• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.237-243
• /
• 2002

This paper studies the channel estimation schemes of Time Division Duplex (TDD) Code Division Multiple Access (CDMA) system with a parallel interference canceller (PIC) in multi-path fading channels. furthermore, the effective interpolation method which maintains the flexibility of UTRA TDD mode is proposed. By Monte Carlo simulations, it is verified that the proposed interpolation method can be used in order to obtain the proper performance of a multi-stage PIC and in order to reduce the required Eb/No for a given bit error rate (BER).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.984-995
• /
• 1996

Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.295-300
• /
• 2001

A variety of high voltage DC power supplies employing the high frequency inverter are difficult to achieve soft switching considering a quick response and no overshoot response under the wide load variation ranges which are used in medical-use x-ray high voltage generator from 20kV to 150kV in the output voltage and from 0.5mA to 1250mA, respectively. The authors develops soft switching high voltage DC power supply designed for x-ray power generator applications, which uses series resonant inverter circuit topology with a multistage voltage multiplier instead of a conventional high voltage diode rectifier connected to the second-side of a high-voltage transformer with a large turn ratio. A constant on-time dual mode frequency control scheme operating under a principle of zero-current soft switching commutation is described. Introducing the multistage voltage multiplier, the secondary transformer turn-numbers and stray capacitance of high-voltage transformer is effective to be greatly reduced. It is proved that the proposed high-voltage converter topology with dual mode frequency modulation mode control scheme is able to be the transient response and steady-state performance in high-voltage x-ray tube load. The effectiveness of this high voltage converter is evaluated and discussed on the basis of simulation analysis and observed data in experiment.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.496-503
• /
• 2010

The implementation of a RF transceiver for WRAN(Wireless Regional Area Network) system based on IEEE 802.22 standard using Cognitive Radio technology is presented in this paper. A CMOS RF transceiver IC for WRAN system operates in VHF/UHF(54~862MHz) broadband, and employs dual-path direct-conversion configuration and the in-band harmonic distortions are effectively suppressed by exploiting the dual-path direct conversion architecture. For 64QAM(3/4 coding rate) OFDM signal, an EVM of <-31.4dB(2.7%) has been achieved at 10dBm off-chip PA output power and the total chip area with pads is 12.95 mm2. The experimental results show that the proposed CMOS RF transceiver IC has perfect performance for WRAN system based on TDD(Time Division Duplex) mode.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.7-15
• /
• 2007

In wireless communication networks, single-radio single-channel architecture degrades throughput and end-to-end delay due to half-duplex transmission of wireless node and route intra interference. Also, In contention-based MAC (Medium Access Control) architecture, channel contention reduces throughput and packet collision enlarges end-to-end delay. In this paper, we use multi-radio multi-channel architecture which will make wireless node to operate in full duplex mode, and exclude route intra interference. Based on this architecture, we propose a new link metric, ccf which reflects the characteristics of a contention-based wireless link, and propose a routing path metric MCCR considering channel switching delay and route intra interference. MCCR is compared with MCR by simulation, the performance of a route established by MCCR outperforms the performance of a route by MCR in terms of throughput and end-to-end delay.

• Journal of Korea Multimedia Society
• /
• v.18 no.4
• /
• pp.533-540
• /
• 2015

We study relay selection in decode-and-forward (DF)-based relay networks consisting of a source, a destination, an eavesdropper, and multiple relays, where each terminal has a single antenna and operates in a half-duplex mode. In these networks, it is desirable to protect the confidential message from the source to the destination against the eavesdropper with the help of a single selected relay. Specifically, we begin by investigating DF-based networks for the scenario instantaneous signal-to-noise ratios (SNRs) related to the eavesdropper are available. For the scenario, we propose relay selection to maximize the secrecy rate of DF-based networks with and without direct-paths, and we derive the exact secrecy outage probabilities in closed-form.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.26-35
• /
• 1997

In this paper, a VHDL implementation method for the internet protocol (IP) placed on top of ATM, so called IP over ATM, is presented. The proposed implementation method employs a parallel processing architecture to reduce the processing time and offers 155.52Mbps (STM-1) interface with the full-duplex mode for the ATM-based network. Furthermore, in order to minimize the search time for the table look-up, a LANCAM-based structure combining the routing table with the ATMARP table is proposed. The VHDL simulation results show that this proposed method can transmit (receive) at 155.52Mbps with delays of 48.5 clocks (29.5clocks).

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.274-279
• /
• 2007

We fabricated and characterized an optical delay line for optical coherence tomography (OCT). The delay line was composed of a cylindrical piezoelectric transduce (PZT) and a single mode optical fiber. The OCT system used a duplex scanning optical delay line which was symmetrically driven in the reference and sample arms. We showed that the sinusoidal-wave was superior to a triangular-wave for driving the optical delay line for scanning depth and repeatability.