This research compared and analyzed the heart rate of the patient in which the LVEF value is 40% less than and normal patient. When as for LVEF 40% or less becomes to each heart rate and LVEF in a relation, we can know that the time to reach 100HU hangs long. Therefore, in patients, that is 40% less than, when setting up the Premonitoring delay, we could know to could give 5 primary solid phrases. It is seen that subsequently an addition injected 40cc as to Saline, to all patients by 4cc/sec speeds after injecting the capacity of Scan time ${\times}$ 4cc + 30cc with 4cc/sec speeds. And HR excludes 80 or greater in 40% less than, the contrast agent shows the large-scale difference. In addition, in 40% less than, it could predict that the time difference was big and the contrast agent was already out in the Left ventricle Wash- when the contrast agent reached 100HU and Scan was started There is a wide difference between under 40% LVEF and normal. when starting scan from low LVEF patients. So, Injection contrast media protocol Should be determined to CCTA. And then In case of low LVEF is recommended to more low Pitch than routine Pitch because we should reduce scan failed in accordance with low LVEF.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.6
/
pp.696-701
/
2018
The nitrogen oxides generated during combustion reactions have a great influence on the generation of acid rain and fine dust. As an NOx reduction method, exhaust gas recirculation combustion using Coanda nozzles capable of recirculating a large amount of exhaust gas with a small amount of air has recently been utilized. In this study, for the burner outlet with dual end opening, the use of a recirculation burner was investigated for the distribution of the pressure, streamline, temperature, combustion reaction rate and nitrogen oxides using computational fluid analysis. The gas mixed with the combustion air and the recirculated exhaust gas flow in the tangential direction of the circular cylinder burner, so that there is a region with low pressure in the vicinity of the fuel nozzle exit. As a result, a reverse flow is formed in the central portion of the burner near the center of the circular cylinder burner and the exhaust gas is discharged to the outside region of the circular cylinder burner. The combustion reaction occurs on the right side of the burner and the temperature and NOx distribution are relatively higher than those on the left side of the burner. It was found that the average NOx production decreased from an air flow ratio of 1.0 to 1.5. When the air flow ratio is 1.8, the NOx production increases abruptly. It is considered that the NOx production reaction increases exponentially with temperature when the air ratio is more than 1.5 and the NOx production reaction rate increases rapidly on the right-hand side of the burner.
As a childcare program of TaeHwa Christian Women's Institution in 1921, the childcare system in Korea was incepted. Since then, the political foothold of childcare system has steadily been advancing to provide high quality services to young children. In almost a hundred-year-history of public childcare in Korea, depending on the changes enforced on the related laws and regulations and varying perspectives over time, the administration office accountable for childcare policies has been authorized to the Ministries of Health, Social Affairs, Education, Labor, Home Affairs, Rural Development Administration, and/or others. But as of 1991, under the enactment of Infant and Child Care Act, it was changed to be administered by the unified authority of the Health and Social Welfare Ministry. Then, in 2004 and 2007, its statutory authority, respectively, transferred to the Ministry of Gender Equality and Family and back to the Ministry of Health and Social Welfare. Staring of the Infant and Child Care Act in 1991, Korean childcare policies have been managed by the dual systems of the Education Ministry and the Health and Social Welfare Ministry each holding jurisdiction over kindergartens and childcare centers, respectively. Faced with the recent marked decline of birth rate, diverse childcare policies are currently implemented in the pursuit of finding means to enhance the quality of childcare and to develop policies for the restoration of the low birth rate. This study presented distinct features of current childcare policies and discussed about future directions and challenges of these policies.
Due to the growth in industrialization, potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. There are a number of approaches to in-situ remediation that are used in contaminated sites for removing contaminants. These include soil flushing, dual phase extraction, and soil vapor extraction. Among these techniques, soil flushing was the focus of the investigation in this paper. Incorporated technique with PVDs has been used for dewatering from fine-grained soils for the purpose of ground improvement by means of prefabricated vertical drain systems. The laboratory model tests were performed by using the flushing tracer solutions for silty soils and recorded the tracer concentration changes with the elapsed time and flow rates. The modeling was intended to predict the effectiveness and time dependence of the remediation process. Modeling has been performed on the extraction, considering tracer concentration and laboratory model test characteristics. The computer model used herein are SEEP/W and CTRAN/W, this 2-D finite element program allows for modeling to determine hydraulic head and pore water pressure distribution, efficiency of remediation for the subsurface environment. It is concluded that the coefficient of permeability of contaminated soil is related with vertical velocity and extracted flow rate. The vertical velocity and extracted flow rate have an effect on dispersivity and finally are played an important role in-situ soil remediation.
