• Nuclear Medicine and Molecular Imaging
• /
• 제40권1호
• /
• pp.33-39
• /
• 2006

목적 : 다중 채혈 이중지수법을 이용한 사구체여과율의 계산에 정확도와 편리성을 고려한 적정 채혈 횟수 및 시간을 선정하고자 하였다. 대상 및 방법 :총 34명의 환자를 대상으로 하였다. $^{99m}Tc$-DTPA 3 mCi를 정맥주사 후, 총 9회, 각각 5 ml의 혈액을 채혈하였다. 혈장의 방사능을 감마카운터에서 측정하여 이중지수 분석법으로 사구체여과율을 계산하였고 체표 면적으로 보정하였다. 두 가지 시간대의 혈장 방사능을 이용한 15 조합의 2회 채혈 사구체여과율을 계산하였고 10 조합의 3회 채혈 사구체여과율과 12 조합의 4회 채혈 사구체여과율 또한 계산하였다. 계산된 각각의 사구체여과율들과 기준값인 9회 채혈 사구체여과율의 일치도는 Kendall $\tau$ 상관 계수, 그리고 기준값과의 평균차와 표준편차를 이용하여 분석하였다. 결과: 2회 채혈 사구체 여과율은 높은 상관관계를 보이더라도 신기능의 변화에 따라 과대 또는 과소 평가되는 오류가 발생하였다. 3회 채혈 사구체여과율 중, 10-120-240분의 3회 채혈 사구체여과율이 높은 상관관계를 보이며 신기능의 변화에도 오류의 발생이 매우 적었다. 4회 채혈 사구체여과율은 3회 채혈 사구체여과율과 비교하여 정확성이 우월하지는 않았다. 결론: 신기능의 변화에도 불구하고 오류의 발생이 적은 10-120-240분의 3회 채혈 사구체여과율을 이용하여 환자의 신기능을 가장 정확하게 평가할 수 있을 것이다.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.87-95
• /
• 2014

본 논문에서는 이중 채널 CIS(CMOS Image Sensor) 인터페이스를 위한 수신기 설계에 대해서 기술한다. 두 채널은 각각 CTLE(Continuous-Time Linear Equalizer)를 포함하며 샘플러, 병렬 변환기 그리고 clocking 회로로 구성되어 있다. Clocking 회로는 PLL, PI, CDR을 포함한다. CDR은 PI 기반이며 OSPD(Over Sampling Phase Detector)와 FSM(Finite State Machine)을 추가하여 빠른 락 소요 시간과 지연 시간, 향상된 jitter tolerance를 갖도록 하였다. CTLE는 3 GHz에서 -6 dB 손실을 갖는 채널의 ISI(Inter Symbol Interference)를 제거하며 CDR은 8000 ppm 이하의 주파수 오프셋에 대해 1 baud period 이내의 빠른 락 소요 시간을 갖는다. 65 nm CMOS 공정을 이용하여 설계하였으며 eye diagram에서 최소 368 mV의 전압 마진과 0.93 UI의 시간 마진을 갖는다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.417-425
• /
• 2023

The glomerular filtration rate (GFR) has been the subject of much research as a key indicator for diagnosing, treating, and monitoring kidney function. The gamma camera method (Gates method) is simple and allows simultaneous acquisition of GFR and renal scintigraphy for each kidney, however its accuracy is inferior. This study aimed to investigate changes in GFR depending on how region of interest (ROI) are set up, which is one of many factors influencing accuracy. GFR was calculated by setting the ROI for each phase of the image acquisition time (Gates-1: 0~1 minutes, Gates-2: 1~3 minutes, Gates-3: 3~27 minutes), and statistical significance was verified based on probability value 0.05 through ANOVA analysis. While there was no statistically significant difference among results from Gates-1, 2, 3 (p=0.481>0.05), overall results from the Gates method tended to overestimate compared to those from the multiple blood sampling-dual exponential (MBSDE) method. When comparing averages between phases, results from Gates-2 were most similar to those from the MBSDE method. Moreover, paired t-test p-values between MBSDE method and phases were as follows Gates-1: 0.021 (p<0.05), Gates-2: 0.280 (p>0.05), and Gates-3: 0.164 (p>0.05) indicating that only Gates-1 had statistically significant differences compared with MBSDE method. Thus, setting ROI around 2~3 minutes is calculated can aid in accurately determining GFR when Gates Method.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.649-654
• /
• 2019

