• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.26-40
• /
• 1990

The plane trees(Platanus occidentalis L.) have been grown in Korea very widely as ornamental garden or street trees but they have not been used as manufacturing materials The proportion of imported wood has been now over 85% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. From a this point of view, this study was carried out to investigate solid wood bending properties of plane trees and then to develop their end-uses, and the size of specimens tested was $15\times15\times350mm$ for steaming treatment and they were dried to $15\pm1%$ before bending. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Platanus occidentalis are showed in Table 7. 2. The minimum solid-bending radii of Platanus occidentalis were 40mm in steaming treatment. 3. The effect of knots, diagonal grain and decay on the degradation of bending processing properties were very severe. 4. The bending stress was setted successfully through $80^{\circ}C$-15hrs drying after bending and the spring back for 24hr-exposing time was only about 1%.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.197-204
• /
• 2004

Now many sustitution and false articles is used in korea instead of chenpi. To use chenpi correctly, we will make a quilitative certificational plan of chenpi to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source In china source of Chen-pi is pericarp of citrus reticula Blanco(Family;rutaceae)and in korea source of Chen-pi is pericarp of citrus unshiu Markovich(Family;rutaceae). Though source of both countries are not same, it has no problems because of containing family plants and culture variants. 2) Harvesting and processing After the peel attained full growth, wash cleanly in water. And dry in shade or in low temporature at state of eliminating pericarp. 3) Quality (1) Functional standards Exocarp is soft and clear yellow with numerous oil sports. The less white mesocarp is the better. (2) Physicochemical standards We need to suggest new standards about hesperidin to various conditions by processing methods and storing time. The loss on drying is less than 13.5%. Ash content is less than 4.0%. A standard capacity of hesperidin is more than 4.0%. The content of heavy metal is less than 30 ppm. We can not detect reminding agricultural medicines.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.103-111
• /
• 1979

For the effective utilization of the coastal fish resources in Korea, an investigation on the optimum processing conditions and the quality of a textured fish protein concentrate similar to the texture of animal meat has been carried out with the fish meat of Alaska pollack and mackerel. A noodle shaped product was prepared with the fish meat paste after the adjustment of pH and salt content. The product was soaked in $96\%$ ethyl alcohol to produce textured fish protein concentrate and then dried. The processing conditions were estimated with the rehydration capacity of the textured fish protein concentrate(FFC). The quality of the final product was evaluated with chemical composition, sensory test and texture measurement. The optimum pH and salt content of the fish meat for the processing of meaty textured FPC were 7.5 and $1.0\%$ respectively. The most effective soaking conditions were as follows:soaking time, 40 min. ; temperature of alcohol, 5 to $20^{\circ}C$;amount of alcohol, 4 times the weight of tile fish meat paste, number of soaking in alcohol, 4 times. The alcohol remaining in meaty textured FPC could be removed effectively by forced air drying. The yield and the contents of protein and lipid in the meaty textured FPC from Alaska pollack were $19.9\%\;84.3\%\;and\;0.5\%$ and those from mackerel were $29.8\%,\;78.1\%\;and\;3.6\%$ respectively. The content of essential amino acid in the meaty textured FPC from Alaska pollack and mackerel was not inferior to that of beef, textured soybean protein and FAO pattern. Beef meat can be substituted with the meaty textured FPC up to $50\%$ in processing meat balls withoutanysignificantlossinthetaste, ordor and texture.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.223-228
• /
• 2023

Sustainable energy supplies without the recharging and replacement of the charge storage device have become increasingly important. Among various energy harvesters, the triboelectric nanogenerator (TENG) has attracted considerable attention due to its high instantaneous output power, broad selection of available materials, eco-friendly and inexpensive fabrication process, and various working modes customized for target applications. In this study, the amount of voltage and current generated was measured by applying the PSD profile random vibration test of the electronic vibration tester and ISTA 3A according to the time of Anodized Aluminum Oxide (AAO) pore widening of the manufactured TENG device Teflon and AAO. The discharge and charging tests of the integrated module during the random simulated transport environment and the recognition distance of RFID were measured while agricultural products (onion) were loaded into the returnable folding plastic box. As a result, it was found that AAO alumina etching processing time to maximize TENG performance was optimal at 31 min in terms of voltage and current generation, and the integrated module applied with the TENG module showed a charging effect even during the continuous use of RFID, so the voltage was kept constant without discharge. In addition, the RFID recognition distance of the integrated module was measured as a maximum of 1.4 m. Therefore, it was found that the surface condition of AAO, a TENG element, has a great influence on the power generation of the integrated module, and due to the characteristics of TENG, the power generation increases as the surface dries, so it is judged that the power generation can be increased if the surface drying treatment (ozone treatment, etc.) of AAO is applied in the future.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.4
• /
• pp.27-39
• /
• 2024

