• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.111-117
• /
• 2014

Phytophthora blight caused by Phytophthora capsici Leonian is a dangerous disease threatening pepper growers worldwide. The efficacy of chemical control is generally low as the pathogen is soil-borne and rapidly spread by zoospores during the rainy season. Thus, based on the demand for resistant varieties, various good resistant sources, such as CM334, AC2258, and PI201234, have been reported and their inheritance of resistance studied by many different authorities. However, the mode of inheritance remains unclear, as 1 or 2 independent dominant genes, 3 genes, or multiple genes have all been reported as responsible for resistance. Recently, QTL mappings of the gene factors for resistance have been reported, and molecular markers for resistance used in breeding programs. With the release of many resistant commercial hybrid cultivars, differentiation of pathotypes of the pathogen is attracting interest among breeders and plant pathologists. Various authorities have already classified the pathogen strains into different races according to the inter-action between resistant host plants, including the source of resistance, such as CM334 and PI201234, and resistant commercial varieties and P. capsici isolates. However, no standard differential host sets have yet been established, so the results are good only for the pathogen strains used in the experiments. Thus, for breeding varieties with durable resist-ance, it is important to introduce resistance from different sources and use diverse local pathogen strains collected in the target area for distribution in a breeding program.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.394-400
• /
• 2008

Blast resistance of one hundred and thirty-one rice cultivars bred in Korea was tested with thirty Korean isolates and twenty-two Philippines isolates using three screening methods. In the blast nursery conducted in Korea and in the Philippines, average disease index of rice cultivars were 4.6 and 2.2, respectively. Seventy-nine cultivars showed different resistance reaction in Korea and in the Philippines, and 19 cultivars showed the same resistant reaction in two locations. In the seedling test, Korean blast isolates displayed different levels of virulence. 93-093, a Korean isolate, was compatible with 90 cultivars whereas 97-057 showed a compatible reaction with 13 cultivars. Twenty-three cultivars showed high level of resistance against Korean and Philippines isolates but Chucheongbyeo, Heugnambyeo, and Manmibyeo showed susceptible reaction to all blast isolates. Through the sequential planting test in Korea and in the Philippines, Palgongbyeo and Seomjinbyeo displayed durable resistance, and Nagdongbyeo and Gihobyeo showed high level of disease infection over the planting time. These results indicate that blast isolates collected in two countries have different genetic background and number of compatible isolates should be considered in definition the durability of rice cultivar to rice blast.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.2
• /
• pp.157-164
• /
• 2014

Ground granulated blast-furnace slag (GGBS) is a green construction material used to produce durable concrete. The secondary pozzolanic reactions can result in reduced pore connectivity; therefore, replacing partial amount of Portland cement (PC) with GGBS can significantly reduce the risk of sulfate attack, alkali-silica reactions and chloride penetration. However, it may also reduce the concrete resistance against carbonation. Due to the time consuming process of concrete carbonation, many researchers have used accelerated carbonation test to shorten the experimental time. However, there are always some uncertainties in the accelerated carbonation test results. Most importantly, the moisture content and moisture profile of the concrete before the carbonation test can significantly affect the test results. In this work, more than 200 samples with various water-cementitious material ratios and various replacement percentages of GGBS were cast. The compressive strength, electrical resistivity, chloride permeability and carbonation tests were conducted. The moisture loss and microstructure of concrete were studied. The partial replacement of PC with GGBS produced considerable improvement on various properties of concrete.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.87.1-87.1
• /
• 2010

Metallic bipolar plate is the one of the promising candidate material for PEMFC because of mechanical strength, low gas permeability, electrical and thermal conductivity. However, the corrosion is the main obstacle of metallic bipolar plate, and many investigations, especially coating on base metal, have been carried out to avoid corrosion. Gold is considered as the one of the best coating material because of its corrosion resistance and electrical conductivity. In this study, gold coated metallic bipolar plate was developed and evaluated. Due to our coating process, gold can be well-adhere to the base material, and hydrophobic material on its gold surface was coated by dipping method for better water management. To verify coating reliability, a single fuel cell(50cm2) was evaluated, and its durability over 4000hrs was demonstrated.

• Geomechanics and Engineering
• /
• v.3 no.3
• /
• pp.219-231
• /
• 2011

Waste fills resulting from coal mining should consist of large, free-draining sedimentary rocks fragments. The successful performance of these fills is related to the strength and durability of the individual rock fragments. When fills are made of shale fragments, some fragments will be durable and some will degrade into soil particles resulting from slaking and inter-particle point loads. The degraded material fills the voids between the intact fragments, and results in settlement. A laboratory program with point load and slake durability tests as well as thin section examination of sixty-eight shale samples from the Appalachian region of the United States revealed that pore micro-geometry has a major influence on degradation. Under saturated and unsaturated conditions, the shales absorb water, and the air in their pores is compressed, breaking the shales. This breakage was more pronounced in shales with smooth pore boundaries and having a diameter equal to or smaller than 0.060 mm. If the pore walls were rough, the air-pressure breaking mechanism was not effective. However, pore roughness (measured by the fractal dimension) had a detrimental effect on point load resistance. This study indicated that the optimum shales to resist both slaking as well as point loads are those that have pores with a fractal dimension equal to 1.425 and a diameter equal to or smaller than 0.06 mm.

