• Mycobiology
• /
• v.45 no.3
• /
• pp.178-183
• /
• 2017

Diabetes mellitus is a chronic disorder which affects millions of population worldwide. Global estimates published in 2010 reported the world diabetic prevalence as 6.4%, affecting 285 million adults. Foot ulceration and wound infection are major forms of disabilities arising from diabetic diseases. This study was aimed to develop a natural antimicrobial finishing on medical grade textile that meets American Association of Textiles Chemists and Colorists (AATCC) standard. The textile samples were finished with the ethanolic extract of Penicillium amestolkiae elv609, an endophytic fungus isolated from Orthosiphon stamineus Benth (common name: cat's whiskers). Endophyte is defined as microorganism that reside in the living plant tissue, without causing apparent disease symptom to the host. The antimicrobial efficacy of the ethanolic extract of P. minioluteum was tested on clinical pathogens isolated from diabetic wound. The extract exhibited significant inhibitory activity against 4 bacteria and 1 yeast with the minimal inhibitory concentration ranged from 6.25 to 12.5 mg/mL. The results indicate different susceptibility levels of the test microorganism to the ethanolic extract. However, the killing activity of the extract was concentration-dependent. The finished medical textile showed excellent antimicrobial efficacy on AATCC test assays. All the microbial cultures treated with the textile sample displayed a growth reduction of 99.9% on Hoheinstein Challenge Test. The wash durability of the finished textile was found good even after 50 washes with commercial detergent. Besides, the gas chromatography mass spectrometry analysis showed that 6-octadecenoic acid and diethyl phthalate were the main bioactive constituents of the extract. In conclusion, the developed medical textile showed good antimicrobial efficacy on laboratory tests. This work can be extended to in vivo trials for developing healthcare textile products for antimicrobial applications.

• Hwankyungkyoyuk
• /
• v.19 no.3
• /
• pp.20-39
• /
• 2006

The purpose of the study is to develop e-Learning contents of environmental education for middle school students. The contents were developed based on literature review, the analysis of domestic and foreign programs and e-Learning contents on environmental education and expert advice. There are five main characteristics. First, this program has 12 sessions and is divided into six parts: introduction, air, water, animals and plants, soil, and resources and energy. Second, the contents were developed with consideration of middle school students' consist of optimized for learners by analyzing the needs of middle school students. Third, each part consists of five steps: "open", "unfold", "foster", "strengthen & refine", and "addition." Fourth, the contents have been developed in line with SCORM, an international standard for distnt education, to ensure reusability, accessibility, interoperability, and durability. Fifth, the contents are developed for blending online and off-line education. Developed program evaluated by 8 environmental education experts according to 10 evaluation item of total contents and contents development structure. In result, it evaluated comparatively high score.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.79-86
• /
• 2018

Many countries have conducted extensive studies for biomass co-firing to enhance the durability of reactor on high-temperature corrosion. However, due to the complicated mechanisms of biomass co-firing, there have been limitations in accurately determining the current state of corrosion and predicting the potential risk of corrosion of power plant. In order to solve this issue, this study introduced Lab-scale corrosion system to analyze the corrosion characteristics of the A213 T91 material under the biomass co-firing conditions. The corrosion status of the samples was characterized using SEM/EDS analysis and mass loss measurement according to various biomass co-firing conditions such as corrosion temperature, $SO_2$ concentration, and corrosion time. As a result, the corrosion severity of A213 T91 material was gradually increased with the increase of $SO_2$ concentration in the reactor. When $SO_2$ concentration was changed from 0 ppm to 500 ppm, both corrosion severity and oxide layer thickness were proportionally increased by 15% and 130%, respectively. The minimum corrosion was observed when the corrosion temperature was $450^{\circ}C$. As the temperature was increased up to $650^{\circ}C$, the faster corrosion behavior of A213 T91 was observed. A213 T91 was observed to be more severely corroded by the effect of chlorine, resulting in faster corrosion rate and thicker oxide layer. Interestingly, corrosion resistance of A213 T91 tended to gradually decrease rather than increases as the oxide layer was formed. The results of this study is expected to provide necessary research data on boiler corrosion in biomass co-firing power plants.

• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.803-809
• /
• 2006

Korean traditional paper 'Hanji' made from the bark of the paper mulberry tree is a good handicraft material because of its high viscosity, durability, dyeability, toughness, flexibility, plasticity, and manipulability. Hanji has been used as a textile material such as cotton wool for protection and keeping us warm from cold weather. However, Hanji has many limitations, while other textile materials have many advantages of such as washability, being sunproof, and fast coloring. The purpose of this study is to review physical properties, formation ability, and dyeability of Hanji as a material of fashion accessary. The contents of this study are composed of 5 parts: 1. To introduce the necessities of this study, 2. To review a historical background of Hanji and to identify its physical characteristics as a fashion accessary material, 3. To review and to compare techniques such as bonding, quilting, knitting, creasing and holding, twisting, folding & braiding, paper pasting, coloring & cutting, and outwashing(?) in making Hanji fashion accessaries, 4. To review dyeing and finishing techniques to increase commercial value, 5. To identify the best fashion accessary materials made of Hanji. The most important characteristics of Hanji as a fashion accessary material are its toughness in a wet state, fast color fixing, and flexibility. Especially weaving and knitting are considered as the most desirable techniques to make fashion accessary products stronger and more practical.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.152-152
• /
• 2016