Soil texture is determined by the proportions of sand, silt, and clay within the soil, which influence characteristics such as porosity, water retention capacity, electrical conductivity (EC), and pH. Traditional classification of soil texture requires significant sample preparation including oven drying to remove organic matter and moisture, a process that is both time-consuming and costly. This study aims to explore an alternative method by developing an AI model capable of predicting soil texture from images of pre-sorted soil samples using computer vision and deep learning technologies. Soil samples collected from agricultural fields were pre-processed using sieve analysis and the images of each sample were acquired in a controlled studio environment using a smartphone camera. Color distribution ratios based on RGB values of the images were analyzed using the OpenCV library in Python. A convolutional neural network (CNN) model, built on PyTorch, was enhanced using Digital Image Processing (DIP) techniques and then trained across nine distinct conditions to evaluate its robustness and accuracy. The model has achieved an accuracy of over 80% in classifying the images of pre-sorted soil samples, as validated by the components of the confusion matrix and measurements of the F1 score, demonstrating its potential to replace traditional experimental methods for soil texture classification. By utilizing an easily accessible tool, significant time and cost savings can be expected compared to traditional methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.55-61
• /
• 2002

Ultra-fine particles of $SnO_{2}$ was synthersized by the sol-gel powder processing using tin(II) chloride dihydrate$(SnCl_{2}{\cdot}2H_{2}O)$ and ethanol$(C_{2}H_{5}OH)$ as raw materials. Gel powders can be obtained by drying of sol at $120^{\circ}C$ after aging 72hrs and 168hrs. The amount of $SnO_{2}$ phase was increased with temperature because of the evaporation of volatile components, and the creation of $SnO_{2}$ phase was almost done by the heat treatment at $700^{\circ}C/30min$ The grain sizes after firing are about 20-30nm, and it showed the narrow distribution of grain size. The specimens to measure electrical properties were fabricated by the thick film screen printing technique on the alumina substrates. The conductance of $SnO_{2}$ was increased with temperature up to $380^{\circ}C$ by the typical conduction mechanism of semiconducting ceramics. There was a region of constant conductance between about $200^{\circ}C$ and $380^{\circ}C$ due to the increment of electron concentration with temperature and the annihilation of conduction carriers by the absorption and electron trapped-ionization of oxygen on the surface of $SnO_{2}$, It was finally showed the intrinsic behaviors above $450^{\circ}C$. The sensing properties of response time, recovery, and sensitivity of CO were improved with aging time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1249-1256
• /
• 2016

Black ginseng (BG) obtained by a 9-fold steaming process of Panax ginseng has been reported to have anti-oxidative, anti-obesity, and anti-diabetes effects. The current study evaluated the protective effect of BG by steaming time in an HCl/ethanol-induced acute gastritis model. BG was divided into four samples according to steaming-drying processing (Gin1, Gin3, Gin6, and BG). High performance liquid chromatography analysis, free radical scavenging activity, and total phenol and flavonoid contents were examined in ginseng and four BG samples. Compared with ginseng, BG showed a stronger radical scavenging effect and higher contents of total phenol and flavonoids. To evaluate the anti-gastritic effect of BG, mice were distributed into five groups: normal mice (N), acute gastritic mice with distilled water (CON), acute gastritic mice with 100 mg/kg of ginseng (Gin0), acute gastritic mice with 100 mg/kg of BG (BG), and acute gastritic mice with 10 mg/kg of sucralfate (SC). After 1 hour of pre-treatment with water, extracts (Gin0 and BG), or drug (SC), experimental groups except for N were orally administered 0.5 mL of 150 mM HCl/60% ethanol (v/v) mixture. Blood was collected 1 hour later from the heart, and gastric tissue was harvested. Reactive oxygen species (ROS) levels were measured in serum, and related protein expression was examined by Western blot assay. In HCl/ethanol-induced acute gastritic mice, treatment with ginseng or BG improved mucosal damage in the histological evaluation. The serum ROS level significantly decreased in the BG-treated group compared with the CON group. Furthermore, expression of inflammatory cytokines significantly decreased in the BG-treated group compared with the CON group. Based on these results, antioxidant and anti-gastritic activities of ginseng were enhanced by streaming-drying processing, in part due to an increase in biological active compounds.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.640-645
• /
• 1995

