• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Preventive Nutrition and Food Science
• /
• 제20권2호
• /
• pp.143-147
• /
• 2015

Systematic study of how different drying methods, namely hot-air drying, vacuum-drying, and freeze-drying, affect color, browning index, degree of rehydration, water solubility, and vitamin C content is critical for utilizing pine needle powders (PNP) as a novel ingredient in functional foods. Samples prepared by vacuum-drying showed a significantly higher $L^*$-value, whereas higher $a^*$- and $b^*$-values were detected in the hot-air dried samples (P<0.05). The browning index was significantly higher in samples prepared by vacuum-drying compared to samples prepared by freeze-drying (P<0.05). Freeze-dried PNP exhibited a significantly higher degree of rehydration than hot-air dried samples (P<0.05). Water solubilities of freeze-dried and hot-air dried samples were significantly higher than that of vacuum-dried sample (P<0.05). Vitamin C was less destroyed during freeze-drying compared to hot-air or vacuum-drying (P<0.05). Freeze-dried samples displayed a clear porous structure and appeared to have a bigger space, whereas hot-air dried samples showed lower porosity than vacuum and freeze-dried samples.

• Current Research on Agriculture and Life Sciences
• /
• 제33권2호
• /
• pp.65-68
• /
• 2015

Hunter's color value "a" in dried-persimmon of table and full ripe fruit was higher than that in unripe fruit. In case of soluble solid content, full ripe fruit was $50^{\circ}Brix$, the highest degree, while unripe fruit was $40^{\circ}Brix$, the lowest degree. PPO activation of unripe fruit was 4.7, which was higher than table-ripe fruit (0.7) and full ripe (1.0). Polyphenol oxidase activation remained even while drying, but there was no difference in PPO activation degree as drying period increased. Total phenol content of unripe fruit was 101.4, which was higher than table-ripe fruit (57.5) and full ripe fruit (67.4). Total phenol content level increased as drying period increased, which was based on fresh weight. Hardness of unripe and table ripe fruit continued to decrease until three weeks during softening. After that, hardness was high and it started drying. However, in full ripe fruit, hardness increased after two weeks and softening was fast during the drying period, and its weight reduction rate was lower than that of unripe and table ripe fruit.

• 한국식품저장유통학회지
• /
• 제11권2호
• /
• pp.189-194
• /
• 2004

다양한 건조방범과 감의 성숙도에 따른 반건시의 품질을 알아보기 위해 자연건조, 열풍건조, 원적외선 건조, 제습식건조 방법과 미숙, 적숙, 과숙과를 구분하여 반건시를 제조하였다. 자연건조의 경우 건조 기간 중 과습때문에 건조대에서 떨어지거나 미생물에 의한 오염으로 발생한 손실율이 7.0%이었으나, 열풍건조 등 인공건조를 하였을때는 손실율이 0.0%였다. 건조소요일은 자연건조 17∼18일, 원적외선건조 6∼7일, 열풍과 제습식 건조 7∼8일 소요되어 자연건조에 비해 11∼12일 정도 건조일수를 단축시킬 수 있었다. 반건시 과육부의 수분함량이 전체의 수분함량 변화에 비해 다소 완만하게 진행되었고 건조완료 시점에서 자연건조와 제습식 건조구의 수분함량이 비슷하였다. 건조가 완료될 때까지 반건시의 표피부 경도는 제습식 건조 130.3, 자연건조 107.1g/$\textrm{cm}^2$로 가장 낮았으며 조직감과 저작감이 우수하였다. 반건시의 전체 기호도에서는 제습식 건조 3.9, 자연건조 3.4 로 가장 우수하였다. 감의 숙도별 반건시 품질 비교 실험에서는 숙도에 관계없이 제습식 건조를 통해서 7∼8일 정도 소요되었고, 전체수분함량은 미숙과가 가장 낮았다. 미숙과의 표피부와 과심부 경도가 가장 높았고, 적숙과와 과숙과의 색도가 미숙과에 비해 우수하였으며 기호도 조사에 있어서도 미숙과에 비해 적숙과와 과숙과의기호도가 우수하였다. 고품질 반건시 생산으로 지역 특산물의 이미지를 계속유지하기 위해서는 적어도 과정부가 적황색이고 과기부가 녹황색인 적숙과 이상을 사용해야 한다.

• 자원리싸이클링
• /
• 제27권1호
• /
• pp.92-105
• /
• 2018

본 연구는 여러 수경성 무기재료를 사용한 배합의 고정수량 측정을 위해 적절히 사용할 수 있는 건조방법을 찾기 위해 수행되었으며, 본 제1보에서는 보통 포틀랜드 시멘트의 경우에 대해 다루었다. 다양한 w/c를 갖는 시멘트 페이스트 및 모르타르에 대해 진공건조 및 오븐건조, 이 둘의 조합 그리고 작열법이 사용되었다. 실험결과, 상대적으로 상온 진공건조 만으로는 신뢰도가 낮은 수화도 결과를 얻을 수 밖에 없으며, 오븐건조 만을 사용하면 1일 전후의 극초기 재령에 고온에서 수화촉진이 발생해 실제보다 더 큰 수화도 결과값을 얻게 되는 문제가 있음을 확인 하였다. 따라서 진공건조 후 오븐건조를 사용하는 것이 보통 포틀랜드 시멘트를 위해 바람직한 수화도 측정방법일 수 있음을 확인하였다.

