})$ for dye reduction, which together improve the photovoltaic performance of TA-DM-CA, although there is a decline of the open circuit voltage caused by the more negative $E_{LUMO}$.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.547-552
• /
• 2005

The study has objective in raising value of the gray color as a meaningful color suiting sentiments of modern people by expressing the gray color in various perspective utilizing natural dyes that is natural at the same time having aesthetic color tones. For example, the main ingredient used for coloring black and gray color is the pyrogallol tannin and the gray tone dye can be acquired by combining the tannin with iron. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of Gallapple pyrogallol tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of Gallapple tannin was at around 273 nm, while strong absorption was also observed at below 350 nm. Dye ability of Gallapple tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consist highly of gray tones and showed red tone after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Lightfastness was more on a normal fading. I hope this study opens up possibilities towards presenting gray color expressed from tannin as color with diversity and aesthetic value. In future, comparative study between dye expressed from catechol tannin dye materials will be helpful.