Job's-tears(Coix lachryma-jobi L. var. Ma-yuen Stapf) seeds were processed to flakes by soaking, heat treatment, intermediate-moisture drying, flaking, drying, and cooking. Some functional properties of job's-tears flakes subjected to varing degree of heating were characterized by specific volume, texture, water absorption index(WAI), water solubility index(WSI), and viscosity. As degree of gelitinization increased within the intermediate range of $60{\sim}70%$, steam-cooked Job's-tears demonstrated appropriate rheological properties for further processes, resulting in increased specific volume and decreased breaking strength. However, excessive heat treatment rendered Job's-tears undesirably sticky for flaking, which caused adverse effects on the functional properties of flakes such as specific volume and breaking strength. Increasing steaming time$(5{\sim}30\;min)$ caused an increase in WAI and WSI values. Apparent viscosity of powdered flakes was increased with the extent of gelitinization as a function of heat processing. Viscosity of powdered flakes determined using the amylograph increased with the degree of heating applied to Job's-tears at low pasting temperatures, accompanied by a decrease in maximum viscosity as the pasting temperature increased.

• Korean Journal of Agricultural Science
• /
• v.6 no.2
• /
• pp.198-204
• /
• 1979

In order to obtain the basic data for processing adaptability of hazelnut, physico-chemical properties and heat stability of hazelnut oil were invest igated, and the results obtained are summarized as follows. 1. Hazelnut showed highly nutrient value as the content of oil and protein were 59.6% and 17.35, respectively. 2. In physicochemical properties of hazelnut oil, refractive index was 1.469, specific gravity 0.912, saponification value 167.3 and iodine value 63.43, therefore, it was found to be non-drying oil. 3. In composition of fatty acids in hazelnut oil, oleic acid was contained much in comparisoon with other fatty acids, and which was similar to olive oil. 4. 18 kinds of amino acids were existence in protein of hazelnut cake and among these the content of glutamic acid was the highest. 5. The peroxide value were the highest in the heat ing at $150^{\circ}C$ for 30 hours and at $180^{\circ}C$ for 10 hours, and then decreased as the heating time were longer. The carbonyl value was increased as heating time passed. 6. Acid value of hazelnut oil in the heating at $150^{\circ}C$ for 30 hours and at $180^{\circ}C$ for 10 hours were similar to each other.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.232-241
• /
• 1979

For the effective utilization of the fish resource in coastal regions, an investigation on optimum processing conditions and meat quality textured fish protein concentrate (FPC) was carried out with the fish meat of filefish and sardine. Optimum pH and sodium chloride content of fish meat were 7.5 and 1.0 %, respectively. The most effective soaking conditions were as follows ; soaking time, 30 min ; temperature of ethanol, 5 to $20^{\circ}C$ ; amount of added ethanol, 3 times the weight of the fishmeat paste ; repeated number of soaking in ethanol for filefish and sardine, 2 and 4, respectively. The ethanol remaining is meaty textured FPC could be removed effectively by forced-air drying. Yields of the product to the minced meat weight and the contents of protein lipid in meaty textured from filefish were 21.1, 77.6 and 0.2 % and those from sardine were 24.3, 75.8 and 3.6 %, respectively. Contents of essential amino acids in meaty textured FPC of filefish and sardine were not inferior to those of beef, textured soybean protein and FAO pattern. Beef meat could be substituted with the meaty textured FPC up to 50 % in the processing of typical meat balls and hamburger without any significant loss in its taste, odor and texture.