• 한국지반공학회논문집
• /
• 제32권7호
• /
• pp.15-24
• /
• 2016

보은 화강암 풍화토에 대한 불포화 특성을 조사하기 위하여 자동 흙-함수특성곡선 시험장치를 이용하여 건조 및 습윤과정에 따른 모관흡수력과 체적함수비를 측정하였다. 이를 토대로 van Genuchten(1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 산정한 결과 유효포화도에 따른 모관흡수력은 S자형의 비선형적인 관계를 나타내며, 건조 및 습윤과정을 거치는 동안 이력현상이 발생되었다. Lu and Likos(2006)의 방법을 이용하여 흡입응력특성곡선(SSCC)을 산정한 결과 유효포화도가 낮은 경우 건조과정의 흡입응력은 일정하게 유지되나 습윤과정의 흡입응력은 증가하는 경향을 보인다. 그러나 유효포화도가 큰 경우에는 동일한 유효포화도에서 건조과정의 흡입응력이 습윤과정의 흡입응력보다 크게 발생되었다. 한편 계수추정방법의 하나인 van Genuchten(1980)의 방법을 이용하여 투수계수함수(HCF)를 산정한 결과 모관흡수력이 증가함에 따라 불포화 투수계수는 감소하며, 모관흡수력에 따른 불포화 투수계수의 감소 속도는 건조과정이 습윤과정보다 더 크게 발생됨을 알 수 있다.

• 한국축산식품학회지
• /
• 제35권5호
• /
• pp.597-603
• /
• 2015

The purpose of this study was to investigate the influence of processing conditions (temperature and time) and binding agent types (glutinous rice flour, potato starch, bean flour, and acorn flour) on the physicochemical and sensory characteristics of ground dried-pork meat product. For this purpose, ground dried-pork meat product was produced by adding several binding agents at different drying temperatures and times. The drying time affected moisture content and water activity in all drying temperature. However, under the similar drying conditions, the extent of drying varied depending on the type of binding agents. The results of sensory evaluation for texture degree and overall acceptability indicated the following: overall, higher drying temperatures and longer drying time heightened the degree of texture, and the overall acceptability varied depending on binding agent type. Physicochemical and sensory characteristics were analyzed to determine any possible correlation. The results revealed a high correlation between moisture content, water activity, shear forces, and sensory evaluation (p<0.01). However, there was no correlation with respect to overall acceptability.

• 치위생과학회지
• /
• 제22권1호
• /
• pp.51-56
• /
• 2022

Background: The coronavirus disease (COVID-19) pandemic increased awareness regarding the importance of hand hygiene in infection prevention. Although social distancing and vaccination are the strongest ways to prevent infection, personal hand hygiene is the most basic and easiest way to maintain public health. However, in addition to hand washing using running water, sanitizing tissues, and disinfection products are convenient for hand hygiene, especially outdoors. Therefore, it is necessary to improve the appropriateness of individual hand hygiene methods. In this study, we investigated the degree of hand hygiene offered by various hygiene products and hand drying methods for maintaining hand hygiene. Methods: An LED UV light kit was used for fluorescent observation of hand contamination. Bacteria from the hands were cultured to compare the degree of hand hygiene offered by various hygiene products. Bacteria were cultured in a hand-shaped medium dish to identify areas vulnerable to hand hygiene. Moreover, the degree of hand hygiene was observed according to the drying method using bacterial cultures. Results: We confirmed that hand washing under running water with antibacterial soap, sanitizing with alcohol gel disinfectant, and wiping with antibacterial wet wipes was effective for hand hygiene compared to washing under running water alone. However, for all hygiene products, a large number of bacteria were detected on the fingertips. We verified that natural drying, rather than rubbing, is effective in maintaining hand hygiene. Conclusion: These results suggest that hand hygiene products and drying methods are critical in hand hygiene management. Therefore, these results provide a basis for determining whether an individual's hand hygiene management method is appropriate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.132-137
• /
• 1993

In this paper, a fish drying process control system is proposed, which predicts the proper change with time in weight of the material fish and the drying conditions in advance, based on the performance of skilled worker. In order to implement a human expertise into an automated fish drying process control system, an experimental analysis is made and a model for the process is built. The proposed system divided into two procedures: The procedure before drying and the one during drying. The procedure before drying is for the prediction of necessary drying time. To estimate the necessary drying time, first, the proper change in weight for the product is obtained by using fuzzy reasoning. The condition part of the production rule consists of the factors of fish body and the expected degree of dryness. Kext, the necessary drying time is obtained by regression models. The variables employed in the models are the factors, inferred change in weight and drying conditions. The model for the procedure during drying is also proposed for more accurate estimation, which is described by a system of linear-differential equations.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.1-8
• /
• 2006

To overcome troubles in strength and process of linerboard caused by raw materials, a neutral sizing which is usual in fine paper making can be considered. A new sizing agent is necessary to show good performance in a system with high conductivity and COD. In this study, fast cure type AKD was examined as a new sizing agent and compared with conventional AKD. The effects of fixing agent addition and drying condition were also investigated. Fast cure type AKD which has a higher cationicity showed better sizing degree than conventional AKD in spite of low addition level and no curing treatment. And when fixing agent of sufficient amount was added, sizing degree was improved for both AKDs. High cationicity is a crucial factor for neutral sizing of linerboard for obtaining fast and stable sizing degree. Drying with temperature over $100^{\circ}$ was desirable for developing sizing degree.