• 한국농공학회지
• /
• 제18권3호
• /
• pp.4163-4170
• /
• 1976

This study was conducted to investigate the effect of starch as a retarder on the maximum dry density and the unconfined compressive strength of soil cement mixtures for varied starch contents (0-3%), cement contents (3-12%), and delay times (0-6hrs) in four soils. The experimental results obtained from maximum dry density and unconfined compressive strength tests are as follows: 1. Maximum dry density and unconfined compressive strength were increased greatly in soil cement mixtues rwhen starch was added as retarder but their value schanged according to soil varieties. 2. Maximum dry density showed at about 0.5 percent to 1.0 percent of starch in KY soil and about 2.0 percent to 2.5 percent in SS soil when delay time was changed in 2.4, and 6 hours in compaction test. 3. The larger content of cement was, the bigger effects of maximum dry density and compressive strength were in soil cement. mixtures. 4. As delay time changed 2.4, and 6 hours in compaction test, 7-day unconfined compressive strength showed the biggest value at about 0.5 percent of starch in KY soil and 2.0 percent in SS soil, and the maximum value of 28-day unconfined compressive strength showed at about 0.5 percent in KY soil and 1.5 percent in SS soil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.300-303
• /
• 1999

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. So-called, it was the solvent washing dry, Three organic solvents (methanol, ethanol, and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol, and acetone were all available organic solvents for this method. The tapes washed in methanol, ethanol, and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated. The tape casting system was designed for the solvent washing dry and prepared. An homogeneous tape was established by continuous tape casting process.

• Journal of Ecology and Environment
• /
• 제43권4호
• /
• pp.376-384
• /
• 2019

Background: Nutrient release during litter decomposition was investigated in Vitex doniana, Terminalia avecinioides, Sarcocephallus latifolius, and Parinari curatellifolius in Makurdi, Benue State Nigeria (January 10 to March 10 and from June 10 to August 10, 2016). Leaf decomposition was measured as loss in mass of litter over time using the decay model W_t/W₀ = e-^{kd t}, while $Kd=-{\frac{1}{t}}In({\frac{Wt}{W0}})$ was used to evaluate decomposition rate. Time taken for half of litter to decompose was measured using T₅₀ = ln ²/k; while nutrient accumulation index was evaluated as $NAI=(\frac{{\omega}t\;Xt}{{\omega}oXo})$. Results: Average mass of litter remaining after exposure ranged from 96.15 g, (V. doniana) to 78.11 g, (S. lafolius) in dry (November to March) and wet (April to October) seasons. Decomposition rate was averagely faster in the wet season (0.0030) than in the dry season (0.0022) with P. curatellifolius (0.0028) and T. avecinioides (0.0039) having the fastest decomposition rates in dry and wet seasons. Mean residence time (days) ranged from 929 to 356, while the time (days) for half the original mass to decompose ranged from 622 to 201 (dry and wet seasons). ANOVA revealed highly significant differences (p < 0.01) in decomposition rates and exposure time (days) and a significant interaction (p < 0.05) between species and exposure time in both seasons. Conclusion: Slow decomposition in the plant leaves implied carbon retention in the ecosystem and slow release of CO₂ back to the atmosphere, while nitrogen was mineralized in both seasons. The plants therefore showed effectiveness in nutrient cycling and support productivity in the ecosystem.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.124-130
• /
• 2021

치과보철물의 심미적 결과를 조절하는 중요한 요인은 반투명도이며, 지르코니아 착색제의 건조 정도가 반투명도에 어떠한 영향을 미치는지 알아보고자 한다. 실험을 위해서 지르코니아 블록별로 원형 시편을 총 90개 제작하였다. 그 다음 지르코니아 시편을 착색제로 180초 침적 후 미건조(0초), 중간건조(30초), 완전건조(30분)의 건조시간(Dry time)을 부여한 후 지르코니아 소결로를 이용하여 원형 시편을 소결하였다. 분광광도계(Spectrophotometer CM-3600A, Konica Minolta, Japan)를 이용하여 흑색표준타일과 백색표준타일 위에 시편을 놓고, 표준광원 D65의 조건에서 정반사광 제거방식으로 지르코니아 원형 시편을 각각 측정하였다. 시편당 총 3번씩 반복측정하였다. 지르코니아의 건조시간에 따른 반투명도를 비교 분석하기 위하여 One-way ANOVA를 시행하였다. 지르코니아 종류별, 착색제에 따라 반투명도는 통계적으로 차이가 있었고(P < 0.001), 건조시간에 따라서는 통계적으로 차이는 없었다(P > 0.922). 그러나, 완전건조인 상태일 때, 반투명도 값이 작은 것으로 나타나 건조가 잘 될수록 지르코니아 색상이 투명하다는 것을 알 수 있었다.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.75-87
• /
• 2003

The water balance calculation in the IRL shows that fresh groundwater discharge is the primary factor, with surface runoff from gaged and ungaged areas as the second freshwater contributor. Precipitation and evaporation are almost in balance fer the entire IRL. Due to high freshwater discharge from ground-water, the annual net flow is outward from the IRL to the continental shelf of the Atlantic Ocean resulting in a relatively short flushing time, denoted as $T_{0.5}$ (50% flushing time) and $T_{0.99}$ (99% flushing time). $T_{0.5}$, and. $T_{0.99}$ without a tidal effect in the Northern IRL are 17 and 114 days, respectively, during the dry season. During the wet season, they are 10 and 65 days, respectively. Tidal flushing effects are considered in central IRL due to the proximity to Sebastian Inlet. In the Northern Central zone during dry season, $T_{0.5}$, and. $T_{0.99}$ are 6 and 43 days, respectively and during the wet season 5 and 33 days. In the Southern Central zone they are 2 and 16 days for the dry season,2 and 15 days for the wet season. High groundwater seepage into the IRL is considered to be a positive effect in maintaining relatively good water quality condition even with few narrow inlets.