Journal of the Korea Academia-Industrial cooperation Society
/
v.7
no.6
/
pp.1047-1055
/
2006
We patterned nano-width lines on a super hard bulk diamond substrate by varying the ion beam current and ion beam sources with a dual beam field ion beam (FIB). In addition, we successfully fabricated two-dimensional nano patterns and three-dimensional nano plate modules. We prepared nano lines on a diamond and a silicon substrate at the beam condition of 30 kV, 10 pA $\sim$ 5 nA with $Ga^+$ ion and $H_2O$ assisted ion sources. We measured each of the line-width, line-depth, etched line profiles, etch rate, and aspect ratio, and then compared them. We confirmed that nano patterning was possible on both a bulk diamond and a silicon substrate. The etch rate of $H_2O$ source can be enhanced about two times than that of Ga source. The width of patterns on a diamond was smaller than that on a silicon substrate at the same ion beam power The sub-100 nm patterns on a diamond were made under the charge neutralization mode to prevent charge accumulation. We successfully made a two-dimensional, 240 nm-width text of the 300-lettered Lord's Prayer on a gem diamond with 30 kV-30 pA FIB. The patterned text image was readable with a scanning electron microscope. Moreover, three dimensional nano-thick plate module fabrication was made successfully with an FIB and a platinum deposition, and electron energy loss spectrum (EELS) analysis was easily performed with the prepared nano plate module.
Da-Yeong, Hong;Jeong, Lee;Jun-Ho, Lee;Jae-Won, Mun;Han-Saem, Oh;Yu-Won, Jeong;Seong-Hyun, Jin;Jong-Min, Hong;In-Ja, Lee
Journal of radiological science and technology
/
v.46
no.1
/
pp.1-8
/
2023
As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.
Bordetella (B.) bronchiseptica, Mycoplasma (M.) cynos, and M. canis are the major bacterial pathogens that cause canine infectious respiratory disease complex (CIRDC). In this study, we developed a triplex real-time polymerase chain reaction (tqPCR) assay for the differential detection of these bacteria in a single reaction. The assay specifically amplified three bacterial genes with a detection limit of below 10 copies/reaction. The assay showed high repeatability and reproducibility, with coefficients of intra- and inter-assay variations of less than 1%. The diagnostic results of the assay using 94 clinical samples from household dogs with CIRDC clinical signs, the prevalence of B. bronchiseptica, M. cynos, and M. canis was 22.3%, 18.1%, and 20.2%, respectively, indicating that the diagnostic sensitivity was comparable to those of previously reported qPCR assays. The dual infection rate of B. bronchiseptica and M. cynos, B. bronchiseptica and M. canis, and M. cynos and M. canis was 5.3%, 7.4%, and 3.1%, respectively. Moreover, the triple infection rate of B. bronchiseptica, M. cynos, and M. canis was 2.1%. These results indicate that coinfections with B. bronchiseptica, M. cynos, and M. canis have frequently occurred in the Korean dog population. The newly developed tqPCR assay in the present study will be a useful tool for etiological and epidemiological studies on these three CIRDC-associated bacterial pathogens. The prevalence and coinfection data revealed through this study will contribute to expanding knowledge on the epidemiology of CIRDC in the recent Korean dog population.
As the Korean economy grew, employment expanded steadily, with the number of economically active people increasing and the employment-to-population rate also increasing. However, the working age population started to decline in 2017, and the employment of women and young people has been sluggish. The proportion of non-salaried workers in Korea is much higher than in other OECD countries, and is also excessive, considering Korea's income levels. In addition, the proportion of non-regular workers and the proportion of workers employed at small companies are particularly high among salaried workers. In light of these characteristics of Korean employment, the urgent problems facing the employment structure can be summarized by the deepening dual structure of the labor market, the increase in youth unemployment, sluggish female employment figures, and an excessive share of self-employment. Overall, it is seen that labor market duality is the main structural factor of the employment problems in Korea. Therefore, in order to fundamentally address this employment problem, it is necessary to concentrate policy efforts on alleviating labor market duality.
