• 멤브레인
• /
• 제15권2호
• /
• pp.147-156
• /
• 2005

폴리이서설폰은 상용화된 엔지니어링 고분자 소재 중에서 이산화탄소/질소 및 이산화탄소/메탄의 분리 능력이 아주 우수하면서 이산화탄소에 대한 가소화에 대한 저항력이 아주 뛰어난 것으로 알려져 있다[1-4]. 본 연구에서는 연소 배가스내 이산화탄소의 분리/회수를 위하여 건-습식 상전이법에 의해 비대칭구조의 폴리이서설폰 중공사막을 제조하였다. 제막용액은 고비점이면서 폴리이서설폰의 용매인 NMP와 저 비점의 폴리이서설폰의 팽윤제인 acetone를 일정한 조성으로 함께 녹여서 제조하였다. 방사용액의 농도, NMP와 acetone의 비, 방사높이, 증발조건, 실리콘 코팅조건을 변화시키면서 중공사를 제조하였으며, 얻어진 중공사막의 이산화탄소와 질소에 대한 기체투과도와 선택도는 순수기체를 통하여 측정하였다. 최적의 PES 중공사막은 PES/Acetone/NMP = 30/35/35 $wt\%$ 방사용액과 실리콘의 코팅조건하에 제조된 것으로 폴리이서설폰 소재 자체의 고유선택도인 $30\~40$의 $CO_2/N_2$ 선택도를 보였으며 $25\~50$ GPU의 이산화탄소 투과플럭스를 보였다. 이러한 선택도와 투과도로부터 계산된 중공사 외표면의 선택층의 두께는 $0.1\;{\mu}m$였다. 제조된 폴리이서설폰중공사막이 향후 연소 배가스내 이산화탄소 분리/회수용 막분리 공정에 적용될 경우 우수한 결과를 보일 것으로 예측된다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.125-134
• /
• 2006

Process & mechanism $\blacklozenge$ The process consists from two steps which are laser processing step and separation steop. $\blacklozenge$ The wavelength of laser beam is transmissible wavelength for the wafer. However, inside of Si wafer is processed due to temperature dependence of optical absorption coefficient Advantage & Application $\blacklozenge$ Advantages are high speed dicing, no debris contaminants, completely dry process, etc. $\blacklozenge$ The cutting edges were fine, The lifetime and endurances did not degrade the device characteristics $\blacklozenge$ A separation of a wafer with DAF was introduced as an application for SiP

• 에너지공학
• /
• 제7권2호
• /
• pp.180-186
• /
• 1998

본 연구에서는 벤토나이트 혼합액의 유동특성 등을 파악하기 위형 전단속도에 따른 점도의 변화를 측정하였으며, 박막형성에 관한 특성을 파악하기 위하여 혼합비 및 점도에 따른 박막두께를 측정하였다. 또한 건조 후 박막이 박막의 두께에 따른 오염표면에서 분리되는 특성을 조사하였으며 벤토나이트의 흡착성능에 영향을 미치는 비표면적을 측정하기 위하여 BET 방법을 이용하였다. 점도는 혼합비의 증가에 따라 감소하였으며 건조박막의 두께는 혼합비가 증가할수록 두꺼워진다. 건조박막의 분리특성은 혼합비가 5에서 10% 이내로 박막이 40에서 150$\mu\textrm{m}$가 적당하다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.23-26
• /
• 1999

Urethane block copolymers, containing soft segments such as polydimethylsiloxane (PDMS), polytertramethylene glycol(PTMG) and PEO-PPO-PEO (Poloxamer) block copolymer, were synthesized and examined for th vapor- phase separation of toluene from nitrogen stream by using vapor permeation equipment. Generally permeabilities of PTMG and PDMS based urethane membranes were higher than those of Poloxamer based urethane membranes. Organic vapor permeability in the PDMS and PTMG soft segment urethane membranes were greater than those measured in the Poloxamer films, due to more polymer swelling. The membranes performed best with toluene, with toluene/dry N2 seletivities ranging from 120~200 and permeablilities as high as 23$\times$10-9 mol/m2sPa for saturated toluene feeds at 23$^{\circ}C$.

