• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.93-94
• /
• 2011

The use of boost chopper in Permanent Magnet Synchronous Generator (PMSG) aims to capture maximum power at any wind speed condition. It is reached by adjusting the duty cycle of boost chopper. In this paper, fuzzy logic algorithm is used to find the duty cycle value which yields the maximum power output. This control scheme is verified by PSIM simulation. Another MPPT method is also simulated as a comparison.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.132-134
• /
• 2018

본 논문은 태양광발전 시스템에서 P&O 방식 기반의 제어 기법인 duty 제어와 전류 제어 방식의 최대전력점 추종특성을 동일모드 조건에서 비교하였으며, 시뮬레이션 및 실험을 통해 검증하였다. Duty 제어 방식은 P-V 특성곡선을 이용하여 전력과 전압의 변화량을 통해 duty 증감을 결정함으로써 동작점을 결정한다. 이와 달리, 전류 제어 방식은 P-I 특성곡선을 이용하여 전력과 전류의 변화량을 통해 전류 지령치를 생성하고 비례-적분제어기를 통해 전류제어를 수행하여 동작점을 결정한다. 두 가지 제어 방식의 정확한 비교를 위해 등가의 ${\Delta}duty$ 및 ${\Delta}I_{ref}$의 값을 선정하여 모드 변화에 따른 ${\Delta}V$의 변화를 동일하게 맞추었다. DC - DC 부스트 컨버터를 이용하여 시뮬레이션과 실험에 두 제어 방식의 태양광발전 시스템을 구성하여 태양광 전압과 전류, 에너지 측면에서 특성을 비교하였다. 최대 전력점이 1.7kW인 특성곡선 조건 하에서, 시뮬레이션과 실험의 결과로 두 방식은 동일 MPPT 모드 시 동일한 동작점에 존재하며, 같은 값의 전력을 출력하여 동일한 성능의 효율을 보임을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.49-58
• /
• 2009

This paper presents the vector control of single phase induction motor(SPIM) to operate water pumping system using PV system with a maximum power point tracking(MPPT). The water pumping system uses a variable speed SPIM driven a centrifugal pump by field oriented control(FOC) inverter. The MPPT using a DC-DC converter controlled the duty cycle to track maximum power from PV under different insolation conditions. The duty cycle directly relate with a flux producing current control($i_{ds}$). The FOC inverter uses a current control voltage source inverter(CC-VSI). The simulation results are shown that the characteristics and performance of drive system, which varies as each conditions of light by expresses in voltage($V_{dq}$), current($I_{dq}$), speed of motor and torque.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.2
• /
• pp.67-72
• /
• 2015

The purpose of this study is to achieve energy saving effect of inverter driving multistage centrifugal pump. For determining the operation points in the pump system, the system curves should be obtained experimentally. To get the system curves, three pumps combined in parallel and one pump operated with different rotational speeds. But for variable speed pump system, energy saving rates can not be evaluated from operation efficiencies. That is why operation efficiencies, system curves, duty cycles, and input powers of the pump system were measured by the constructed experimental apparatus. The duty cycle segmented into different flow rates and weighting the average value for each segment by the interval time. The system was operated with two different periods. The mean duty cycles were collected from apartment and found that the system operated at 40% and at 50% or below capacity. Measured energy saving rate was 58.16%. Estimating method of energy saving rate could be more effective operation index than that of operation efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.180-186
• /
• 2017

In this paper we propose a traffic aware Demand Wakeup MAC(TADW-MAC) protocol, in which low data delay and high throughput can be achieved, for wireless sensor networks. With the TADW-MAC protocol, the problem of the DW-MAC protocol, which schedules only one packet to deliver during the Sleep period in a multi-hop transmission is resolved. DW-MAC is not adequate for the applications such as object tracking and fire detection, in which busty data should be transmitted in a limited time when an event occurs [6-8]. When an event occurs, duty cycle can be adjusted in the TADW-MAC protocol to get less energy consumption and low latency. The duty cycle mechanism has been widely used to save energy consumption of sensor node due to idle listening in wireless sensor networks. But additional delay in packet transmission may be increased in the mechanism. Our simulation results show that TADW-MAC outperforms RMAC and DW-MAC in terms of energy efficiency while achieving low latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.506-514
• /
• 2009

To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

• Journal of Korean Academy of Nursing
• /
• v.21 no.2
• /
• pp.129-149
• /
• 1991

