• Title/Summary/Keyword: dual ring

Search Result 152, Processing Time 0.021 seconds

A design of Dual-mode Folded Ring Resonator (이중모드 접힌 링-공진기를 이용한 BPF 설계)

  • Kang, Seong-Jun;Hwang, Hee-Yong
    • Journal of Industrial Technology
    • /
    • v.27 no.B
    • /
    • pp.145-151
    • /
    • 2007
  • In this paper, a BPF with a dual mode folded ring resonator is presented. The dual mode ring resonator is also exactly analyzed by using Y-parameter method, in which the difference in admittance of two lines make the ring resonator work as a dual mode resonator. The proposed BPF has an advantage of small size compared to conventional one with dual mode ring resonator.

  • PDF

Design and Fabrication of a Dual-Band Bandpass Filter Using a Dual-Mode Ring Resonator with Two Short-Circuited Stubs for WLAN Application (두 단락 스터브를 갖는 이중 모드 링 공진기를 이용한 WLAN용 이중대역 대역통과 여파기의 설계 및 제작)

  • Choi, Byung-Chang
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.9
    • /
    • pp.814-820
    • /
    • 2015
  • In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

The Research on Trench Etched Field Ring with Dual Ion-Implantation for Power Devices (이중 이온주입 공정을 이용한 트렌치 필드링 설계 최적화 및 전기적 특성에 관한 연구)

  • Yang, Sung-Min;Oh, Ju-Hyun;Bae, Young-Seok;Sung, Man-Young
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.23 no.5
    • /
    • pp.364-367
    • /
    • 2010
  • The dual ion-implantation trench edge termination techniques were investigated and optimized using a two-dimensional device simulator. By trenching the field ring site which would be dual implanted, a better blocking capability can be obtained. The results show that the p-n junction with dual implanted junction field-ring can accomplish nearly 20% increase of breakdown voltage in comparison with the conventional trench field-rings. The fabrication is relatively difficult. But the trench etched field ring with dual ion-implantation is surpassed for breakdown voltage and consume same area and extensive device simulations as well as qualitative analysis confirm these conclusions.

Analysis of System Performance of Change the Ring Architecture on Dual Ring CC-NUMA System (이중 링 CC-NUMA 시스템에서 링 구조 변화에 따른 시스템 성능 분석)

  • Yun, Joo-Beom;Jhang, Seong-Tae;Jhon, Shik-Jhon
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.29 no.2
    • /
    • pp.105-115
    • /
    • 2002
  • Since NUMA architecture has to access remote memory an interconnection network determines the performance of CC-NUMA system Bus which has been used as a popular interconnection network has many limits to build a large-scale system because of the limited physical scalabilty and bandwidth Dual ring interconnection network composed of high speed point-to-point links is made up for resolving the defects of the bus for large-scale system But it also has a problem that the response latency is rapidly increased when many node are attached to snooping based CC-NUMA system with dual ring In this paper we propose a chordal ring architecture in order to overcome the problem of the dual ring on snooping based CC-NUMA system and design and efficient link controller adopted to this architecture. We also analyze the effects of chordal ring architecture on the system performance and the response latency by using probability driven simulator.

Dual-Band Circularly Polarized Stack-Ring Antenna

  • Sung, Youngje
    • Journal of electromagnetic engineering and science
    • /
    • v.19 no.1
    • /
    • pp.37-41
    • /
    • 2019
  • A stack-ring configuration is proposed for designing a dual-band circularly polarized (CP) antenna. Each ring generates different resonant frequencies. A good CP performance at both resonant frequencies is achieved by adjusting the relative distance between the two rings. The two operating bands are separated with a small frequency ratio of 1.07. Measured results show that radiation patterns with good CP characteristics are obtained at the two resonant frequencies.

ON THE CONSTRUCTION OF MDS SELF-DUAL CODES OVER GALOIS RINGS

  • HAN, SUNGHYU
    • Journal of Applied and Pure Mathematics
    • /
    • v.4 no.3_4
    • /
    • pp.211-219
    • /
    • 2022
  • We study MDS(maximum distance separable) self-dual codes over Galois ring R = GR(2m, r). We prove that there exists an MDS self-dual code over R of length n if (n - 1) divides (2r - 1), and 2m divides n. We also provide the current state of the problem for the existence of MDS self-dual codes over Galois rings.

The Dual-Mode Ring-Resonator Bandpass Filter Using Artificial-Transmission-Lines (인공전송선로를 이용한 이중모드 링-공진기 대역통과 여파기)

  • Sim, Kyung-sub;Hwang, Hee-yong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.5
    • /
    • pp.424-429
    • /
    • 2016
  • This paper presents dual-mode ring-resonator bandpass filter using LUC of artificial-transmission-lines. The conventional ring-resonator bandpass filter has limitation in miniaturization because the conventional ring-resonator is based on a one wavelength operation, and problem due to undesire harmonics. The ring-resonator bandpass filter is miniaturized and show higher order mode rejection by configuring a ring-resonator with LUC of artificial-transmission-lines. The two-stage bandpass filter is designed and fabricated with a ring-resonator and input/output interdigital coupled line. A fabricated filter shows dual-mode, rejection of whole ultra wide band, sharp skirt characteristics and has ring area reduced by 60 % compared to the conventional ring-resonator bandpass filter.

A Fault Detection and Self-Recovery System for Space-Borne Dual Ring Counters (우주용 중복구조 링 카운터를 위한 고장 진단 및 자가 복구 시스템)

  • Kwak, Seong Woo;Yang, Jung-Min
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.62 no.1
    • /
    • pp.120-126
    • /
    • 2013
  • This paper proposes a novel scheme of fault detection and self-recovery for space-borne dual ring counters subject to transient faults. The considered ring counter is equipped with hardware redundancy, but it has a limited output domain where direct access to the current state is unavailable. We employ the theory of corrective control to detect any transient fault occurring to the counter bits and to realize immediate self-recovery of the ring counter back to the normal state. The structure of the fault-tolerant controller is designed to be minimal regardless of the counter size. To validate the applicability, we implement the proposed system on a commercial FGPA board.

Design of a Dual-mode Annular Ring Antenna with a Coupling Feed (커플링 급전을 이용한 이중 모드 Annular Ring 안테나 설계)

  • Kim, Jae-Hee;Woo, Dae-Woong;Park, Wee-Sang
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.4
    • /
    • pp.351-356
    • /
    • 2009
  • A dual-mode annular ring antenna for both global positioning system(GPS) and satellite digital multimedia broad-casting(DMB) is designed. The proposed antenna consists of a coupling feed line and four slots on the annular ring patch. The gap between the feed line and the annular ring patch is used for an input impedance matching, and the slot length is used for adjusting the resonant frequency of the $TM_{21}$ mode at the DMB frequency. The antenna was fabricated and measured. The experimental results show that the antenna resonants at the GPS and DMB frequencies with suitable bandwidths, and had a broadside radiation pattern at the GPS band and a conical beam radiation pattern at the DMB band.