• KSBB Journal
• /
• 제16권2호
• /
• pp.115-122
• /
• 2001

Molecular imprinting has now been established as a technique which allows the creation of tailor-made binding sites for many classes of compounds. MIPs were prepared by covalent and non-covalent chemical bonding systems, by interactions between functional monomer and template. The shape of MIP is divided to particle and membrane. MIP membranes can be prepared by surface imprinting, in-situ polymerization, wet phase inversion and the dry phase inversion method. MIPs have been mainly used for analytical separation and biosensor systems to separate and detect chiral compounds and materials with similar structures. However the application of MIP by the chemical industries is still in its infancy stages. This review summarizes the preparative characteristics and applications of MIP with respect to chiral separations and biosensors.

• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.141-148
• /
• 2006

This study was carried out to analyze the microstructure characteristics of electrolyte membrane through XRD, SEM and AC impedance measurement for using in high temperature steam electrolysis(HTE). It was investigated that thermal stability and electric characteristics by sintering condition using dry and wet process, and confirmed growth of particle and density change by sintering temperature. The sintering temperature and behavior had an effect on the relative density of the ceramic and the average grain size. The more amount of dispersant in organic compound increase, the more the density increased. But the binder was shown opposite phenomenon. It was analyzed that electrolyte resistance and electrical characteristics using AC impedance. The electrical properties of YSZ grain boundary changed with the sintering temperature.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.373-379
• /
• 2018

A transparent, freestanding Porous Aromatic Framework-97 (PAF-97) membrane was successfully synthesized via a one-step acid-catalyzed reaction. Due to the introduction of ether groups, the obtained PAF-97 membrane possesses enhanced structural flexibility, thus increasing the flexibility of the resulting membrane. This is proofed by the fact that the feeding pressure of the membrane reaches as high as 5.5 bar during the separation of gas mixtures. The Young's moduli of the membrane were 6.615 GPa and 11.11 GPa, either in a dry or hydrated state respectively. To be highlighted, under a feeding pressure of 3.6 bar, the PAF-97 membrane rendered the permeance values of $2.90{\times}10^{-7}$, $1.29{\times}10^{-8}mol\;m^{-2}s^{-1}Pa^{-1}$ for $CO_2$ and $CH_4$, respectively, with a $CO_2/CH_4$ permselectivity of 22.48.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.267-270
• /
• 2003

백화사설초에 함유되어 있는 oleanolic acid를 세포배양을 이용하여 생산하기 위한 연구를 수행하였다. Oleanolic acid를 생산하기 위해, 백화사설초의 캘러스와 현탁세포를 2,4-D 0.5 mg/L, kinetin 0.1 mg/L가 포함된 SH 배지에서 유도하였다. Oleanolic acid의 분석을 위해, Rexchrom S5-100-ODS column을 사용한 HPLC를 이용하였다. 분석 결과, oleanolic acid의 retention time은 12.6분 이었고, 그 양은 0.41 mg/g dry weight였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.236-239
• /
• 2003

The spent fuel slitting device is an equipment developed in order to feed UO$_2$pellet to the dry pulverizing/mixing device. In this study, we have compared and analyzed the handling method of the slitting and that of the pellet and hull, processing time, separating time for 20kgHM, the number of blades, on the existing slitting device using in DUPIC, and spent fuel management technology research and test facility. Also, we have compared and analyzed about an advantage and weak point, designing and producing, processing, establishment, operation, maintenance about the vertical and horizontal slitting device. Based on these results, we have developed the vertical slitting device. By using the results, we have enhanced the slitting processing time(over 40%)in comparison with DUPIC device, and it will is effectively applied to available data for designing and producing of the hot test facility.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.318-324
• /
• 2003

The nano-scale crystallite sizes of uranium oxide powders in simulated spent fuel were measured by the neutron diffraction line broadening method in order to analyze the sintering behavior of the dry process fuel. The mixed $UO_2$ and fission product powders were dry-milled in an attritor for 30, 60, and 120 min. The diffraction patterns of the powders were obtained by using the high resolution powder diffractometer in the HANARO research reactor. Diffraction line broadening due to crystallite size was measured using various techniques such as the Stokes' deconvolution, profile fitting methods using Cauchy function, Gaussian function, and Voigt function, and the Warren-Averbach method. The non-uniform strain, stacking fault and twin probability were measured using the information from the diffraction pattern. The realistic crystallite size could be obtained after separation of the contribution from the non-uniform strain, stacking fault and twin.