• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1541-1547
• /
• 2005

In this paper, Dualband internal antenna for GSM/DSC handset is proposed. The antenna has a size of about $38mm{\times}90mm{\times}1mm$, giving a total mobile phone PCB for support and fold type patch of about $30mm{\times}8mm{\times}3.2mm$. This antenna characteriatic facilitates the fine-tuning of the two operating frequencies of 909MHz and 1762MHz in the dualband design. The measured radiation pattern in the E-plane and H-plane for operating frequencies of 909MHz and 1762MHz is compared and analyzed. The designed and fabricated two band internal antenna for GSM/DSC handset have a gain between 0dBi and 2.0dBi at all bands. Also, the electric firld distribution and directivity on human head caused by portable phone is analyzed. An analysis model is composed of a human head model and the antenna mounted on the same ground plane as portable telephone size.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.29-36
• /
• 2005

Many novel designs of planar antennas for related applications such as internal mobile phone antennas, base station antennas, WLAN or Bluetooth antennas, and so on, have been reported very recently, especially since the year 2000. In this thesis, Dualband internal antenna for GSM/DSC handset is proposed. The antenna has a size of about 38mm$\times$90mm$\times$1mm, giving a total mobile phone PCB for support and fold type Patch of about 30mm$\times$8mm$\times$3.2mm. This antenna characteristic facilitates the fine-tuning of the two operating frequencies of 909MHz and 1762MHz in this dualband design. The measured radiation pattern in the E-plane and H-plane for operating frequencies of 909MHz and 1762MHz is compared and analyzed. The designed and fabricated two band internal antenna for GSM/DSC handset have a gain between 0dBi and 2.0dBi at all bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.900-905
• /
• 2006

In this paper, PIFA antenna for $2.40{\sim}2.482GHz\;and\;5.75{\sim}5.85GHz$ is designed, fabricated, and measured. The prototype consist of hair-pin and short-pin. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are hair-pin length, width, position, air-gap height, and feed point position. From these parameters optimized, a PIFA antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication PIFA antenna is 2.37GHz and 5.86GHz bandwidth for approximately 90MHz with 350MHz(VSWR<2.0) and the gain is $1.91{\sim}4.37dBi$. H-plan and E-plan at 2.4GHz and 5.8GHz are shown as $52.83^{\circ},\;85.90^{\circ}\;and\;68.68^{\circ},\;52.143^{\circ}$ respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.532-535
• /
• 2003

In this paper, we made study for plastic chip antenna, the plastic is Formax with the circle of PVC and its electric characteristics are dielectric constant 1.9, surface current $10{\Omega}$. The proposed antenna same as the conventional antenna are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage are attractive for application in mobile antenna. We study the dual-band plastic chip antenna resonated at 800Mhz and 1800Mhz. From this study results, we feel confident of application for mobile phone antenna.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1420-1421
• /
• 2008

In this paper, a dual band microstrip filter is designed for RFID Application. Both magnetic and electric coupling structures are implemented to provide high performance passband response. The measured results demonstrate that reflection factor is 20dB and 15dB at 912MHz and 2450MHz. The measured loss is 2.6dB and 2.8dB at 912MHz and 2450MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.788-793
• /
• 2004

This paper proposes new configuration for the dual power amplifier that operates at 5.8 GHz for the wireless LAN and 1.8 GHz for the PCS. It dose not select the input signal but amplify the dual band signals simultaneously. Broadband diplexer is used at the input to separate the dual band signals. Output power of each amplifier is 1 W. The PBG is employed to improve the performance of power amplifier. Generally, the PBG is employed at the end of output matching network. But in this paper, the PBG is employed in the load pull output matching circuit of amplifer to maximize the output power.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.105-110
• /
• 2005

In this paper, a new technique to reduce the phase noise in microwave oscillators is proposed using the resonant characteristics of the Photonic Bandgap(PBG). We applied PBG structure to ground of the microstrip line resonator with the low Q(Quality factor). Therefore, we improved about 10 dBc in contrast to phase noise characteristic of the conventional microstrip line oscillator at 2.4 GHz ＠ 100 MHz offset. Output power is 7.09 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.186-196
• /
• 2000

In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.49-56
• /
• 2004

A new readout circuit(ROIC) for linear HgCdTe 64${\times}$2 two-color Infrared (IR) detector is described. This circuit is based on the buffered direct injection(BDI) technology with high injection efficiency. By using saturation current isolation circuit, the proposed ROIC removed the problems that LWIR(Long Wavelength InfraRed) signal distort when MWIR(Middle Wavelength InfraRed) signal saturates so that new ROIC has larger measurable temperature range about 120k than that of previous circuit and it is also tolerant for dead pixel in MWIR detector. The designed circuit was fabricated using 0.6um 2-poly 3-metal CMOS process. We measured that the designed circuit outputs MWIR signal and LWIR signal simultaneously and saturation current isolationcircuit also operates well. Next, measured noise was about 53uV at room temperature and it can be assumed that designed circuit can satisfy nearly 95% BLIP condition at 77K.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.66-73
• /
• 2010

This paper proposes the frequency multiplier using diplexer based on CRLH transmission line with dualband characteristic. The diplexer is separated the output signals of harmonic generator, which is generated the harmonic signals using nonlinear device. The diplexer consists of the inphase power divider, 0o/90o phase controller and dual-band quadrature hybrid coupler. This send out the selecting output signals of the harmonic signals and suppresses out of signals. To validate a function of multiplier, the harmonic generator and diplexer with 2 GHz and 3 GHz operating frequency range is implemented. As a result, the proposed frequency multiplier is operated normally.