가상 환경과의 안정적인 상호작용은 사용자의 안전을 위해서 뿐만 아니라 사용자의 몰입감 향상을 위해서도 반드시 필요하다. 특히 현실감 높은 가상 강체 모델을 구현하기 위해서는 가상 강체 모델인 가상 스프링 상수를 가능한 크게 설계해야 한다. 그러나 가상 스프링 상수를 크게 하면 시스템이 불안정해지므로, 가상 스프링 상수의 크기에는 제한이 있다. 단일샘플링 주기를 이용하는 기존 방법보다 가상 스프링의 안정성 영역을 크게 하기 위해서 제안된 방법이 고주파 영차홀드를 포함한 햅틱 시스템 모델이다. 본 논문에서는 고주파 영차홀드의 샘플링 주기, 햅틱 장치의 물리적 댐퍼 크기와 안정적인 가상 스프링 최댓값과의 관계를 시뮬레이션을 통해 분석한다. 물리적 댐퍼 크기가 커질수록, 고주파 영차홀드의 샘플링 주기가 짧아질수록 가상 스프링의 안정성 영역은 커진다. 그리고 제시된 방법에서 비율 N이 40보다 커지면 물리적 댐퍼크기에 따라 안정성 영역을 기존 방법보다 약 3배~8배 더 크게 만들 수 있다. 따라서 본 방법이 가상환경 속 사용자의 현실감 향상에 도움이 될 것이다.

• 한국통신학회논문지
• /
• 제27권2C호
• /
• pp.191-200
• /
• 2002

본 논문에서는 이중 루프 PLL을 이용한 IMT-2000용 주파수 합성기를 설계 및 제작하였다. 위상잡음 특성을 개선하기 위해서 기준 루프와 두 개의 루프로 나누고 기준루프에는 변형 클램프 형태의 전압제어 발진기와 루프 필터를 최적화 함으로서 위상잡음을 개선하고 메인 루프에는 동축형 유전체 공진기를 사용한 전압제어 발진기와 위상 검출기로 SPD(Sampling Phase Detector)를 사용함으로서 분주기의 사용을 없애고 개루프 이득을 크게 함으로서 위상잡음 특성을 개선하였다. 이렇게 제작된 주파수 합성기는 1.81GHz의 중심주파수에 가변범위는 158.5MHz이고 위상잡음은 100kHz offset에서 -120..66dB로 우수한 특성을 나타내었다.

• 한국자기공명학회논문지
• /
• 제24권2호
• /
• pp.53-58
• /
• 2020

Free radicals including reactive oxygen species (ROS) are important chemicals in the research area of biology, pharmaceutical, medical, and environmental science as well as human health risk assessment as they are highly involved in diverse metabolism and toxicity mechanisms through chemical reactions with various components of living bodies. Electron spin resonance (ESR) spectroscopy is a powerful tool for detecting and quantifying those radicals in biological environments. In this work we observed the ESR signal of 2,2,6,6-Tetra-methyl piperidine 1-oxyl (TEMPO) in aqueous solution at various concentrations to estimate the uncertainty factors arising from the experimental conditions and signal treatment methods. As the sample position highly influences the signal intensity, dual ESR tube geometry (consists of a detachable sample tube and a position fixed external tube) was adopted. This type of measurement geometry allowed to get the relative uncertainty of signal intensity lower than 1% when triple measurements are averaged. Linear dependence of signal intensity on the TEMPO concentration, which is required for the quantification of unknown sample, could be obtained over a concentration range of ~10³ by optimizing the signal treatment method depending on the concentration range.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.235-240
• /
• 2015

