• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.187-192
• /
• 2016

일반설계에서 탄성거동을 전제로 구조물을 설계하는 것과 달리 내진설계는 구조물의 소성거동을 규명하고 조정하여 붕괴를 방지하는 것이 목적이다. 일반교량의 경우에 요구되는 붕괴방지수준은 교량의 특정한 구조부재의 소성거동으로 낙교를 방지하여 지진발생 이후에 긴급차량의 통과를 가능하게 하는 것이다. 이러한 소성거동은 연결부분 또는 교각기둥에 제한되고 각 경우에 적절한 조치가 요구된다. 도로교설계기준은 교각기둥에서 소성힌지를 형성하여 연성붕괴기구를 구성하는 설계방식과 함께 철근콘크리트 교각을 하부구조로 하는 교량을 대상으로 연결부분의 항복을 이용하여 취성붕괴기구를 구성하는 연성도 내진설계를 부록으로 제시하고 있다. 이 연구에서는 철근콘크리트 교각기둥과 강재받침으로 설계된 일반교량을 선정하고 연성붕괴기구와 취성붕괴기구를 모두 고려한 붕괴방지 설계절차 및 도로교설계기준에 요구되는 수정사항을 제안하였다.

• 한국전산구조공학회논문집
• /
• 제27권3호
• /
• pp.163-172
• /
• 2014

일반교량 내진설계의 목적은 붕괴방지설계이고 도로교설계기준 내진설계편은 교량구조의 연성파괴메카니즘을 구성하는 설계방식을 제시하고 있다. 그러나 구조형식 또는 현장여건에 의해 연성파괴메카니즘을 구성하는 것이 비합리적인 경우 차선책으로 취성파괴메카니즘을 구성하여 붕괴방지설계를 수행할 수 있다. 연성파괴메카니즘을 구성하는 기존 설계방식과 함께 내진설계편은 연성도 내진설계를 부록으로 제시하고 있다. 연성도 내진설계는 철근콘크리트 교각으로 구성되는 교량에 적용하며 설계자가 하부구조의 소요응답수정계수를 결정하고 이로부터 심부구속철근을 설계하는 방식이다. 이 연구에서는 철근콘크리트 교각기둥과 강재받침으로 설계된 일반교량을 선정하여 기존 설계방식과 연성도 내진설계를 모두 적용한 결과로부터 차이점을 확인하고 설계자가 내진설계를 수행하는 과정에서 두 설계방식을 모두 고려하는 설계절차를 제안하였다.

• Structural Engineering and Mechanics
• /
• 제1권1호
• /
• pp.31-46
• /
• 1993

The motivations of the application of shakedown analysis to the earthquake-resistant design of ductile moment-resisting steel structures are presented. The problems which must be solved with this application are also addressed. The illustrative results from a series of static and time history nonlinear analyses of one-bay three-story steel frame and the related discussions have shown that the incremental collapse may be the critical design criterion in case of earthquake loading. Based on the findings, it was concluded that the inelastic excursion mechanism for alternation load pattern, such as in earthquake, should be the sidesway mechanism of the whole structure for the efficient mobilization of the structural energy dissipating capacity and that the shakedown analysis technique can be used as a tool to ensure this mechanism.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.375-387
• /
• 2018

This paper presents a review on progressive collapse mechanism of steel framed buildings exposed to fire. The influence of load ratios, strength of structural members (beam, column, slab, connection), fire scenarios, bracing systems, fire protections on the collapse mode and collapse time of structures is comprehensively reviewed. It is found that the key influencing factors include load ratio, fire scenario, bracing layout and fire protection. The application of strong beams, high load ratios, multi-compartment fires will lead to global downward collapse which is undesirable. The catenary action in beams and tensile membrane action in slabs contribute to the enhancement of structural collapse resistance, leading to a ductile collapse mechanism. It is recommended to increase the reinforcement ratio in the sagging and hogging region of slabs to not only enhance the tensile membrane action in the slab, but to prevent the failure of beam-to-column connections. It is also found that a frame may collapse in the cooling phase of compartment fires or under travelling fires. This is because that the steel members may experience maximum temperatures and maximum displacements under these two fire scenarios. An edge bay fire is more prone to induce the collapse of structures than a central bay fire. The progressive collapse of buildings can be effectively prevented by using bracing systems and fire protections. A combination of horizontal and vertical bracing systems as well as increasing the strength and stiffness of bracing members is recommended to enhance the collapse resistance. A protected frame dose not collapse immediately after the local failure but experiences a relatively long withstanding period of at least 60 mins. It is suggested to use three-dimensional models for accurate predictions of whether, when and how a structure collapses under various fire scenarios.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.185-189
• /
• 2017

일반교량 내진설계의 목적은 지진발생 직후에 긴급차량의 통과를 허용하도록 하는 '붕괴방지설계'의 수행이다. 도로교설계기준은 연성구조를 구성하여 '붕괴방지설계'를 수행하는 규정을 제시하고 있으며 이 과정에서 연결부분과 하부구조에 적용하는 응답수정계수가 핵심적인 역할을 한다. 하부구조 응답수정계수의 경우 도로교설계기준은 연성과 여용력을 고려한 계수인 반면 AASHTO LRFD 교량설계기준은 교량의 중요도를 핵심, 중요 및 일반으로 구분한 인위적인 인자를 추가로 반영한 계수를 제시하고 있다. 이 연구에서는 강재받침과 철근콘크리트 교각기둥으로 구성된 일반교량을 선정하고 도로교설계기준의 설계조건과 함께 하부구조 응답수정계수를 차등 적용하는 경우의 설계결과를 비교, 검토하였으며 이로부터 하부구조 응답수정계수의 차등 적용 시 설계기준에 요구되는 보완사항을 제시하였다.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.181-187
• /
• 2009

