• 제목/요약/키워드: dual filter

검색결과 376건 처리시간 0.027초

분산 CRLH 전송선로 4중 모드 공진기를 이용한 이중-광대역 대역통과 여파기 설계 (Dual-Wideband Bandpass Filter Using Distributed Composite Right/Left-Handed Transmission Line Quad-Mode Resonators)

  • 성규제;김영
    • 한국항행학회논문지
    • /
    • 제21권1호
    • /
    • pp.84-89
    • /
    • 2017
  • 본 논문은 CRLH (composite right/left handed) 전송선로 구조의 4중 모드 공진기를 이용하여 높은 대역간 격리도를 갖는 이중-광대역 대역통과 여파기를 설계하는 방법을 제안한다. CRLH 전송선로 구조를 해석하여 4중 모드 공진기의 s-패러미터와 공진 주파수를 유도하였다. 유도된 s-패러미터를 이용하여 새로운 구조의 이중-광대역 대역통과 여파기를 설계, 제작하였다. 측정 결과는 2.8-5.52 GHz, 9.68-12.26 GHz의 이중 통과대역에서 각각 1.08 dB, 2.01 dB의 삽입손실을 갖고, 6.34-8.42 GHz의 중간대역에서 38dB의 대역 격리도를 가져 설계 결과와 잘 일치하는 특성을 보여 주었다.

A Dual-Band Through-the-Wall Imaging Radar Receiver Using a Reconfigurable High-Pass Filter

  • Kim, Duksoo;Kim, Byungjoon;Nam, Sangwook
    • Journal of electromagnetic engineering and science
    • /
    • 제16권3호
    • /
    • pp.164-168
    • /
    • 2016
  • A dual-band through-the-wall imaging radar receiver for a frequency-modulated continuous-wave radar system was designed and fabricated. The operating frequency bands of the receiver are S-band (2-4 GHz) and X-band (8-12 GHz). If the target is behind a wall, wall-reflected waves are rejected by a reconfigurable $G_m-C$ high-pass filter. The filter is designed using a high-order admittance synthesis method, and consists of transconductor circuits and capacitors. The cutoff frequency of the filter can be tuned by changing the reference current. The receiver system is fabricated on a printed circuit board using commercial devices. Measurements show 44.3 dB gain and 3.7 dB noise figure for the S-band input, and 58 dB gain and 3.02 dB noise figure for the X-band input. The cutoff frequency of the filter can be tuned from 0.7 MHz to 2.4 MHz.

여재 종류에 따른 역삼투법 해수담수화 시설 전처리 여과공정의 성능비교 (Comparison of the filtration performance by different media in pretreatment of seawater desalination by reverse osmosis)

  • 김승현;윤종섭;이석헌
    • 상하수도학회지
    • /
    • 제23권2호
    • /
    • pp.215-222
    • /
    • 2009
  • This study compares the performance of the filters with various media in pretreatment of seawater desalination by reverse osmosis. For this purpose, Masan bay seawater is used as raw water. The filter performance is evaluated by the filtrate quality and the head loss development. Five media is selected in this study: anthracite, $Filtralite^{(R)}$, sand, Pumice, $AFM^{(R)}$. These media are used in combination for dual media filter and alone for mono media filter. The comparison results show that NC0.8-1.6 is the best $Filtralite^{(R)}$. The dual media filter of NC0.8-1.6 and sand outperformed other filters in particle removal. The dual media filter of anthracite and sand showed good performance in organic removal. The mono media filter of Pumice produced the similar filtrate quality as the mono media filter of sand although the effective size of Pumice is considerably greater than that of sand. Due to big size, head loss development is maintained slow in the filtration of Pumice.

Design of Dual-Mode Digital Down Converter for WCDMA and cdma2000

  • Kim, Mi-Yeon;Lee, Seung-Jun
    • ETRI Journal
    • /
    • 제26권6호
    • /
    • pp.555-559
    • /
    • 2004
  • We propose an efficient digital IF down converter architecture for dual-mode WCDMA/cdma2000 based on the concept of software defined radio. Multi-rate digital filters and fractional frequency conversion techniques are adopted to implement the front end of a dual-mode receiver for WCDMA and cdma2000. A sub-sampled digital IF stage was proposed to support both WCDMA and cdma2000 while lowering the sampling frequency. Use of a CIC filter and ISOP filter combined with proper arrangement of multi-rate filters and common filter blocks resulted in optimized hardware implementation of the front end block in 292k logic gates.

Design of a Dual-Band Bandpass Filter Using an Open-Loop Resonator

  • Im, Hyun-Seo;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제17권4호
    • /
    • pp.197-201
    • /
    • 2017
  • In this paper, we present a novel design for a dual-band bandpass filter (BPF) based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands) is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.