Dong Kyu Kim;Joon Ho Kwon;Kichang Han;Man-Deuk Kim;Gyoung Min Kim;Sungmo Moon;Juil Park;Jong Yun Won;Hyung Cheol Kim;Sei Hyun Chun;Seung Myeon Choi
Korean Journal of Radiology
/
v.24
no.5
/
pp.424-433
/
2023
Objective: To assess the safety and efficacy of balloon dilatation under dual guidance using fluoroscopy and bronchoscopy for treating bronchial stenosis following lung transplantation (LT), and to elucidate the factors associated with patency after the procedure. Materials and Methods: From September, 2012, to April, 2021, 50 patients (mean age ± standard deviation, 54.4 ± 12.2 years) with bronchial stenosis among 361 recipients of LT were retrospectively analyzed. The safety of balloon dilatation was assessed by evaluating procedure-related complications. Efficacy was assessed by evaluating the technical success, primary patency, and secondary patency. Primary and secondary cumulative patency rates were calculated using the Kaplan-Meier method. The factors associated with patency after the procedure were evaluated using multivariable Cox hazard proportional regression analysis. Results: In total, 65 bronchi were treated with balloon dilatation in 50 patients. The total number of treatment sessions was 277 and the technical success rate was 99.3% (275/277 sessions). No major procedure-related complications were noted. During the mean follow-up period of 34.6 ± 30.8 months, primary patency was achieved in 12 of 65 bronchi (18.5%). However, the patency rate improved to 76.9% (50 of 65 bronchi) after repeated balloon dilatation (secondary patency). The 6-month, 1-year, 3-year, and 5-year secondary patency rates were 95.4%, 90.8%, 83.1%, and 78.5%, respectively. The presence of clinical symptoms was a significant prognostic factor associated with reduced primary patency (adjusted hazard ratio [HR], 0.465; 95% confidence interval [CI], 0.220-0.987). Early-stage treatment ≤ 6 months (adjusted HR, 3.588; 95% CI, 1.093-11.780) and prolonged balloon dilatation > 5 min (adjusted HR, 3.285; 95% CI, 1.018-10.598) were associated with significantly higher secondary patency. Conclusion: Repeated balloon dilatation was determined to be safe and effective for treating bronchial stenosis following LT. Early-stage treatment and prolonged balloon dilatation could significantly promote long-term patency.
Purpose: This study aimed at evaluating the therapeutic outcome, cost effectiveness and recurrence rate in children with H. pylori infection after the treatment using various medications. Methods: Seventy five children (mean age $11.4{\pm}2.5$ years) were given an endoscopy with biopsy and H. pylori status assessed by CLO test and histologic examination (Warthin Starry stain). Children were given one of following medications such as DA ($Denol^{(R)}$ and amoxycillin), OA (omeprazole and amoxycillin), DC ($Denol^{(R)}$ and clarithromycin) as primary treatment. And one of following medications such as DAM ($Denol^{(R)}$, amoxycillin and metronidazole), DC, OA, OC (omeprazole and clarithromycin) were used in children who failed the eradication of H. pylori. Results: The endoscopic diagnoses were: nodular gastritis (46 cases), gastric ulcer (9), duodenal ulcer (6), superficial gastritis (6), and normal (8). H. pylori eradication rate was 91% (63 of 69 children) on 4 weeks course of DA, 50% (1 of 2 cases who had treatment failure on DA) on DAM, and 75% (3 of 4 cases who treated on DC primarily) and 50% (1 of 2 cases who had treatment failure on DA) on DC, and 100% on OA (all of 2) and on OC (all of 1 who failed on DA). In 3 of 7 children in whom H. pylori had not been eradicated by primary medications (DA 6 and DC 1 case), H. pylori was re-eradicated by secondary medications (DA 1, DAM 1 and DC 1 case). But in remaining 4 cases, H. pylori infection persisted. Reinfection of H. pylori was found in 4 of 75 children between 3 months and 3 years after completion of the treatment of DA, yielding recurrence rate of 5.3%. In 2 of 4 cases who had relapsed, H. pylori was re-eradicated by secondary medications (OC 1 and DA 1 case). But in remaining 2 cases, H. pylori infection persisted. Conclusion: These results suggest that dual therapy with $Denol^{(R)}$ and amoxycillin is the effective medications in treating H. pylori infection in children. Concerning the cost effectiveness, it can be recommended as first line treatment of choice as well.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.