내진 설계기준이 도입된 이후, 신설교량에 대한 내진 설계의 시행은 물론 기존교량의 내진 성능 검토에 의한 내진 성능 확보가 요구되고 있다. 기존교량의 내진 성능 확보 또한 내진 설계의 기본개념에 따라 붕괴방지수준을 만족하여야 하며, 확보방안으로는 교량의 중요도와 형식에 따라 보강규모가 다른 여러 가지 방안이 제시되어야 한다. 현재 일반교량의 경우 받침의 교체, 교각의 보강 및 전단키 설치 등의 보강방안이 내진 성능 향상 및 확보 방안으로 가장 많이 연구, 적용되고 있는 상황이다. 이 연구에서는 내진 설계가 수행되지 않은 일반적인 기존 교량은 해석대상교량으로 선정하고, 붕괴방지 수준을 만족하기 위해 연성파괴메카니즘을 확보하도록 기존교량의 설계변경을 수행하고 내진 성능을 검토하였다. 기존교량의 경우, 하부구조 교각기둥의 설계단면 결정 및 상/하부구조 연결부 받침의 기능변경 등 교량시스템의 재 설계에 의해 내진 성능을 확보할 수 있다는 것을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4647-4658
• /
• 2023

In this paper, elastic-plastic fracture mechanics analysis is performed to determine the critical crack sizes of the multipurpose canister (MPC) manufactured using austenitic stainless steel under dynamic loading conditions that simulate drop accidents. Firstly, dynamic finite element (FE) analysis is performed using Abaqus v.2018 with the KORAD (Korea Radioactive Waste Agency)-21 model under two drop accident conditions. Through the FE analysis, critical locations and through-thickness stress distributions in the MPC are identified, where the maximum plastic strain occurs during impact loadings. Then, the evaluation using the failure assessment diagram (FAD) is performed by postulating an external surface crack at the critical location to determine the critical crack depth. It is found that, for the drop cases considered in this paper, the principal failure mechanism for the circumferential surface crack is found to be the plastic collapse due to dominant high bending axial stress in the thickness. For axial cracks, the plastic collapse is also the dominant failure mechanism due to high membrane hoop stress, followed by the ductile tearing analysis. When incorporating the strain rate effect on yield strength and fracture toughness, the critical crack depth increases from 10 to 20%.

• International Journal of Concrete Structures and Materials
• /
• 제10권4호
• /
• pp.479-497
• /
• 2016

Many experimental studies have evaluated the in-plane behavior of reinforced concrete frames in order to understand mechanisms that resist progressive collapse. The effects of transverse beams, frames and slabs often are neglected due to their probable complexities. In the present study, an experimental and numerical assessment is performed to investigate the effects of transverse beams on the collapse behavior of reinforced concrete frames. Tests were undertaken on a 3/10-scale reinforced concrete sub-assemblage, consisting of a double-span beam and two end columns within the frame plane connected to a transverse frame at the middle joint. The specimen was placed under a monotonic vertical load to simulate the progressive collapse of the frame. Alternative load paths, mechanism of formation and development of cracks and major resistance mechanisms were compared with a two-dimensional scaled specimen without a transverse beam. The results demonstrate a general enhancement in resistance mechanisms with a considerable emphasis on the flexural capacity of the transverse beam. Additionally, the role of the transverse beam in restraining the rotation of the middle joint was evident, which in turn leads to more ductile behavior. A macro-model was also developed to further investigate progressive collapse in three dimensions. Along with the validated numerical model, a parametric study was undertaken to investigate the effects of the removed column location and beam section details on the progressive collapse behavior.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1329-1335
• /
• 2005

An aluminum or CFRP (Carbon Fiber ReinfDrced Plastics)is representative one of light-weight materials but its axial collapse mechanism is different from each other. The aluminum member absorbs energy by stable plastic deformation, while the CFRP member absorbs energy by unstable brittle failure with higher specific strength and stiffness than those in the aluminum member. In an attempt to achieve a synergy effect by combining the two members, aluminum CFRP compound square members were manufactured, which are composed of aluminum members wrapped with CFRP outside aluminum square members with different fiber orientation angle and thickness of CFRP, and axial collapse tests were performed fur the members. The axial collapse characteristics of the compound members were analyzed and compared with those of the respective aluminum members and CFRP members. Test results showed that the collapse of the aluminum CFRP compound member complemented unstable brittle failure of the CFRP member due to ductile characteristics of the inner aluminum member. The collapse modes were categorized into four modes under the iuluence of the fiber orientation angle and thickness of CFRP. The absorbed energy Per unit mass, which is in the light-weight aspect was higher in the aluminum CFRP compound member than that in the aluminum member and the CFRP member alone.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.330-337
• /
• 2002

The objective of the earthquake resistant design of structures is to satisfy on the one side the minimization of damage requirement under earthquakes with high probability of occurrence during the design life and on the other side the no collapse requirement under the design seismic event with low probability of occurrence. The two requirements are satisfied with the minimum strength of substructure as well as the ductile failure mechanism presented in the codes. In this study seismic performance is evaluated with two bridges which have steel box superstructures and T type, II type piers as substructures. In order to satisfy the two requirements redesign of both substructures and steel bearings are carried out.