A decimation chain for multi-standard reconfigurable radios is presented for 900-MHz and 1,900-MHz dual-band cellular standards with a data interpolator based on the Lagrange method for adjusting the variable data rate to a fixed data rate appropriate for each standard. The two proposed configurations are analyzed and compared to provide insight into aliasing and the signal bandwidth by means of a newly introduced measure called interpolation error. The average interpolation error is reduced as the ratio of the sampling frequency to the signal BW is increased. The decimation chain and the multi-rate analog-to-digital converter are simulated to compute the interpolation error and the output signal-to-noise ratio. Further, a method to operate the above-mentioned chain under a compressed mode of operation is proposed in order to guarantee continuous packet connectivity for inter-radio-access technologies. The presented decimation chain can be applied to LTE, WCDMA, GSM multi-mode multi-band digital front-end which will ultimately lead to the software-defined radio.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.131-143
• /
• 2012

This paper introduces the double-density discrete wavelet transform using 3 direction separable processing method, which is a discrete wavelet transform that combines the double-density discrete wavelet transform and quincunx sampling method, each of which has its own characteristics and advantages. The double-density discrete wavelet transform is nearly shift-invariant. But there is room for improvement because not all of the wavelets are directional. That is, although the double-density DWT utilizes more wavelets, some lack a dominant spatial orientation, which prevents them from being able to isolate those directions. The dual-tree discrete wavelet transform has a more computationally efficient approach to shift invariance. Also, the dual-tree discrete wavelet transform gives much better directional selectivity when filtering multidimensional signals. But this transformation has more cost complexity Because it needs eight digital filters. Therefor, we need to hybrid transform which has the more directional selection and the lower cost complexity. A solution to this problem is a the double-density discrete wavelet transform using 3 direction separable processing method. The proposed wavelet transformation services good performance in image and video processing fields.

• International Journal of Costume and Fashion
• /
• 제14권1호
• /
• pp.1-15
• /
• 2014

Fashion leadership is divided into visual influence, linguistic influence, and dual leadership. We refer to people exercising such influential power as fashion innovators, fashion opinion leaders, and fashion double leaders, respectively. Scholars and marketers have raised continuous questions on this issue: who are these fashion leaders and what characteristics do they have? In this study, social network analysis is applied to grasp the existence of three types of fashion leaders in college clubs, examine their positions in fashion process networks and investigate their individual and social characteristics. For this study, three college clubs were recruited through convenience sampling and surveyed online. Peer nomination questions for structuring fashion process networks and self-evaluation questions for measuring personal characteristics are included. Two fashion networks, an opinion leadership network and an innovativeness network, embrace four to six leaders and illustrate similar structure patterns in the three groups, which indicates that dual leaders enjoyed the lion's share in college clubs. The number of fashion innovators tends to be fewer compared to that of fashion opinion leaders, and we infer that peer relationship appears to intervene with fashion opinion leadership. Other personal characteristics supporting results from previous studies are also confirmed in this study.

• 한국의류산업학회지
• /
• 제23권5호
• /
• pp.586-597
• /
• 2021

Personalized product recommendation service is receiving attention as a new marketing strategy while supporting consumer information search and purchasing decisions. This study attempted to verify the effect of self-reference on service use behavior through the dual path of cognitive attitude and emotional attachment. Using convenience sampling, an online survey was conducted with 324 women who were in their 20s and 30s. After collecting and compiling the survey data, the reliability and validity of variables constituting the conceptual research model were verified through confirmatory factor analysis using AMOS 22.0. Next, the significance of sequentially mediated pathways was verified using Process 3.5 Model 80. The results showed that self-referencing not only significantly affects service use intention by simply mediating cognitive attitudes but also sequentially mediates cognitive attitudes and additional information search. Furthermore, self-referencing was significant as an indirect path to service use intention by mediating additional information search. However, in the path mediated by emotional attachment, self-referencing was considered as a simple mediated path leading to service usage intention. These results indicate a dual path in the psychological mechanism, through cognitive and emotional evaluation, that prompts consumer behavioral responses to the personalized product information provided in the shopping process.