• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.313-314
• /
• 2023

This paper summarized the safety diagnosis method in the field of durability among the structural safety suggested in the safety diagnosis manual of the reconstruction project and analyzed the safety diagnosis case. It is expected to be a reference material for safety diagnosis in the field of durability by pointing out cases that are wrong during existing safety diagnosis and cases where diagnostics are likely to make errors.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.24-31
• /
• 1995

This paper shows the fatigue durability test method for vehicle suspension systems. Durability should be assured for the safe driving during vehicle life cycle. A computer simulation for the vehicle dynamics was used to obtain dynamic loads that were required for the fatigue durability test. Durability tests were done for an Important load-carrying component of the suspension system. Stress analyses using stresscoat and strain gages were also done for the component. This study demonstrated an effective method for the fatigue durability test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.71-74
• /
• 2005

More than five pulleys are used in an automobile, such as crankshaft, water pump, air-con compressor, fan and power steering pump pulley. These pulleys are parts that need durability until retiring a car. But there is no design criterion for durability, so pulleys are designed by the experience of designer and trial and error. So, in this study, we carried out stress analysis at durability test condition and compared analysis results to durability test results. It is found that the design criterion for durability is defined as a safety factor and a safety factor is different according to the distance between the center line of v-grooves and the mating surface.

• 한국가스학회지
• /
• 제22권3호
• /
• pp.13-19
• /
• 2018

노출배관은 매설배관과 달리 바로 외기에 닿아있음으로 이에 대한 더욱 높은 내구 신뢰성이 요구 된다. 이를 위해 배관 시스템의 설계와 시공 시 명확한 세부 기술기준은 필수적이다. 하지만, 기존의 기술기준은 배관 특성을 고려한 내구성 평가가 되지 않아, 현장에서 많은 의문점을 제기했었다. 따라서, 본 연구를 통해서 기존 세부 기술기준을 개정하여 노출배관의 명확한 내구 안전성 확보방안을 제시하고자 한다.

• 한국안전학회지
• /
• 제22권3호
• /
• pp.51-56
• /
• 2007

In recent years, many research works have been carried out in order to obtain a more controlled durability and long-term performance of concrete structures in chloride containing environments. In particular, the development of new procedures for probability-based durability analysis/design has proved to be very valuable. Although there is still a lack of relevant data, this approach has been successfully applied to some new concrete structures. In this paper, the equation used for modelling of the chloride penetration was based on Fick's Second Law of Diffusion in combination with a time dependent diffusion coefficient. The probability analysis of the durability performance was performed by use of a Monte Carlo Simulation. The procedure was applied to an example based on limited data gathered in this country. The influences of each parameter on the durability of concrete structures are studied and some comments for durability design are given. The new procedure may be very useful in designing an important concrete structures in chloride containing environments. Also it may help to predict the service life of concrete structures under a given probability of failure.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.66-72
• /
• 2019

동력 집중식 고속 철도차량의 승차감과 주행 안정성 향상 방안으로서 채택한 관절형 대차는 차체와 결합된 기존 독립대차와 달리 객차 사이를 갱웨이 링에 의하여 연결한다. 갱웨이 링은 열차 주행 동안 객차분리를 방지하면서 객차사이 승객 이동에 대한 절대적 안전을 확보되어야 함에도 불구하고, 아직까지 정량적인 내구성 시험기준 설정이 미비하다. 따라서 동력 집중식 고속 철도차량의 승차감과 승객 안전성을 향상을 위해서는 관절형 대차 갱웨이 링에 대한 내구성 평가의 시험기준에 대한 체계적인 연구가 중요하다. 본 연구에서는 고속 철도차량 관절형 대차의 갱웨이 링에 대한 안전성을 검토하기 위하여, 열차 운행조건에 준한 전후, 좌우 및 수직의 3축 모드로부터 7가지 혼합모드 하중조건을 도출하였다. 이 하중조건하에 유한요소해석결과로부터 각 부품들의 안전율은 최소 2.4 이상이다. 또한 변형률-피로수명설계관점에서 내구성 해석을 통하여 피로안전성을 평가하였다. 본 갱웨이 링에 대한 내구성 시험은 혼합모드 하중조건하에 총 4단계의 1,000만 사이클을 수행하였다. 내구성 시험 후에 침투 탐상 검사기법을 이용하여 각 부품의 결함유무를 검토하였다.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.6-11
• /
• 2004

CNG buses were introduced in 2002 to reduce air pollution to the big cities. The durability and safety evaluation were performed for the NGV-2 type cylinders taken from two buses after 30 months of running. No external damage and no internal corrosion was observed on the container surfaces. Defect exceeding the allowable limit was not found in the UT test. Permanent volume expansion was about 1.2% which is much smaller than the required design limit. Cycling test showed no failure after 11,250cycles and burst pressures were still above the maximum design pressure. Both the longitudinal and circumferential failure mode were observed, where both the fracture strengths were far above the design limit. This study showed the present CNG fuel cylinders were safe enough for further usage.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.98-103
• /
• 2004

Shotcrete needs the enough durability without deterioration for life time. But shotcrete is being deteriorated according to aging like concrete by internal causes whithin itself and by external causes which can be physical, chemical, or mechanical. Durable shotcrete can be made by incresing the cement content, adding chemical and mineral admixtures and so on. So, in this study, chloride ion penetration test, freeze and thaw test, neutralization test were conducted to examine the durability characteristice of shotcrete with mineral admixtures such as silica fume, blast-furnace slag and fly ash. These results indicate that shotcrete with silica fume is durable. Therefore, the present study provides a firm base to make high performance shtcrete.