• 한국농공학회지
• /
• 제28권4호
• /
• pp.66-76
• /
• 1986

This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.

• 한국작물학회지
• /
• 제57권4호
• /
• pp.418-423
• /
• 2012

감자 괴경의 비대 반응을 해석하여 재배기술을 개선하고자 2005년에 표고별 괴경의 비대반응을 분석하기 위하여 대관령(표고 800 m)과 진부(표고 600 m)에서 수미와 대서 2품종을 노지에서 시험하였다. 또한 파종시기별 괴경의 비대반응을 구명하고자 대관령(표고 800 m)에서 4월 19일부터 5월 19일까지 10일 간격으로 4시기에 노지에 파종하여 시험을 수행하였다. 표고에 따른 비대반응을 보면 총 건물중은 표고 800 m에 비하여 표고 600 m에서 전 생육기간 동안 높게 유지되었으며, 생육초기인 7월 6일(파종 후 58일)에 증가 정도가 가장 컸다. 총 건물중이 최고에 달한 시기는 표고 800 m에서는 파종 후 110~112일이었으며, 표고 600 m에서는 파종 후 108~111일로 표고 및 품종간에 큰 차이는 없었다. 주당 괴경 건물중은 표고 800 m에 비하여 표고 600 m에서 7월 6일(파종 후 58일)은 적었으나 7월 21일(파종 후 73일) 이후부터는 높게 유지되는 경향이었으며, 2지역 모두 7월 6일(파종 후 58일)부터 8월 8일(파종 후 91일)에 주당 괴경 건물중의 증가정도가 컸다. 주당 괴경 건물중이 최고에 달한 시기는 표고 800 m에서는 파종 후 118~125일이었으며, 표고 600 m에서는 파종 후 118~124일로 표고 간에는 유사하였다. 괴경당 건물중은 표고 600 m에 비하여 표고 800 m에서 증가되었다. CGR은 표고 800 m에 비하여 표고 600 m에서 생육초기인 7월 6일(파종 후 58일)에 증가 정도가 가장 컸다. 파종시기별 괴경의 비대반응은 괴경 건물중(수확시기)은 총 건물중과 동일한 경향으로 수미는 4월 29일 파종 시 가장 증가되었으며, 대서는 수미에 비해 10일이 빠른 4월 19일 파종 시 가장 증가되었다. 괴경의 건물중은 6월 30일부터 8월 8일에 증가정도가 가장 컸다. 주당 괴경 건물중이 최고에 달한 시기는 4월 19일 파종 시는 파종 후 139~144일, 5월 9일 파종 시는 파종 후 121~126일, 5월 19일 파종 시는 파종 후 111~113일로 파종시기가 늦을수록 단축되었다.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.662-668
• /
• 2016

No-tillage dry-seeding of rice can offer potential benefits by reducing time and labor cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil hardness in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. The seedling stand fell within optimum range for both no-till dry-seeding and wet-hill-seeding on puddled paddy. Plant height, number of tillers and SPAD values in no-tillage dry-seeding cultivation were higher than those observed in other methods. There were no significant differences in grain yield of rice among three cultivation methods. The quality characteristics of milled rice grown in no-tillage dry-seeding were similar to those grown in other cultivation methods. Soil hardness in top 10 cm depth was significantly higher in no-tillage dry-seeding than other cultivation methods, while soil hardness below 10 cm depth was highest in machine transplanting cultivation. Results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yield and grain quality.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.115-124
• /
• 2013

Among the several options to solve PWR spent fuel accumulation problem in Korea, the dry storage method could be the most realistic and applicable solution in the near future. As the basic objectives of dry storage are to prevent a gross rupture of spent fuel during operation and to keep its retrievability until transportation, at the same time the importance of a spent fuel integrity evaluation that can estimate its condition at the final stage of dry storage is very high. According to the national need and technology progress, two representative nations of spent fuel dry storage, the USA and Japan, have established different system temperature criteria, which is the only controllable factor in a dry storage system. However, there are no technical criteria for this evaluation in Korea yet, it is necessary to review the previously well-organized methodologies of advanced countries and to set up our own domestic evaluation direction due to the nation's need for dry storage. To satisfy this necessity, building a domestic spent fuel test database should be the first step. Based on those data, it is highly recommended to compare domestic data range with foreign results, to build our own criteria, and to expand on evaluation work into recently issued integrity problems by using a comprehensive integrity evaluation code.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.79-82
• /
• 2003

In case of performing resin transfer molding (RTM), race track effects and non-uniform fiber volume fraction may cause undesirable resin flow pattern and thus result in dry spots, which affect the mechanical properties of the finished parts. In this study, a real time RTM control strategy to reduce these unfavorable effects is proposed. Through numerical simulations and experiments, the validity of the proposed scheme is demonstrated.