이중서보제어루프와 디지털 필터를 통한 서보모터-업전구동기의 초정밀위치결정 시스템 개발 (Ultra Precision Positining System for Servo Motor-piezo Actuator Using the Dual Servo Loop and Digital Filter Implementation)

  • 이동성;박종호;박희재
    • 한국정밀공학회지
    • /
    • 제16권3호통권96호
    • /
    • pp.154-163
    • /
    • 1999
  • In this paper, an ultra precision positioning system has been developed using dual servo loop control. For positioning system having long distance with ultra precision , the combination of global stage and micro stage was required. A servo motor based ball screw is used as a global stage and the piezo actuator as a micro stage. For the improvement of positional precision, the digital Chebyshev filter is implemented in the developed to dual servo system. Therefore, the positional repeatability has been achieved within ${\pm}$ 10 mm, and this technique can be applied to develop precision semiconductor equipments such as lithography steppers and probers.

  • PDF

마이크로 머시닝 기술을 이용한 새로운 구조의 100 GHz DMR bandpass Filter의 설계 및 제작 (Novel 100 GHz Dual-Mode Stepped Impedance Resonator BPF Using micromachining Technology)

  • 백태종;이상진;한민;임병옥;윤진섭;이진구
    • 대한전자공학회논문지SD
    • /
    • 제44권12호
    • /
    • pp.7-11
    • /
    • 2007
  • 본 논문에서는 MMIC 응용을 위한 dielectric-supported air-gapped microstrip line (DAML) 구조를 이용하여 dual-mode stepped impedance 링 공진기를 설계 제작하였다. 링 공진기는 표면 마이크로머시닝 기술을 이용하여 만들어졌다. DAML ring resonator는 다층구조로써 공기중에 위치한 신호선과 MMIC 응용에 적합하도록 CPW가 한 평면에 구성되 있으며 DAML-CPW 트랜지션이 자유로운게 특징이다. DAML 링 공진기는 $10{\mu}m$ 높이로 GaAs 기판 으로부터 띄어져 있다. 대역통과 여파기는 dual-mode 공진을 하며 stepped impedance 이용한 구조이다. 측정결과로 중심주파수 97 GHz에선 감쇠특성은 15 dB, 삽입손실은 2.65 dB를 보였으며, 상대 대역폭은 12 %를 나타냈다. 이같은 구조의 대역통과 여파기는 MMIC 와의 직접화에 유리하다.

심층여과지의 여층구성에 따른 여과특성 비교 (Characteristics of Depth Filtration for Various Filter-Bed Configurations)

  • 안종호;윤재흥
    • 한국수자원학회논문집
    • /
    • 제34권5호
    • /
    • pp.459-472
    • /
    • 2001
  • 모형실험장치를 이용하여 심층여과지에 대한 여층구성별 여과효율 평가를 통해 여과지 설계시의 여층구성에 대한 기초자료를 제공하는 것이 본 연구의 목적이다. 여과지속시간에 따른 손실수두 발달특성을 보면 여과초기의 수두손실은 이중여재 여과지가 높지만 탁질 억류에 의한 수두손실의 증가는 완만하여 여과속도 180 m/day의 동일한 여과속도를 적용하였을 경우, 조림심층 모래여과지에 비해 단위정수생산량이 30-40% 정도 증대되는 것으로 나타났다. 여과수질은 각각 여과속도 180 m/day, 240 m/day로 운전한 결과 여과속도에 관계없이 모두 0.1 NTU 이하를 나타내어 만족하는 여과수질을 보였다. 그러나 여과초기 탁질 누출 특성을 보면 상대적으로 조립심층 모래여과지의 누출 경향이 크게 나타났고, 여과속도 240 m/day로 증대됨에 따라 그 경향은 보다 뚜렷하게 나타났다.

  • PDF

인공전송선로를 이용한 이중모드 링-공진기 대역통과 여파기 (The Dual-Mode Ring-Resonator Bandpass Filter Using Artificial-Transmission-Lines)

  • 심경섭;황희용
    • 한국전자파학회논문지
    • /
    • 제27권5호
    • /
    • pp.424-429
    • /
    • 2016
  • 본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

P형 계단형 임피던스 공진기를 이용한 소형화된 마이크로스트립 이중 대역 저지 필터 (MINIATURIZED MICROSTRIP DUAL BAND-STOP FILTER USING STEPPED IMPEDANCE RESONATORS)

  • 박영배;김기래
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.43-46
    • /
    • 2011
  • A novel circuit structure of dual-band bandstop filters is proposed in this paper. This structure comprises two shunt-connected tri-section stepped impedance resonators with a transmission line in between. Theoretical analysis from the equivalent circuit and design procedures are described. We represented graphs for filter design from the derived synthesis equations by resonance condition of circuits. Notably, advantages of the proposed filter structure are compact size in design, wide range of realizable resonance frequency ratio, and more realizable impedances.

  • PDF