Circadian rhythm is entrained in the 24-hour time interval by periodic factors in the environment, known as zeitgeber. But most rotating work schedules are outside the range of the entrainment of the pacemaker timing the human circadian sleep - wake cycle. It has been postulated that physiological and emotional disturbances occur in most human functions when the circadian rhythm is disturbed. So application of circadian principles to the design of shift schedules can aid in maintaining the temporal integrity of the circadian system and thereby minimize for the shift worker any detrimental consequences of circadian disruption. This study was a quasi-experimental study to test the effect of shift intervals for the clinical nurse on the circadian rhythm. Twenty nurses newly employed in general units of two hospitals were selected as an experimental group and twelve college nursing students as a control group. Both groups were selected according to an established criteria using a purposive sampling technique. Ten subjects were assigned to a weekly shift group and another ten to a biweekly shift group engaged in a semi -continuous shift schedule(sunday off) with a backward direction, that is, morning -evening - night shift. The control group worked a morning shift for 42 days. Oral temperature rhythm, waking tim, sleep - wake cycle, fatigue, and mental performance were measured during the experimental period. The data collection period was from April 30, 1990 to June 10, 1990. MANOVA, paired t-test, ANOVA, and Student Newman Keuls method were used for statistical analysis. The results are summarized as follows. 1. Phase delay in the acrophase of temperature rhythm was shown according to the backward rotating shift. A complete adaptation to work on the night shift was achieved between the sixth and ninth day of the night shift. 2. There was no difference in either waking time or sleep- wake cycle according to the duration of the working day for every shift group. Significant difference was found in the waking time and the sleep -wake cycle for subjects on the morning, evening, and night shift in both of the shift groups(weekly shift group : λ＝0.121, p＜0.01, λ＝0.112, p＜0.01, biweekly shift group : λ＝0.116, p＜0.01, λ＝0.084, p＜0.01). 3. There was no difference in fatigue between the first working day and the last working day for the control group and for the biweekly shift group. In the weekly shift group, physical fatigue was significantly different for the first day and the sixth day of the night shift(t＝-2.28, p＜0.05). Physical fatigue and total fatigue on the first day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝5.79, p＜0.01, F＝4.56, p＜0.05). There was a significant difference between the shift groups and the control group(p＜0.05), Physical fatigue, neurosensory fatigue and total fatigue on the last day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝12.65, p＜0.01, F＝7.77, p＜0.01, F＝9.68, p＜0.01). There was a significant difference between the shift groups and the control group(p＜0.05). 4. No difference in mental performance was seen between the first day and the last day of work in each case. An arithmatic test on the first day of the night shift revealed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝3.79, p＜0.05). There was a significant difference between the shift groups and the control group(p＜0.05) . The digital symbol substitution test and the arithmetic test on the last day of the night shift showed a significant difference among the control group, the weekly shift group, and the biweekly shift group(F＝3.68, p＜0.05, F＝5.55, p＜0.01), and both showed a significant difference between the shift groups and the control group(p＜0.05). Accordingly, this study showed that during night duty, the waking time, sleep- wake cycle, and fatigue increased and mental performance decreased compared with morning and evening duty. It was also found that the weekly shift group had a higher fatigue score on the sixth day of night duty as compared to the -first day, but the waking time, sleep- wake cycle, and mental performance revealed no difference for the duration of the night duty or between shift groups, and complete adaptation of temperature rhythm was achieved between the sixth and ninth day of night duty. It is possible to conclude from these results that for intermediate circadian type in a healthy young woman, a biweekly shift system is more compatible with the circadian timing system than weekly shift system.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.23-30
• /
• 2005

This paper describes a DLL(delay locked loop)-based multi-clock generator having the lower active stand-by power as well as a fast relocking after re-activating the DLL. for low power and high speed VLSI chip. It enables a frequency multiplication using frequency multiplier scheme and produces output clocks with 50:50 duty-ratio regardless of the duty-ratio of system clock. Also, digital control scheme using DAC enables a fast relocking operation after exiting a standby-mode of the clock system which was obtained by storing analog locking information as digital codes in a register block. Also, for a clock multiplication, it has a feed-forward duty correction scheme using multiphase and phase mixing corrects a duty-error of system clock without requiring additional time. In this paper, the proposed DLL-based multi-clock generator can provides a synchronous clock to an external clock for I/O data communications and multiple clocks of slow and high speed operations for various IPs. The proposed DLL-based multi-clock generator was designed by the area of $1796{\mu}m\times654{\mu}m$ using $0.35-{\mu}m$ CMOS process and has $75MHz\~550MHz$ lock-range and maximum multiplication frequency of 800 MHz below 20psec static skew at 2.3v supply voltage.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.9
• /
• pp.510-516
• /
• 1999

In this paper, a new high-powerfactor control method for boost-type rectifier is proposed, which removes the necessity of input current sensing. This method generates a sinewave duty template only from the line voltage waveform and rectifier output, and reduces reactive power remarkably utilizing three compensation coefficients which are determined through experiments. These compensations make the input current to be in phase with the input voltage all over the load range. A prototype boost-type rectifier is designed and experimental results are presented.