Anodizing is a technology to generate thicker and high-quality films than natural oxide films by treating metals via electrochemical methods. It is a technique to develop metals for various uses, and extensive research on the commercial use has been performed for a long time. Aluminum anodic oxide (AAO) is generate oxide films, whose sizes and characteristics depending on the types of electrolytes, voltages, temperatures and time. Electrochemical manufacturing method of nano structure is an efficient technology in terms of cost reduction, high productivity and complicated shapes, which receives the spotlight in diverse areas. The sulfuric acid was used as an anodizing electrolyte, controlling its temperature to $10^{\circ}C$. The anode was 5083 Al alloy with dimension of $5(t){\times}20{\times}20mm$ while the cathode was the platinum. The distance between the anode and the cathode was maintained at 3 cm. Agitation was introduced by magnetic stirrer at 300 rpm to prevent localized temperature rise that hinders stable growth of oxide layer. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition for $10^{\circ}C$, 10 vol.%, respectively. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant rate. In addition, using galvanostatic method, it was maintained at current density of $10{\sim}30mA/cm^2$ for 40 minutes. The cavitation experiment was carried out with an ultrasonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1 mm. The specimen after the experiment was cleaned in an ultrasonic, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the investigation, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with applied current density.

• Journal of Korean Elementary Science Education
• /
• v.27 no.2
• /
• pp.189-200
• /
• 2008

The purpose of this study is to find out the effects of learning that has applied instruction module utilizing ICT in project-based learning in elementary science classroom on improvement of the self-directed learning skills and the problem-solving skills. For this purpose, the project based learning instruction module utilizing ICT based was developed and conducted to 2 class consisting of 66 elementary students in the 6th grade to clarify the effects. As a result of the study, first, the instruction module utilizing ICT in project-based learning was effective in improving self-directed learning skills of students. As the subordinate effects of self-directed learning skills it showed improved effects in diagnosing desire to learn, setting goals, basic self-managing ability, selecting learning strategy, durability of practicing learning, making effort for result, and self-examination but it did not show improved effects in figuring out recognition of resources for Learning. Second, it was effective in improving the problem-solving skills of students. As the subordinate effects of problem-solving skills it showed improved effects in problem recognition, information gathering, analysis, thinking prior to dissemination, planning skill, and evaluation but it did not show effect on decision making, implementation & risk-taking and feedback.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.172-179
• /
• 2016

For an evaluation of service life in RC(Reinforced Concrete) structures, deterministic method and probabilistic method considering random variables of design parameters are usually adopted. In the work, surface chloride contents which vary with distance from sea shore and height are investigated from the previous research literature surveys, and they are considered for service life estimation. Through the analysis, the probabilistic method shows much lower results, which is due to variations of design parameters and very low intended durability failure. In the deterministic method, the structures within 250m and higher than 60m are evaluated to be free from chloride attack. In the probabilistic method, those higher than 60m in all the region and higher than 40m and 250m from sea shore are evaluated to satisfy the service life.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.99-106
• /
• 1995

Although lots of experimental studies of coal ash have been performed to study the utilization as construction materials, the environmental characteristics of coal ash are still qestionable. In this study, fly ash is examined to be classified according to Korean Environmental Standard and analized whether the batch test results are within the toler trance limit when utilized or treated as reclamation and earth work materials. The batch tests was performed to examine pH and contaminant contents. Consequently, fly ash is classified as non hazardous industrial waste. The pH value shows a strong alkalinity than the tolerance limit, but it is implied that fly ash can be used to neutralize the acid ground. All other items except pH satisfy the tolerance limit, In addition, a small quantity of additives(cement) which used to improve the poor geotechnical properties of coal ash, could decrease the pH value into the tolerance limit as well as improve strengtIL durability and permeability. It is concluded that when coal ash is used properly, there is no enviormental harmfulness as construction materials.

• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.323-329
• /
• 2012

A thermal management system of a proton exchange membrane fuel cell is taken charge of controlling the temperature of fuel cell stack by rejection of electrochemically reacted heat. Two major components of thermal management system are heat exchanger and pump which determines required amount of heat. Since the performance and durability of PEMFC system is sensitive to the operating temperature and temperature distribution inside the stack, it is necessary to control the thermal management system properly under guidance of operating strategy. The control study of the thermal management system is able to be boosted up with hardware in the loop simulation which directly connects the plant simulation with real hardware components. In this study, the plant simulation of fuel cell stack has been developed and the simulation model is connected with virtual data acquisition system. And HIL simulator has been developed to control the coolant supply system for the study of PEMFC thermal management system. The virtual data acquisition system and the HIL simulator are developed under LabVIEWTM Platform and the Simulation interface toolkit integrates the fuel cell plant simulator with the virtual DAQ display and HIL simulator.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.118-124
• /
• 2010

In order to develop commercial model of 10kW dish-Stirling solar thermal power system, modification for the exiting facility was taken for a year as a Leading Project in KIER. During the project, solar tracking system, control and monitoring system and high durability reflector were developed and long term operation were performed. The solar tracking system was tested for four months to investigate the degree of precision and adapted to the control system for an actual operation from October in 2009. The sun tracking accuracy of ${\pm}4$ mrad using modified control system was obtained and the system operated successfully during the experimental period. The monitoring system displays engine pressure, electric generation amounts, generator RPM, receiver temperatures, and etc. from Stirling engine and weather data of Direct Normal Irradiation, Horizontal Global Insolation, wind speed & direction, and atmosphere temperature from weather station. According to the operating results in a clear sky day, electric power of 6,890 W was generated at the DNI value of 850 W/$m^2$ and the averaged solar-to-electricity efficiency during a whole day reached to 18.99%. From the overall operating results, linear power generation trend could be observed with increasing DNI value. The solar-to-electricity efficiency achieved to 19% around the DNI value of 700 W/$m^2$ and increased to 20% when the DNI value goes up to 900 W/$m^2$.