• Coupled systems mechanics
• /
• v.6 no.3
• /
• pp.335-349
• /
• 2017

To cope with the demand on giant and durable buildings, reinforcement of concrete is a practical problem being extensively investigated in the civil engineering field. Among various reinforcing techniques, fiber-reinforced concrete (FRC) has been proven to be an effective approach. In practice, such fibers include steel fibers, polyvinyl alcohol (PVA) fibers, polyacrylonitrile (PAN) carbon fibers and asbestos fibers, with the length scale ranging from centimeters to micrometers. When advancing such technique down to the nanoscale, it is noticed that carbon nanotubes (CNTs) are stronger than other fibers and can provide a better reinforcement to concrete. In the last decade, CNT-reinforced concrete attracts a lot of attentions in research. Despite high cost of CNTs at present, the growing availability of carbon materials might push the usage of CNTs into practice in the near future, making the reinforcement technique of great potential. A review of existing research works may constitute a conclusive reference and facilitate further developments. In reference to the recent experimental works, this paper reports some key evaluations on CNT-reinforced cementitious materials, covering FRC mechanism, CNT dispersion, CNT-cement structures, mechanical properties and fire safety. Emphasis is placed on the interplay between CNTs and calcium silicate hydrate (C-S-H) at the nanoscale. The relationship between the CNTs-cement structures and the mechanical enhancement, especially at a high-temperature condition, is discussed based on molecular dynamics simulations. After concluding remarks, challenges to improve the CNTs reinforcement technique are proposed.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.28-35
• /
• 2014

The most widely used material in furniture is wood. It is not only because it has good machinability and can be easily accessed, but also it is eco-friendly and human-friendly. Such material has been continuously being used for furniture and its machining method has been being actively researched and developed. Lumber has and has developed its own machining method. The conventional lumber machining method is difficult to make various types of furniture because it focuses on solving lumber's own modification problem due to the swelling and shrinking, and durability. Considering such characteristic of the material, a method to make it light and durable has been being researched and possibilities were found in wooden ships. Wooden ships are ships made of lumber, and are light and strong to be used in water. Also, in order to reduce the water resistance, it has streamlined curves so is formatively beautiful. The elegant curves and light and strong structure showed sufficient possibility to be used in furniture. Thus, the purpose of this study is to find a method to make various shapes of lumber lightly and strongly, using the production method of wooden ships, and to use this production method in designing furniture to propose a new form and structure of bench design, differentiating from conventional monotypic furniture.

• Advances in materials Research
• /
• v.6 no.2
• /
• pp.221-231
• /
• 2017

The concept design of the typha strawbale masonry came up as a result of the urgent demand for a means of constructing sustainable buildings, both in rural and urban settlement, not only suitable for dwellers but for keeping farm products by structures that will respond to the environmental eco-system, coupled with the fact that such structures are also affordable, durable and easy to maintain during their service period. The effects of contact between plaster and the stacked strawbale of a masonry needs to be established and design optimization for durability and stability of the masonry be obtained. The assessment will involve the application of plaster materials (cement and natural earth) to the wall specimen panels. Past works have shown that plastered strawbale walls have adequate resistance against the appropriate vertical loads, and further showed that the earth plaster can bear higher stress than the cement plastered straw bale. There is the implication that the collapse or response of the earth-strawbale wall is significantly higher compared to that of cement-strawbale from other straw-based masonries. Therefore the allowable stresses of plastered typha strawbale shall be predicted for their optimum values using SAP2000. The stress stability of each masonry is obtained by analytical model using the best fit variables for the wall height and thickness.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.737-742
• /
• 2004

The purpose of this study is restoration for tearing strength of the durable press (DP) finished 100% cotton fabric by enzymatic treatment. Dimethylol Dihydroxy Ethylene Urea (DMDHEU) was used as a DP finish chemical. Enzymes (cellulase, pectinase, protease, lipolase) were selected based on their specific reaction activities. Ideal application of the enzymes for this work was to remove cross-links created by DMDHEU on the surface of the fibers to offer migration property between microstructures of cellulose, yet cross-links that exist inside of the fibers are still remained to impart effect of wrinkle resistance. Physical characteristics (tearing strength, wrinkle recovery, FT-IR) of enzyme treated samples were measured and compared. It was found out that, in case of enzyme treatment, most of enzymes didn't have a great effect on tearing strength, but, in case of Protease, tearing strength increased at DMDHEU 2% treatment. As a result of an experiment on wrinkle recovery of the textiles treated with enzyme making density of DMDHEU different whenever respective experiment was made, it was discovered that density of DMDHEU increased as wrinkle recovery increased and, in the relation to enzyme treatment especially in Lipase enzyme treatment, the lesser density of DMDHEU, the more wrinkle recovery increased.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.51-56
• /
• 2004

Conductive polymer blends and composites are widely used for different safety application such as electrostatic charge dissipation(ESD), electromagnetic interference(EMI) shielding, electrostatic prevention and safety chemical sensor. In order to prepare a impedance-type humidity sensor that is durable at high humidities and high temperature, electically conductive polymer blends based on diallyldimethylammonium chloride(DADMAC) and epoxy were prepared in this study. The polymer blends type conductive ionomer exhibits reaction each other DADMAC and epoxy in FT-IR and DSC analysis. The blends material was traced by new peak at 1600cm-1 and appeard improvement of thermal resistance by melting point shift. Alumina substrate was deposited a pair of gold electrodes by screen printing. The blend material were spin-coated with a thin film type on the surface of alumina substrate. The polymer bleld type sensor exhibits a linear impedance increasing better than DADMAC coated humidity sensor. Also it shows good sensitivity, low hysteresis and durability against high humidity.